Difference between revisions of "MAB-1101 Instruction manual"

From pubWiki-en
Jump to: navigation, search
(→‎Configuration settings)
(→‎Connecting and preparing configuration)
 
(5 intermediate revisions by the same user not shown)
Line 23: Line 23:
 
MAB-1101 is equipped in following input/output ports:
 
MAB-1101 is equipped in following input/output ports:
  
−
* LINE socket type RJ11 for connecting PABX subscriber port,
+
* LINE socket type RJ11 for connecting PBX subscriber port,
 
* PHONE socket type RJ11 for connecting analogue phone,
 
* PHONE socket type RJ11 for connecting analogue phone,
 
* AUDIO in/out socket type mini Jack.  
 
* AUDIO in/out socket type mini Jack.  
Line 32: Line 32:
 
= Configuration settings =
 
= Configuration settings =
 
* jumpers X1-X5 are used for selection of function fulfilled by MAB-1101,
 
* jumpers X1-X5 are used for selection of function fulfilled by MAB-1101,
−
* jumper X6 enables to increasingpozwala na zwiększenie wzmocnienia (boost) dla mikrofonu lub wejścia IN,
+
* jumper X6 enables to increasing amplification (boost) of microphone or IN signal,
−
* zmianę położenia zworek należy dokonywać po wcześniejszym odłączeniu linii telefonicznej
+
* changes in jumper location should be done after disconnection of telephone line
 
{|{{Prettytable}}
 
{|{{Prettytable}}
 
|-
 
|-
Line 90: Line 90:
 
|}
 
|}
  
−
{{warning|Gdy urządzenie jest ustawione na funkcję OUT lub REC, zalecane jest ustawienie zworki X6 w pozycji NORMAL.}}
+
{{warning|If device is configure to fulfill OUT or REC function, it is recommended to set X6 jumper in NORMAL positiion.}}
  
−
= Przykładowe konfiguracja =
+
= Example configurations =
−
[[Grafika: MAB_funkcje_in.png]] [[Grafika: MAB_funkcje_mic.png]]<br />  
+
[[Image: MAB_funkcje_in.png]] [[Image: MAB_funkcje_mic.png]]<br />  
−
[[Grafika: MAB_funkcje_out.png]] [[Grafika: MAB_funkcje_rec.png]]
+
[[Image: MAB_funkcje_out.png]] [[Image: MAB_funkcje_rec.png]]

Latest revision as of 11:49, 14 January 2011

Multi Audio Box
MAB-1101
Installation and operation manual v1.02


MAB 1101 S.jpg



SLICAN Sp. z o.o.
www.slican.pl
e-mail: office@slican.pl


„Manufacturer reserves right to modify the product without prior notice.”

Connecting and preparing configuration

MAB-1101 is equipped in following input/output ports:

  • LINE socket type RJ11 for connecting PBX subscriber port,
  • PHONE socket type RJ11 for connecting analogue phone,
  • AUDIO in/out socket type mini Jack.
    • in IN mode there is possible to connect headphone of audio device ex. MP3 Player.
    • in OUT mode it is possible to connect input of audio card,
  • microphone inside MAB-1101 enables to listen premise.

Configuration settings

  • jumpers X1-X5 are used for selection of function fulfilled by MAB-1101,
  • jumper X6 enables to increasing amplification (boost) of microphone or IN signal,
  • changes in jumper location should be done after disconnection of telephone line
Jumper location
function no X1 X2 X3 X4 X5 X6
REC 3 • • •
2 •
1 • • • •
OUT 3 • • • • • •
2 •
1 •
IN
normal		 3 • • • • • •
2 •
1 •
IN
boost		 3 • • • • •
2 •
1 • •
MIC
normal		 3 • • • • •
2 •
1 • •
MIC
boost		 3 • • • •
2 •
1 • • •
Warning! If device is configure to fulfill OUT or REC function, it is recommended to set X6 jumper in NORMAL positiion.


Example configurations

MAB funkcje in.png MAB funkcje mic.png
MAB funkcje out.png MAB funkcje rec.png

Retrieved from "https://pubwiki.slican.com/index.php?title=MAB-1101_Instruction_manual&oldid=4125"