Difference between revisions of "Characteristic of Slican DPH doorphones"

From pubWiki-en
Jump to: navigation, search
(Created page with "Bramofony DPH firmy Slican podłączone do centrali telefonicznej umożliwiają komunikowanie się osób, które pragną wejść na teren zamknięty, z osobami znajdującymi się...")
 
 
(12 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
Bramofony DPH firmy Slican podłączone do centrali telefonicznej umożliwiają komunikowanie się osób, które pragną wejść na teren zamknięty, z osobami znajdującymi się na tym terenie, za pośrednictwem sieci telefonicznej istniejącej na tym terenie. Możliwe jest również wyzwolenie elektrozamka sterującego otwarciem drzwi lub bramy z telefonu podłączonego do centrali telefonicznej. Bramofony DPH posiadają następujące cechy funkcjonalne:
+
{{Warning|
−
* realizacja połączenia telefonicznego za pomocą przycisku pojemnościowego
+
Slican doorphones DPH.AB with DG note mean new colour version – Dark Graphite. Funcionally they do not differ from version without DG}}
−
* sterowanie dwoma przekaźnikami
+
 
−
** elektrozaczepu (EZ)
+
 
−
** dodatkowym (STA)
+
Slican DPH.AB doorphones connected to PBX via an existing telephone network allows people who intend to enter closed area to communicate with persons in that area. Also it allows enter to protected area by activating electrolock which control opening of door or gate:
−
* zasilanie napięciem 12V AC lub DC
+
 
−
* wejścia COD (czujnik otwarcia drzwi) i POD (przycisk otwarcia drzwi). Oba wejścia współpracują z elektrozaczepem.
+
* using telephone being called by selecting appropriate DTMF code on acoustics - * (asterisk), digit 1 or 2
−
* wyzwolenie EZ (otwarcie) w wyniku odbioru "*" w DTMF
+
* RFID version - proximity identifier
−
* możliwość wyzwolenia EZ w wyniku przyłożenia zarejestrowanej karty RFID
+
* pressing POD button (door open button)
−
* wyzwolenie STA (drugie wyjście) w wyniku odbioru "1" w DTMF. Generowany jest pojedynczy impuls o stałym czasie trwania
+
 
−
* programowanie parametrów bramofonu z telefonu przy użyciu DTMF
+
 
 +
DPH doorphones have following functional features:
 +
 
 +
* making a phone call using the capacitive button
 +
* controlling two outputs with:
 +
** electrolock (EZ)
 +
** additional relay (STA)
 +
* power suppply: 18-25V AC lub 14-35V DC
 +
* operating temperature range: -20 to +50<sup>o</sup>C
 +
* security level - IP32
 +
* detection of PBX notification signal (INACCESS):
 +
** frequency: 425Hz (+- 25Hz)
 +
* Busy signal detection (BUSY):
 +
** frequency: 425Hz (+- 25Hz)
 +
** signal/silence duration: 352ms - 608ms
 +
** number of consecutive signal and silence sequences detected: 3
 +
* detection of unreachable signal (CONGESTION):
 +
** frequency: 425Hz (+- 25Hz)
 +
** signal/silence duration: 192ms - 320ms
 +
** number of consecutive signal and silence sequences detected: 3
 +
* COD (door open sensor) and POD (door open button) inputs. Both inputs cooperate with electrolock
 +
* EZ or STA trigger (open) as result of receiving "*" in DTMF, depending on setting of corresponding parameter
 +
* EZ trigger as result of receiving "1" in DTMF
 +
* STA trigger (second output) as result of receiving "2" in DTMF. Single pulse of constant duration is generated
 +
* built-in RFID card reader (cards Unique 125kHz standard, compatible with EM4102 chip - doorphone version without RFID are also available)
 +
* option of EZ or STA triggering as result of approaching registered RFID card (in selected versions)
 +
* programming doorphone from phone using DTMF codes

Latest revision as of 11:04, 1 June 2020

Warning!

Slican doorphones DPH.AB with DG note mean new colour version – Dark Graphite. Funcionally they do not differ from version without DG


Slican DPH.AB doorphones connected to PBX via an existing telephone network allows people who intend to enter closed area to communicate with persons in that area. Also it allows enter to protected area by activating electrolock which control opening of door or gate:

  • using telephone being called by selecting appropriate DTMF code on acoustics - * (asterisk), digit 1 or 2
  • RFID version - proximity identifier
  • pressing POD button (door open button)


DPH doorphones have following functional features:

  • making a phone call using the capacitive button
  • controlling two outputs with:
    • electrolock (EZ)
    • additional relay (STA)
  • power suppply: 18-25V AC lub 14-35V DC
  • operating temperature range: -20 to +50oC
  • security level - IP32
  • detection of PBX notification signal (INACCESS):
    • frequency: 425Hz (+- 25Hz)
  • Busy signal detection (BUSY):
    • frequency: 425Hz (+- 25Hz)
    • signal/silence duration: 352ms - 608ms
    • number of consecutive signal and silence sequences detected: 3
  • detection of unreachable signal (CONGESTION):
    • frequency: 425Hz (+- 25Hz)
    • signal/silence duration: 192ms - 320ms
    • number of consecutive signal and silence sequences detected: 3
  • COD (door open sensor) and POD (door open button) inputs. Both inputs cooperate with electrolock
  • EZ or STA trigger (open) as result of receiving "*" in DTMF, depending on setting of corresponding parameter
  • EZ trigger as result of receiving "1" in DTMF
  • STA trigger (second output) as result of receiving "2" in DTMF. Single pulse of constant duration is generated
  • built-in RFID card reader (cards Unique 125kHz standard, compatible with EM4102 chip - doorphone version without RFID are also available)
  • option of EZ or STA triggering as result of approaching registered RFID card (in selected versions)
  • programming doorphone from phone using DTMF codes
Retrieved from "http://pubwiki.slican.com/index.php?title=Characteristic_of_Slican_DPH_doorphones&oldid=7871"