View source for NCP-SW24G2SW.P150.1BC

NCP-SW24G2SW.P150.1BC - this is universal gigabit switch for connecting Ethernet devices operating or linking their segments. It was designed mainly to extend capabilities of Slican IP telephone systems. It can also be used in virtually any computer network, not necessarily related to telecommunications system. Product was made in accordance with latest solutions and technological trends. It includes number of innovative hardware and software solutions, allowing for advanced configuration, as well as controlling and shaping Ethernet traffic.


<center>[[File:Switch_1U_NCP-SW24G2SW.jpg|700px]]</center>


NCP-SW24G2SW.P150.1BC - managed layer 2 switch with layer 3 elements:
* with possibility of connecting devices via UTP twisted pair or optical fiber
* with possibility of extension with a buffer power supply system 
* with PoE supply on 24 RJ45 ports (total power of powered devices - 150W) 
* support for management via website and CLI command line


Basic features:
* 2 ports SFP - with SFP optical port. Connection to optical network, depending on type of optical fiber used, is realized using additional single-mode or multi-mode SFP inserts.
* 24 electrical ports with auto negotiation - 10/100/1000Mbit - with PoE power supply in the IEEE802.3af/at standard
* RS232 terminal port - programming and configuration preview
* auto MDI / MDI-X functionality on ports - automatic detection whether additional device is connected with a cross or straight Ethernet cable
* automatic detection and power-on for PoE devices
* compliance with IEEE802.3, IEEE802.3u, IEEE802.3ab and IEEE802.3X standards
* standard 802.1Q VLAN support (access/trunk/hybrid)
* automatic learning and aging of MAC addresses, address list capacity - 8K
* manual aggregation and static LACP support
* support for mirroring multiple ports to one
* port MAC address binding support
* HTTPS, SSL v3, tls v1, ssh v1/v2, SNMP v1/v2/v3 protocols support
* RMON, syslog and port traffic statistics support


[[Main_Page | Return]]