Difference between revisions of "ITS - Outgoing calls"
From pubWiki-en
(→Outgoing rule - number dialing scenario) |
(→Outgoing rule - number dialing scenario) |
||
| Line 33: | Line 33: | ||
# Select field '''Exit 1''' which defines line(s) to be used as first to establishing outgoing call. Similarly you should select fields '''Exit 2''' and '''Exit 3''' - parameters in these fields will be used if call cannot be established via line defined in '''Exit 1'''. | # Select field '''Exit 1''' which defines line(s) to be used as first to establishing outgoing call. Similarly you should select fields '''Exit 2''' and '''Exit 3''' - parameters in these fields will be used if call cannot be established via line defined in '''Exit 1'''. | ||
# For specified '''Exit''' dedicated line or All lines of any type can be select ([[Slican_ITS#Port name shortcuts |FXO or IPO]]). | # For specified '''Exit''' dedicated line or All lines of any type can be select ([[Slican_ITS#Port name shortcuts |FXO or IPO]]). | ||
| − | # Selection of option '''All [[Slican_ITS#Port name shortcuts |FXO or IPO]]''' means, that trunks belong to specified type will be seized | + | # Selection of option '''All [[Slican_ITS#Port name shortcuts |FXO or IPO]]''' means, that trunks belong to specified type will be seized cyclically. |
|{{align|center}}|[[File:Outgoing_calls_2.PNG]]<br> Scenario tables: '''Outgoing rule''' 1/2 | |{{align|center}}|[[File:Outgoing_calls_2.PNG]]<br> Scenario tables: '''Outgoing rule''' 1/2 | ||
Revision as of 08:21, 12 August 2010
Contents
Outgoing methods
ITS offers 3 methods of realizing outgoing calls:
- Outgoing via 0
- Generic - automatic outgoing,
- Manual selection of specified outgoing line(FXO or IPO)
|
Outgoing via zero
Starting from firmware version 1.01.1080 global option, which interprets as outgoing all numbers with zero, was added. Settings this option is available in pane Global options: Reaching public newtork by 0. Further steps should be the same as for option: Generic - automatic outgoing.
Generic - automatic outgoing
|
| Pane Subscribers (FXS) or IP Subscribers (IPS) section Additional options For every subscriber one of following outgoing option should be set: Outgoing ruleFor specified subscriber one of following outgoing rules can be assigned: Outgoing rule 1 or Outgoing rule 2, Fixed assignment of specified outgoing line FXO or IPOIt means, that specified subscriber, independently on dialed number will be routed via assigned in configuration outgoing line. |
 Selection of outgoing calls scenario. By default: Outgoing rule 1 |
Outgoing rule - number dialing scenario
| For specified subscribers one of two outgoing scenario can be set: Outgoing rule 1 or Outgoing rule 2 Configuration of scenario: Outgoing rule:
|
 Scenario tables: Outgoing rule 1/2 |
Options All FXO's/All IPO's
- Zajmowanie linii dla opcji: Wszystkie FXO: LiniaPOTS 41->LiniaPOTS 42->LiniaPOTS41 itp....zajmowanie naprzemienne. Można również używać jeśli jest podłączona tylko jedna linia.
- Zajmowanie linii dla opcji: Wszystkie IPO: LiniaIP 51->LiniaIP 52->LiniaIP 53->LiniaIP 54->LiniaIP 51 itp....czyli następna po ostatnio zajętej.
Examples of configuration using Outgoing calls scenario
| Lp. | Wymagania / Założenia | Jak to zrobić ? Wygląd zawartości panelu: Ruch wychodzący |
|---|---|---|
| 1. | Wszystkie połączenia mają wychodzić w kolejności przez:
|
|
| 2. | Wszystkie połączenia mają wychodzić jak w przykładzie 1 za wyjątkiem połączeń:
|
|
| 3. | Biuro w domu z faksem i modemem.
Porty należy podzielić na 2 grupy:
|
Ruch wychodzący 1 Ruch wychodzący 2 
|
| 4. | Dom dwurodzinny Rodzice+Dzieci.
Porty należy podzielić na 2 grupy:
|
Ruch wychodzący 1 Ruch wychodzący 2 
|
