Leszekj: Created page with "Since firmware version 1.2.46 - new functionality has been added - SwitchHOOK. New doorphone control mode was introduced - new way to use buttons and maximum time for calling..."

2020-06-03T10:06:12Z

Created page with "Since firmware version 1.2.46 - new functionality has been added - SwitchHOOK. New doorphone control mode was introduced - new way to use buttons and maximum time for calling..."

New page

Since firmware version 1.2.46 - new functionality has been added - SwitchHOOK.
New doorphone control mode was introduced - new way to use buttons and maximum time for calling and talking have been changed.

Description of SHK mode:

* when button is pressed for minimum of 300ms new call is generated
* connection is initiated by means of pulse edge (rising or falling) - eg. change from short circuit to break or vice versa from break to short circuit
* connection (calling and conversation) continues until button is released or connection is disconnected by PBX
* maximum call time is 18 hours

{{warning |
For 1 and 2-button doorphones with capacitive keypad, switching on SHK mode will make it impossible disconnect connection from doorphone side}}

In order to properly configure functionality:
* in PBX - Global settings / System commands sheet - enter system variable: RingTime_Doorphone <1 ... 65000sek>. It specifies maximum call time
* in doorphone - configure button operation accordingly. For two-button models they can be programmed independently.

Configuring SHK mode on the adapter:
* using DTMF (X / Y- 6/3) - [http://pubwiki.slican.com/index.php/DPH_-_Doorphone_programming according to DPH programming table]
* in configuration file (SHKMode field) - [http://pubwiki.slican.com/index.php/DPH_-_USB_interface_using Use_interface_USB as described by USB programming]
** Possible configuration:
*** 0 - no button is SHK (default)
*** 1 - BUTTON1 works in SHK mode
*** 2 - BUTTON2 works in SHK mode
*** 3 - BUTTON1 and BUTTON2 works in SHK mode

Operation of button that is not in SHK mode has not been changed.
The buttons work independently. (e.g. if you configure 2 buttons as SHK, you can disconnect connection from button with which connection was established).

----
[[DPH_1-_and_2-button_doorphone_v1_02 | Return]]

DPH - SwitchHook functionality - Revision history

Leszekj: Created page with "Since firmware version 1.2.46 - new functionality has been added - SwitchHOOK. New doorphone control mode was introduced - new way to use buttons and maximum time for calling..."