DPH.IP Connecting devices of DPH.IP family

From pubWiki-en
Revision as of 13:55, 29 June 2020 by Leszekj (Talk | contribs) (Created page with "= Connecting two devices to EZ = Building an ACS based on DPH.IP devices (KS1, KS4, KS16, CR0) should pay attention to connection of individual system components. <br> When yo...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Connecting two devices to EZ

Building an ACS based on DPH.IP devices (KS1, KS4, KS16, CR0) should pay attention to connection of individual system components.
When you connecting DPH.IP doorphone on one side and CR0RF card reader on other side to one EZ, connect appropriate contact inputs (according to diagram below) and program in PBX:

  • connect 'EZ' output of TBRD.CR to 'EZ'
  • connect 'POD' input of TBRD.CR with 'EZ' output of DPH.IP
DPHIP CR0RF 1EZ eng.png


PBX configuration:

  • IPx/CCT/MAC
    • for DPH.IP doorphone in ConfigMAN Peripherals/Doorphones/DPH.IP/Hardware settings set option:
      • OpMD (Output mode 'EZ' ): Switched off
    • for CR0RF reader in ConfigMAN Peripherals/Doorphones/DPH.IP/Hardware settings set options:
      • POD (POD): Button
      • NmPOD (Normal POD state): Normally open
  • NCP
    • for DPH.IP doorphone, set 'EZ' output in mode: normally off
    • for CR0RF reader, set 'POD' input:
      • idle: normally open
      • mode: door open button