ITS - Connecting with PC

Connecting PC with PBX can be done using Internet browser. Congruent browser are listed below:

Congruent www browsers

• FireFox 3.5.x and 3.0.x - recommended by manufacturer
• Google Chrome 3.x

What IP address is assigned to Slican ITS by DHCP server? - *947

Warning! To listen IP address code *947 should be dialed from tone phone connected to any FXS port

• Listened address should be entered to browser address bar and confirmed by Enter.
• Default access password: slican

Above mentioned setting (Slican ITS is DHCP client) is default.

I haven't network with DHCP server - what is default PBX IP address?

Warning! To assign default IP address and switch off DHCP server, code *930 should be dialed from tone phone connected to any FXS port

• Selecting service *930 causes:
  • switching off DHCP client (if it wasn't switched off earlier), it is confirmed by voice message "Service accepted", then after circa 3 seconds PBX resets automatically. After reset following network settings are stored in PBX:
    IP - 192.168.0.247
    MASK - 255.255.255.0
    GATEWAY- 192.168.0.1
    DNS - 194.204.159.1
  • no settings change (if DHCP was switched off earlier), it is confirmed by voice message "Service active".

---

Back