MAB-1101 Instruction manual

From pubWiki-en
Jump to: navigation, search
Multi Audio Box
MAB-1101
Installation and operation manual v1.02


MAB 1101 S.jpg



SLICAN Sp. z o.o.
www.slican.pl
e-mail: office@slican.pl


„Manufacturer reserves right to modify the product without prior notice.”

Connecting and preparing configuration

MAB-1101 is equipped in following input/output ports:

  • LINE socket type RJ11 for connecting PBX subscriber port,
  • PHONE socket type RJ11 for connecting analogue phone,
  • AUDIO in/out socket type mini Jack.
    • in IN mode there is possible to connect headphone of audio device ex. MP3 Player.
    • in OUT mode it is possible to connect input of audio card,
  • microphone inside MAB-1101 enables to listen premise.

Configuration settings

  • jumpers X1-X5 are used for selection of function fulfilled by MAB-1101,
  • jumper X6 enables to increasing amplification (boost) of microphone or IN signal,
  • changes in jumper location should be done after disconnection of telephone line
Jumper location
function no X1 X2 X3 X4 X5 X6
REC 3
2
1
OUT 3
2
1
IN
normal
3
2
1
IN
boost
3
2
1
MIC
normal
3
2
1
MIC
boost
3
2
1
Warning! If device is configure to fulfill OUT or REC function, it is recommended to set X6 jumper in NORMAL positiion.


Example configurations

MAB funkcje in.png MAB funkcje mic.png
MAB funkcje out.png MAB funkcje rec.png