Difference between revisions of "DPH - Doorphone connection"

From pubWiki-en
Jump to: navigation, search
 
(11 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
Connecting doorphone can be executed via appropriate cables connected to connecting terminal located on doorphone PCB. Connecting terminal is visible and accessible afer unscrewing front panel, this operation is described in chapter [[DPH - Opening doorphone casing|2.2 DPH - Opening doorphone casing]].
 
Connecting doorphone can be executed via appropriate cables connected to connecting terminal located on doorphone PCB. Connecting terminal is visible and accessible afer unscrewing front panel, this operation is described in chapter [[DPH - Opening doorphone casing|2.2 DPH - Opening doorphone casing]].
−
{{warning|Before connecting cables to connecting terminal, cables should be bring into the casing via hole located on casing backside.}}
+
 
−
Connections located in connection terminal, usetd to doorphone installation are presented in following table:
+
 
 +
{{warning|
 +
Before connecting cables to connecting terminal, cables should be bring into the casing via hole located on casing backside.}}
 +
 
 +
 
 +
=Connections located in connection terminal used to doorphone installation=
 
<center>
 
<center>
 
{|{{Prettytable}}
 
{|{{Prettytable}}
Line 7: Line 12:
 
|[[File:Ikona uziemiena biała.PNG]] || earthing (for proper operation of doorphone over-voltage protection)
 
|[[File:Ikona uziemiena biała.PNG]] || earthing (for proper operation of doorphone over-voltage protection)
 
|-
 
|-
−
|LA  ||rowspan="2"| linia abonencka z centrali (polaryzacja nie jest istotna)
+
|LA  ||rowspan="2"| PBX subscriber line (polarity is not important)
 
|-
 
|-
 
|LA
 
|LA
 
|-
 
|-
−
|EZ  ||rowspan="2"| elektrozaczep, 12V DC, max 0.7A  
+
|EZ  ||rowspan="2"| electrolock power supply; program mode setting: NO (switching on voltage) - electromagnetic lock/NC (switching off voltage) – electromagnetic keeper; '''source voltage: 12V, max. source load: 0.7A'''
 
|-
 
|-
 
|EZ
 
|EZ
 
|-
 
|-
−
|STA  ||rowspan="2"| odizolowany styk zwierny przekaźnika do sterowania urządzeniami dodatkowymi - dopuszczalne napięcie na stykach to max 24V AC STA Max 0.7A
+
|STA  ||rowspan="2"| isolated relay contact (NO) for controlling additional devices; programming operating mode: Gate/Light; '''max: load contact 32V AC/DC 1A'''
 
|-
 
|-
 
|STA
 
|STA
 
|-
 
|-
−
|AC  ||rowspan="2"| zaciski zasilania 14 - 35VAC lub 12 - 25 VDC
+
|AC  ||rowspan="2"| power supply connections '''14 - 35V DC or 18 - 25V AC'''
 
|-
 
|-
 
|AC
 
|AC
 
|-
 
|-
−
|COD || czujnik otwarcia drzwi - rozwarcie względem GND skraca czas działania przekaźnika EZ
+
|COD || opening door sensor - disconnection from GND decrease EZ relay operation time
 
|-
 
|-
−
|POD || przycisk otwarcia drzwi (względem GND)
+
|POD || opening door button (relative to GND)
 
|-
 
|-
−
|GND || masa dla sygnałów POD, COD
+
|GND || ground for POD, COD signals
 
|}
 
|}
 
</center>
 
</center>
−
Schemat połączeniowy bramofonu DPH przedstawia poniższy rysunek.
+
 
−
[[Plik:Schemat podlaczenia DPH.png]]<br>
+
 
−
Zasilanie bramofonu DPH może być realizowane zarówno prądem stałym, jak i prądem zmiennym. Urządzenie zasilające powinno zostać tak dobrane, aby jak najlepiej zaspokajać potrzeby użytkownika. W związku z rozlicznymi możliwościami w tym zakresie, firma Slican nie sprzedaje wraz z domofonem DPH żadnego urządzenia zasilającego, pozostawiając jego wybór do decyzji użytkownika. W ofercie firmy Slican - jako odrębna pozycja katalogowa znajduje się transformator prądu zmiennego TRS10-V18-N, o nominalnym napięciu 18V, spełniający wszelkie wymogi zasilania bramofonu DPH. Zdjęcie oferowanego transformatora przedstawiono poniżej:
+
=Connection scheme of doorphone DPH=
−
<center> [[Plik:Trafo TRS10-V18-N.png]]</center>
+
 
 +
 
 +
{{warning|
 +
Automation control that requires a short circuit can be connected only to STA output}}
 +
 
 +
<center>[[File:Schemat podlaczenia DPH.png|800px]]</center><br>
 +
 
 +
 
 +
{{warning|
 +
Connecting live wires to EZ terminals may cause permanent damage to device}}
 +
 
 +
 
 +
=Power supply=
 +
DPH doorphone supply can be realized using AC or DC. Power supply device should be selected according user needs. Due to wide possibilities, Slican company doesn't sell power supply device together with DPH doorphone, it remain to user decision. In Slican offer - as a separate position in price list - there is AC transformer TRS10-V18-N, with nominal voltage equal to 18V, this transformer fulfil supply requirements of DPH doorphone. Below is presented mentioned above transformer:
 +
 
 +
 
 +
<center> [[File:Trafo TRS10-V18-N.png]]</center>

Latest revision as of 06:51, 2 June 2020

Connecting doorphone can be executed via appropriate cables connected to connecting terminal located on doorphone PCB. Connecting terminal is visible and accessible afer unscrewing front panel, this operation is described in chapter 2.2 DPH - Opening doorphone casing.


Warning!

Before connecting cables to connecting terminal, cables should be bring into the casing via hole located on casing backside.


Connections located in connection terminal used to doorphone installation

Ikona uziemiena biała.PNG earthing (for proper operation of doorphone over-voltage protection)
LA PBX subscriber line (polarity is not important)
LA
EZ electrolock power supply; program mode setting: NO (switching on voltage) - electromagnetic lock/NC (switching off voltage) – electromagnetic keeper; source voltage: 12V, max. source load: 0.7A
EZ
STA isolated relay contact (NO) for controlling additional devices; programming operating mode: Gate/Light; max: load contact 32V AC/DC 1A
STA
AC power supply connections 14 - 35V DC or 18 - 25V AC
AC
COD opening door sensor - disconnection from GND decrease EZ relay operation time
POD opening door button (relative to GND)
GND ground for POD, COD signals


Connection scheme of doorphone DPH

Warning!

Automation control that requires a short circuit can be connected only to STA output


Schemat podlaczenia DPH.png


Warning!

Connecting live wires to EZ terminals may cause permanent damage to device


Power supply

DPH doorphone supply can be realized using AC or DC. Power supply device should be selected according user needs. Due to wide possibilities, Slican company doesn't sell power supply device together with DPH doorphone, it remain to user decision. In Slican offer - as a separate position in price list - there is AC transformer TRS10-V18-N, with nominal voltage equal to 18V, this transformer fulfil supply requirements of DPH doorphone. Below is presented mentioned above transformer:


Trafo TRS10-V18-N.png
Retrieved from "http://pubwiki.slican.com/index.php?title=DPH_-_Doorphone_connection&oldid=7876"