Latest revision as of 14:01, 5 September 2023

What firmware version is in my Slican ITS?

It is necessarily to connect to ITS using Internet browser. Next you should select panel: Update

Version 1.05.0170

• Fixes bugs

• Incorrect entries in Call History
• Incorrect presentation of CLIP in incoming calls to FXS equipment

Version 1.05.0150

• News

• Introduced possibility of logging in to neofon service in Orange (PL)

Version 1.05.0130

• News

• Added option to configure sending OPTIONS frame for VoIP trunk
• Changed way and frequency of downloading time from Keeper server
• Busy Signal Detection - Greece

• Fixes bugs

• No registration with SIP provider: T-Mobile (PL)
• Incoming traffic from SIP provider: IPcall (PL) does not work
• Errors when calling on internal calls when "automatic exit to external lines" is enabled

Version 1.05.0080

• News

• Added ability to configure range of RTP ports
• Support SIP provider: NETIA (PL)
• Support NTP real-time synchronization protocol

• Fixed bugs

• No incoming traffic for calls made by SIP provider: Freeconet (PL)
• No acoustics after returning from transferring an analog-voip call
• Delay in dialing digits after pressing flash

Version 1.04.0130

• News

• Possibility to define emergency output for subscriobers
• Outgoing method using digits "0" and "8"
• Protection against network attacks and SIP robots
• New menu which enables landuage and ITS location selection

• Corrected errors

• No green dot which confirms VoIP subscriber log-in
• Problems with acoustic after transfer call incoming via VoIP trunk
• Corrected maintenance of calls incoming from Freeconet provider (only Poland)
• Corrected maintenance of outgoing calls to Halonet and Dialog providers (only Poland)

Version 1.02.0010

• News

• possibility of time zone selection
• ringing time limitation for doorphone calls

• Fixed bugs:

• Wrong hour after time zone change.
• No possibility of transfer outgoing call by IP subscriber.
• Call limit for SIP account was increased to two, to enable call transfer executed on phone level (not on PBX level).
• Announced transfer for SIP account.
• No busy signal for calls incoming via any trunk and routed to busy VoIP subscriber.
• Improper calls routing for VoIP provider.
• While group upringing - after disconnect of busy phones, they didn't start ringing.

Version 1.01.1180

• Possibility of configuring up to 6 VoIP trunk in model ITS-0286.
• English language added. (Both GUI and announcements).
• Possibility of fixed assignment outgoing line to specified port.
• Calls history for established outgoing calls added - Pane Call log.
• PBX identifier added. Pane: Global options Field PABX Description
• Delay in DTMF sending for outgoing calls via FXO. Pane Lines (FXO) Field DTMF delay.

Version 1.01.1080

• Echo cancellation on FXO lines.
• Near-end crosstalk liquidation while operating with some DECT phones
• Outgoing calls routing via 0
• Access facilities: Login removal

Version 1.01.1010

• problem with disconnecting (from time to time) calls realized via analogue lines eliminated;
• possibility of establishing outgoing calls via different lines even if prefix is the same;
• PBX working modes launched;
• VoIP port status included in GUI;
• problems with call transit eliminated;
• once more upringing agents who were busy while start group upringing;
• call forwarding service to internal and external numbers;

How to use transferring call service

*72 phone number - unconditional call forwarding for all calls routed to this phone number
*73 - switch off call forwarding Call forwarding service is valid until PBX reset

First production version

• 1.01.0820 - version issued in day of PBX premiere - 26.10.2009

Back