Revision as of 08:04, 7 March 2011 (view source) Grzegorzg (Talk | contribs) (→‎Programming options) ← Older edit		Latest revision as of 09:40, 14 March 2013 (view source) Grzegorzg (Talk | contribs) m (→‎Call window)
(418 intermediate revisions by the same user not shown)
Line 1:		Line 1:
−	=SKD=	+	= Introduction =
−	<center>'''Doorphones'''</center>	+	In following manual we are proud to present you Slican '''''PhoneCTI''''' application, which includes all functionalities enable to integrate phone and computer used by PBX subscriber. Main advantage of this software is integration of phone books stored in PBX and subscriber computer. In '''''Slican PhoneCTI''''' application, phone books stored in PBX are used, changes in phone books can be entered in PBX (from phone of from '''''ConfigMAN''''' application) or in computer ('''''Slican PhoneCTI''''' application). Any modification is immediately visible for other users, with appropriate privileges defined in PBX. Phone book editing rules defined in PBX are also valid for editing in '''''Slican PhoneCTI'''''. Additionally '''''Slican PhoneCTI''''' application includes internal chat functionality (computer user can be any PBX subscriber). Sending messages to other person from phone book, who is not PBX subscribers, is possible via XMPP account (if such account was defined for this person) or as SMS. Sending SMSes is also possible according privileges defined in PBX. Internal chat functionality can be attractive for companies, which use Slican PBX and don't allow , from security reasons, to use common chat, as well for person who use one application and want to communicate with persons who uses different chat applications.
−	<center>'''SKD.RF'''</center>	+	= Minimal requirements =
−		+	To install SLICAN PhoneCTI application, following minimal requirements are necessarily:
−		+	* Computer should be powered with clock >800 MHz
−	<center>Installation and operational instruction</center>	+	* Computer RAM memory should be 1GB minimum
−		+	* Computer graphic card should be compatible with DirectX 9
−		+	* Operating system - WindowsXP SP2 or later
−	<center>[[File:IO_SKD_casing_has.jpg‎]]  [[File:IO SKD_view_both.png|230px]]<br>''' KD12N KD12P KN12N KN12P'''</center>	+	* Microsoft .NET Framework 4.0 or later should be installed on computer
−		+	* Web browser Internet Explorer 7 or later should be installed on computer
−		+	Installing application on computer which doesn't fulfill mentioned minimal requirements is possible but it will work slowly or not all functions will be active.
−	<center>Issue 1.03</center>	+	{{warning|SLICAN PhoneCTI can operate only with PBXes with installed firmware 6.01 or later.}}
−		+
−		+
−	<center>'''SLICAN Sp. z o.o.'''</center>	+
−		+
−	<center>[http://www.slican.pl/ www.slican.pl] </center>	+
−		+
−	<center>e-mail:''' '''[mailto:office@slican.pl office@slican.pl]</center>	+
−		+
−		+
−	<center>Manufacturer reserves right to make changes without prior notification.</center>	+
		+	= Installation =
		+	'''''Slican PhoneCTI''''' application is licensed and using it requires purchase of appropriate license code. Purchased license code is entered during PBX configuration and decides about number of workstations with  '''''Slican PhoneCTI''''' application. Application licensing has no influence on its installation. Application setup can be downloaded from  [http://www.slican.pl Slican webpage] and application install on the computer by entering appropriate data, necessarily to log in, in tap [[User:Grzegorzg#Settings - Connection|Settings - Connection]].
		+	{{warning|If extension number entered in tap [[User:Grzegorzg#Settings - Connection|Settings - Connection]] is not authorized to use PhoneCTI application, it is not possible to connect with PBX and data synchronizing.}}
		+	Second installation stage (not obliged) rely on uploading to PBX properly prepared file with PhoneCTI application update. It can be done by PBX admin. This activity, if done, enables automatic updating PhoneCTI application on workstations. Updating is described in chapter [[User:Grzegorzg#Application updating|Application updating]].
		+	== Application launch ==
		+	PhoneCTI application can be launched as any other Windows application. In application settings you can activate functionality of automatic launching application after operating system start. Diuring launching application it log into PBX (according settings defined in tap [[User:Grzegorzg#Settings - Connection | Settings - Connection]]). After successful login, application synchonizes application data with appropriate data in PBX.
−	<center>Data of last modification: 01.03.2011</center>	+	== Application updating ==
		+	Application updating id executed automatically and user has no influence on its proceedings. Similarly as for PBX, VoIP card or REC card firmware updating, updating of Slican PhoneCTI application updating is executed by PBX admin. Every time during PhoneCTI application launching version check (uploaded to PBX and installed on user PC) is carry out. If these version numbers are different, application stored in PBX is automatically downloaded and installed on user PC, next new installed application is launched and log into PBX. Depending on version number updating can be upgrading or downgrading.
−	= Features of Slican doorphones =	+	= Application structure =
−	'''SKD ''' series doorphones are equiped in numeric keyboard and display.	+	== Designation rules ==
−	There are manufactured as following models:	+	PhoneCTI application is very simple and intuitive, with help of appropriate icons status of phones visible in application windows. These icons invite user to execute specific action.
−	<center>	+	=== Icons and symbols ===
		+	For PBX extension numbers, symbol of phone status and linked phoneCTI application consits of two icons, first of them represents phone status, while second represents application status. In Table 1 you can see  icons represent phone status.
	{|{{prettytable}}		{|{{prettytable}}
−	!{{Hl1}}| Code	+	!{{Hl3}} colspan="2" | Phone status
−	!{{Hl1}}| Description	+
	|-		|-
−	|SKD.RF-KN12P||Underplaster, without apartment list	+	!{{Hl1}}|Icon !!{{Hl1}}| Icon meaning
	|-		|-
−	|SKD.RF-KN12N||Overplaster, without apartment list	+	|{{align|center}}|[[File:PhoneCTI_phone_free.png]]  ||This icon means free phone
	|-		|-
−	|SKD.RF-KD12P-graph||Underplaster, with apartment list	+	|{{align|center}}|[[File:PhoneCTI_call.png]]  ||This icon busy phone - call with extension number is established
	|-		|-
−	|SKD.RF-KD12N-graph.al||Overplaster, with apartment list and protection frame	+	|{{align|center}}|[[File:PhoneCTI_phone_sleep.png‎]]  ||This icon means, that any call was established with this extension number during last 8 hours (at least).
−	|}	+
−	</center>	+
−	'''SKD ''' doorphones can work with following Slican PBXes<ref name="ftn1"><sup>PBX must be equiped with DTMF module (CCA, PMS, NCT, CCT i MAC - standard, CMT - option).</sup></ref>:	+
−		+
−	* Slican CMT,	+
−	* Slican PMS-08,	+
−	* Slican CCA-2720,	+
−	* Slican NCT-1248,	+
−	* Slican CCT-1668,	+
−	* Slican MAC-6400.	+
−		+
−	Following table presents number of doorphones possible to connect, depending on PBX type (Table 1).	+
−		+
−	<center>	+
−	{|{{prettytable}}	+
−	!{{Hl1}}| PBX type	+
−	!{{Hl1}}| Maximal number of doorphones	+
	|-		|-
−	|Slican CMT	+	|{{align|center}}|[[File:PhoneCTI_phone_ringing.png‎]]  ||This icon means phone just ringing
−	|style="text-align:center"|2	+
	|-		|-
−	|Slican PMS-08	+	|{{align|center}}|[[File:PhoneCTI_phone_off.png]]  ||This icon means switched off phone or not logged account
−	|style="text-align:center"|2	+
	|-		|-
−	|Slican CCA-2720
−	|Half of maximal number of internal analogue lines
−	|-
−	|Slican NCT-1248
−	|Half of maximal number of internal analogue lines
−	|-
−	|Slican CCT-1668
−	|style="text-align:center"|20
−	|-
−	|Slican MAC-6400
−	|style="text-align:center"|20
−	|-
−	|Slican ITS-02XX; ITS-01XX
−	|style="text-align:center"|6
	|}		|}
−		+	'''''Table 1:''''' Icons represent phone status.<br>
−	''Table 1: Maximal number of doorphones depending on PBX type''</center>	+	In Table 2 you can see icon represents number, if number assigned to specified contact is external numer.
−		+
−		+
−	Doorphone connection method is the same for all PBX types, differences are visible only while PBX programming (to know how to programm PBX to working with doorphone, see PBX programming instruction).<br>	+
−	SKD doorphones are devices, which enable following activities:	+
−		+
−	* dialing PBX extension number to establish call, using touch keypad (phone like),	+
−	* extablish call after dialing doorphone number (listening),	+
−	* switching electro-lock (opening door) directly from phone while conversation, using PIN codes or using proximity identifiers (card or pendant),	+
−	* possibility of connecting additional button or movement detector for opening door,	+
−	* possibility of connecting opening door button,	+
−	* audio status signaling – pressing button, disconnection, etc.,	+
−	* call time duration – not longer than 3 minutes,	+
−	* power supply by save voltage 12VAC or 12VDC,	+
−	* proximity identifiers reader included in doorphone + possibility of connecting one additional (external) proximity reader Slican SKD.CKZ-10,	+
−	* maintenance up to 500 proximity identifiers (users),	+
−	* 2 working modes: local and global.	+
−		+
−	== Cassete dimensions ==	+
−	<center>'''Dimensions of doorphone cassete SKD.RF.KN12N and SKD.RF.KN12P'''<br>	+
−	[[Image:IO SKD Dimensions KN.png]]<br>	+
−	'''Dimensions of doorphone cassete SKD.RF.KD12N and SKD.RF.KD12P'''<br>	+
−	[[File:HAS Dimensions.png]][[File:HAS underplaster.png]]	+
−	</center>	+
−		+
−	= Installation =	+
−	Doorphones are available in several versions – see Table 2. They are connected to the PABX using two wires. Additionally button or movement detector can be connected to doorphone, they enable to opening door from inside.	+
−		+
−	<center>	+
	{|{{prettytable}}		{|{{prettytable}}
−	!{{Hl1}}| Symbol	+	!{{Hl3}} colspan="2" | Phone status
−	!{{Hl1}}| Mounting method	+
	|-		|-
−	|SKD.RF-KN12P	+	!{{Hl1}}|Icon !!{{Hl1}}| Icon meaning
−	|style="text-align:center"|underplaster	+
	|-		|-
−	|SKD.RF-KN12N	+	|{{align|center}}|[[File:PhoneCTI_Numer_zewnętrzny.PNG]]  ||This icon means external number
−	|style="text-align:center"|overplaster	+
	|-		|-
−	|SKD.RF-KD12N
−	|style="text-align:center"|overplaster
−	|-
−	|SKD.RF-KD12P
−	|style="text-align:center"|underplaster
	|}		|}
−		+	'''''Table 2:''''' Icon represents external number<br>This icon is always blue, because in opposite to extension numbers status of such phone there is not monitored.
−	''Table 2: Doorphone models''</center>	+
−		+
−		+
−	Doorphones require appropriate transformer<ref name="ftn2">Transformer 230V/12Vac, min 10VA with overcurrent protection of 2A. In our offer there are different transformers, which fulfils these conditions. </ref> or DC power supply<ref name="ftn3">Power supply 230Vac/12Vdc, min 10W with overcurrent protection of 2A</ref>, which is needed for supplying doorphone and electrolock. Electrolock should be acquired separately, depemding on needs – control voltage 12VAC or 12VDC (while doorphone supply with DC).	+
−		+
−	== Opening doorphone casing ==	+
−	<center>[[File:IO SKD casing elements v1.png]]	+
−	Fig. 2: Elements of SKD series doorphone	+
	{|{{prettytable}}		{|{{prettytable}}
−	!{{Hl1}}| Symbol	+	!{{Hl3}} colspan="2" | Application status
−	!{{Hl1}}| Element	+
	|-		|-
−	|style="text-align:center"|1	+	!{{Hl1}}|Icon !!{{Hl1}}| Icon meaning
−	|style="text-align:center"|Top panel fixing bolt	+
	|-		|-
−	|style="text-align:center"|2	+	|{{align|center}}|<None>  ||If there in no icon for specified extension number, application PhoneCTI was never logged to specified extension number
−	|style="text-align:center"|Loudspeaker cover	+
	|-		|-
−	|style="text-align:center"|3	+	|{{align|center}}|[[File:PhoneCTI_apps_ok.png]]  ||This icon means, that application is launched and logged to epecific extension number
−	|style="text-align:center"|Display and proximity<br>identifiers reader	+
	|-		|-
−	|style="text-align:center"|4	+	|{{align|center}}|[[File:PhoneCTI_apps_clock.png‎]]  ||This icon means, that application is in status "Be Right Back", application enter such mode after time of inactivity defined in [[User:Grzegorzg#Settings - General|settings]]
−	|style="text-align:center"|touch keypad	+
	|-		|-
−	|style="text-align:center"|5	+	|{{align|center}}|[[File:PhoneCTI_apps_dnd.PNG]]  ||This icon means, that application found out DND phone status (do not disturb)<ref name="apps_dnd">In appliction settings, DND phone status can be forced, if application and phone remain in standby mode for sufficiently long time. This time can be defined in [[User:Grzegorzg#Settings - Do not disturb (DND)|application settings]]</ref>
−	|style="text-align:center"|Microphone cover	+
	|-		|-
−	|style="text-align:center"|6
−	|style="text-align:center"|Mounting holes
−	|-
−	|style="text-align:center"|7
−	|style="text-align:center"|Hole for providing cables
	|}		|}
−	</center>	+	'''''Table 3:''''' Icons represent application status.<br> Finally symbol of phone and application linked with this phone is created by merging one icon from Table 1 with one icon from Table 2.<br>'''Example'''<br>For illustrate mentioned above rule three such symbols was presented in below table:<br>
−	Casing can be open by unscrew bolt located in front panel (see pos. 1 on Fig. 3). After unscrewing bolt following operations are possible:	+
−		+
−	# Front panel disassembly – Lift front panel about 30° from vertical and draw it up from the hinges – see pos. 2 on Fig. 3.	+
−	# Front panel lifting by 90° (perpendicular to the rest of casing) – this position is helpful during connecting wires to terminal (front panel is locked)– see pos. 3 on Fig. 3.	+
−		+
−		+
−	<center>[[Image:IO SKD casing-opening.png]]<br>''Fig. 3: Opening and inclination of front panel of KN casing''</center>	+
−	<center>[[File:IO SKD large casing opening.png]]<br>''Fig. 4 Opening and inclination of front panel of KD12 casing''</center>	+
−		+
−	== Doorphone installation ==	+
−	As standard, doorphone can be used for over- and under-plaster mounting. To mount doorphone, front panel should be removed (see chapter 2.1).	+
−		+
−		+
−	Over-plaster installation	+
−		+
−	Doorphone can be mounted on the outside of wall or column (Fig. 5). Housing for over-plaster mounting should be fixed by three stretcher pins fi 8. Wires should be entered by hole in the back side.	+
−		+
−	<center>[[Image:io skd Over-plaster mounting.png]]<br>''Fig. 5. Over-plaster SKD doorphone mounting''</center>	+
−		+
−		+
−	Under-plaster installation	+
−		+
−	Appropriate hole should be forge and brick up evenly to the wall face, as it is seen on Fig. 5. Wires should be conducted on the back side, under the plaster.	+
−		+
−	<center>[[Image:io skd under-plaster mounting.png]]<br>''Rys. nr 5: Montaż podtynkowy bramofonu SKD''</center>	+
−		+
−	== Doorphone connection ==	+
−	Doorphone power supply circuit should include easy to access disconnecting device, which is part of building installation, due to this device it is possible to perform service activities while power supply is on.	+
−		+
−	If power supply source is included in PBX, which dooz którą bramofon ma współpracować, to do bramofonu należy doprowadzić co najmniej3-parowy kabel<ref name="ftn4">If doorphone installation is located inside the building gelating cable should be used.</ref>:	+
−		+
−	* 2 wires (1 para) – connection with PBX analogue port, which works as doorphone port,	+
−	* 2 wires (1 para) – power supply,	+
−	* 1 wire – earthing.	+
−		+
−	Supply cable should not be longer then 20m and cross-section 0,5mm<sup>2 </sup>(standard phone cable), while for longer distances wire should be thicker. Voltage drop on wires while electro-lock is on (depends on type of used electro-lock) can causes improper device operation.	+
−		+
−	<center>[[Image:io skd connection of skd.png]]<br>''Fig. 6: Connection of SKD doorphone''</center>	+
−		+
−	== Description of terminals ==	+
−	<center>	+
	{|{{prettytable}}		{|{{prettytable}}
−	!{{Hl2}}|Terminal description !!{{Hl2}}|Terminal destination	+	!{{Hl3}}|Symbol !!{{Hl3}}| Symbol meaning
−	|-	+
−	|<b>12V AC</b>||Terminals for connecting external doorphone power supply source – voltage12VAC. To these terminals secondary winding of the transformer included in doorphone set.	+
−	|-	+
−	|'''+12V / GND'''||Terminals for connecting external doorphone power supply source – voltage12VDC. '''Polarity of connection wires should be observed.''' Device is protected against improper polarity connection, but doesn't operate.	+
−	|-	+
−	|colspan="2"|{{warning|Device can be powered only from one of mentioned above sources.}}	+
−	|-	+
−	|'''C / NO<ref name="ftn5">'''NO (''Normally Open''), NC (''Normally Closed''); maximal load capacity of NO and NC is equal to 24V, 2A'''</ref> (NC)'''|| Terminals for relay output used to controll electro-lock. They should be connected in series in electro-lock supply circuit. Due to using NO terminal (terminals stay closed for a programmed time) or NC (terminals stay open for a programmed time) it is possible to connect any device controlling opening door.	+
−	|-	+
−	| '''POD /GND'''|| To these terminals button or movement sensor can be connected, which are used to opening door from inside. Closing these terminals (pressing button) causes relay switching on, for a time of pressing button plus time defined during doorphone programming, this time starts running after releasing button. Such button (movement sensor) operate independently on doorphone status (call, standby mode).	+
−	|-	+
−	|'''COD / GND'''||These terminals can be used for connecting opening door sensor (reed relay). COD terminal is used to immediate switchng off electro-lock while door is open.	+
−	|-	+
−	|'''TIP / RING'''||These terminals can be used for connecting one of PABX analogue port, which is used as doorphone port. Wires polarity has no meaning.	+
−	|-	+
−	|'''A(D+)/B(D-)'''||Terminals to connect wires for data transmission between doorphones acordingh RS-485 standard.	+
	|-		|-
−	|'''UZ'''||Earting terminal – for earthing doorphone. Earting wire can be also connected to the bolt assigned as [[Image:io skd ground.png]].	+	|{{align|center}}|[[File:PhoneCTI_free_not_logged.PNG]] ||This symbol means, that phone is free, but to this extension number PhoneCTI application was never logged
	|-		|-
−	|'''+5V / GND'''||Terminals for connecting power supply to additional proximity card reader.	+	|{{align|center}}|[[File:PhoneCTI_busy_ok.PNG]]  ||This symbol means, that phone is busy, but PhoneCTI application is logged to this extension number
	|-		|-
−	|'''DIN, DOUT, CLK'''||Terminals for data transmission between doorphone and additional proximity card reader.	+	|{{align|center}}|[[File:PhoneCTI_free_dnd.PNG]]  ||This symbol means, that phone is free, but application found out DND phone status
	|-		|-
−	|'''LEDG, LEDR, BUZ'''||Terminals for connecting remain wires required for additional proximity card reader operation.
	|}		|}
−	</center>	+	'''''Table 4:''''' Examples of symbols used by application
		+	=== Symbols location and meaning ===
		+	Symbols presented in "''Table 4'' can be visible in two places. After log in appropriate symbol is visible in top part of '''PhoneCTI''' application window, as it is presented on following figure:
		+	<center>[[File:PhoneCTI Zalogowanie.PNG]]</center>
		+	Additionally on contact list in all instances of PhoneCTI this symbol is visible near comment defined for specific extension number:
		+	<center>[[File:PhoneCTI Lista kontaktów.PNG]]</center>
		+	Also following information should be noticed:
		+	* Below extension number comment defined in PBX, there is description defined individually by PhoneCTI user. Of course this description is optional and if itb isn't defined, in top part of window following text is visible: ''"Put your comment here..."'' - this text prompts you to enter individual description, on contact list individual description isn't displayed.
		+	* If specified contact includes extension number, this number is visible on the right side of comment.
		+	* If specified contact is included in public phone book and for this number option "Restrict" is switched on, only text "Restricted" appears on screen and read this number is impossible.
		+	* Icons located on right side of contact have following meaning:
		+	** [[File:PhoneCTI Koperta zielona.PNG]] - contact includes extension number with logged PhoneCTI application or logged XMPP account, so there is possible to send text message to computer assigned to this number, sent text message will be immediately displayed on computer screen.
		+	** [[File:PhoneCTI Koperta niebieska.PNG]] - contact includes extension number or XMPP account and both - PhoneCTI application nor XMPP account are not logged, there is possible to send text message to computer assigned to this number, sent text message will be displayed on computer screen immediately after log in PhoneCTI application or XMPP account.
		+	** [[File:PhoneCTI Koperta szara.PNG]] - contact contains number defined in public or private phone book (such contact is marked as [[File:PhoneCTI Numer zewnętrzny.PNG]] icon on its left side), not includes extension number nor XMPP account and PhoneCTI application never been logged to contact's extension number - if any, so there is possible to send only SMS message to this number
		+	** [[File:PhoneCTI Gwiazdka pusta.PNG]] - such icon means, that specified contact is not included in '''Favourites'''. Clicking this icon add it into '''Favourites'''.
		+	** [[File:PhoneCTI Gwiazdka pełna.PNG]] - such icon means, that specified contact is included in '''Favourites'''. Clicking this icon remove it from '''Favourites'''.
−	Remain configurational elements:	+	== Settings ==
		+	After selecting option ''Settings'' from '''Program''' menu, the Settings window appears on screen. There are some taps in this window, these taps can be used to set several application option. All taps are described in following chapters.
		+	=== Settings - Connection ===
		+	After selecting ''Connection'' tap, following window appears on the screen:
		+	<center>[[File:PhoneCTI Ustawienia Połączenie.PNG]]</center>
		+	Window visible above includes fields which are necessarily to entering data required to establish connection with PBX. Into the first of these field, you should enter extension number of phone, which will be assigned to PhoneCTI application. Second field should contain password defined for subscriber with extension number is defined in previous field (Password can contain from 4 to 16 characters, excluding ";" and "~" characters). Password should be entered by PBX admin in ConfigMAN application (sheet '''Subscribers/CTI Settings'''). During first log in PhoneCTI application, application will force change of this password. Such change can be executed also in any time by clicking link ''Change password'', which is located below the field with password. After clicking this link, following window will be visible on screen:<br>
		+	<center>[[File:PhoneCTI Zmiana hasła.PNG]]</center><br>
		+	In this window you should enter old password and new password two times. If all data are entered correctly, password will be changed and stored in PBX configuration. Due to this functionality admin doesn't know the passwords of subscribers. Entered password can be remember in application, by check box located of the right side of field including password. If this check box is empty, application will be enquire password every time while log in. Next field in this window is designed for entering IP addres of PBX. This address can be entered manually or automatically after pressing button "Find server" and selecting appropriate PBX from list of PBXes visible in network. After pressing  button "Establish connection", if all mentioned fields are correctly fulfiled, application will connect to the PBX and all data including phone book will be synchronized. After successful connection in bottom part of window, following text will be visible:
		+	<center>[[File:PhoneCTI Udane połączenie.PNG]]</center>
		+	If entered data are incorrect, another text will be visible in bottom part of window:
		+	<center>[[File:PhoneCTI Nieudane połączenie.PNG]]</center>
		+	Simultaneously link ''Change password'' changes to ''Forgot password'', after clicking this link special '''WebCTI''' window opens, in this window is possible to send message with password to specified e-mail address.
−	{|{{prettytable}}	+	=== Settings - General ===
−	!{{Hl2}}|Terminal description!!{{Hl2}} colspan="5"|Terminal destination	+	<center>[[File:PhoneCTI Ustawienia Ogólne.PNG]]</center>
−	|-	+	In this window there is possible to set several parameters, which decide about application operating. They defined application launching method, it's behaviour and method of presenting some data. In one field it is possible to set time when application enter in 'Be right back' status, this status is active if no one action is performed during specified time - icon representing application status changes to [[File:PhoneCTI_apps_clock.png|10px‎]]. In this window you can also determine, which action is performed by application as a result double clicking on on contact. Possible are actions selected from following list: <br><center>[[File:PhoneCTI Action DoubleClick.PNG]]</center><br>
−	|'''H_RE'''	+	'''Show call window''' - after selecting this option, double click causes displaying following window on computer screen<ref name="call_win">This window appear on computer screen after double clicking on subscriber '''1058 Instrukcja'''</ref><br> <center>[[File:PhoneCTI Okno połączenia.PNG]]</center>
−	|colspan="5"|Hard reset jumper – after hard reset all programed in doorphone proximity identyfiers are erased and doorphone default parameters are restored. To perform doorphone hard reset following activities should be done:	+	After clicking in - located in this window - button with green handset appropriate number will be dialed and connection established, call establishing process is different, depending phone type assigned to extension number, to which PhoneCTI application is logged. For system phone, PBX  simulate to hang up the handset, dial appropriate number, after answering this call acoustic channel is switched on and you can talk. For analog phone, PBX dial appropriate number and after answering ring back to the extension, to which PhoneCTI application is logged.<br>
		+	'''Make call''' - after selecting this option, double click on specified contact causes ring to this contact and establish call according rules described above.<br>
		+	'''Show message window''' - after selecting this option, double click causes displaying window described in chapter [[User:Grzegorzg#Message window|4.6.1 Message window]].
−	* switch off doorphone power supply,	+	=== Settings - WebCTI ===
−	* instal the jumper H_RE,	+	<center>[[File:PhoneCTI Ustawienia WebCTI.PNG]]</center>
−	* switch on power supply and after 5 sec. remove jumper .	+	In this window, you can define port number used for listening recorded calls in WebCTI application. This settings is used only for remote registering (from outside local network). Additionally in this window there is link ''Go to WebCTI'', after clicking this link, application WebCTI - stored in PBX - is launched.
−	|-	+
−	|'''M_Sel'''	+
−	|colspan="5"|This jumper can be used to two-level doorphone microphone volume adjustement. Too high doorphone microphone sensitivity can be observed as call interruption – this situation can be hear while playing melody, after pressing FLASH by subscriber connected with doorphone. Installing jumper decrease microphone sensitivity. As default this jumper should be removed.	+
−	|-	+
−	|'''Potencjometr P1'''	+
−	|colspan="5"|It is used for continous doorphone volume adjustement.	+
−	|-	+
−	|'''JP2'''	+
−	|colspan="5"|This jumper should been set in two doorphones working in global mode and located at the ends of RS-485 databus.	+
−	|-	+
−	|rowspan="19"|'''CONFIG - J18 terminal'''	+
−	|colspan="5"|Jumpers installed in this terminal define phisical number of doorphone cassette. It is neccessarily when doorphones cooperate via RS-485 bus (in such situation number of everty doorphone should be unique). Valu which is set can be checked by selecting option P11 in programing mode.	+
−	|-	+
−	|colspan="5"|<center>[[Image:io skd cofig jumper.png]]</center>	+
−	|-	+
−	!{{Hl2}}|8!!{{Hl2}}|4!!{{Hl2}}|2!!{{Hl2}}|1!!{{Hl2}}|Doorphone phisical number (ID)	+
−	|-	+
−	|<center>{{No}}</center>||<center>{{No}}</center>||<center>{{No}}</center>||<center>{{No}}</center>||<center>0</center>	+
−	|-	+
−	|<center>{{No}}</center>||<center>{{No}}</center>||<center>{{No}}</center>||<center>{{Ok}}</center>||<center>1</center>	+
−	|-	+
−	|<center>{{No}}</center>||<center>{{No}}</center>||<center>{{Ok}}</center>||<center>{{No}}</center>||<center>2</center>	+
−	|-	+
−	|<center>{{No}}</center>||<center>{{No}}</center>||<center>{{Ok}}</center>||<center>{{Ok}}</center>||<center>3</center>	+
−	|-	+
−	|<center>{{No}}</center>||<center>{{Ok}}</center>||<center>{{No}}</center>||<center>{{No}}</center>||<center>4</center>	+
−	|-	+
−	|<center>{{No}}</center>||<center>{{Ok}}</center>||<center>{{No}}</center>||<center>{{Ok}}</center>||<center>5</center>	+
−	|-	+
−	|<center>{{No}}</center>||<center>{{Ok}}</center>||<center>{{Ok}}</center>||<center>{{No}}</center>||<center>6</center>	+
−	|-	+
−	|<center>{{No}}</center>||<center>{{Ok}}</center>||<center>{{Ok}}</center>||<center>{{Ok}}</center>||<center>7</center>	+
−	|-	+
−	|<center>{{Ok}}</center>||<center>{{No}}</center>||<center>{{No}}</center>||<center>{{No}}</center>||<center>8</center>	+
−	|-	+
−	|<center>{{Ok}}</center>||<center>{{No}}</center>||<center>{{No}}</center>||<center>{{Ok}}</center>||<center>9</center>	+
−	|-	+
−	|<center>{{Ok}}</center>||<center>{{No}}</center>||<center>{{Ok}}</center>||<center>{{No}}</center>||<center>10</center>	+
−	|-	+
−	|<center>{{Ok}}</center>||<center>{{No}}</center>||<center>{{Ok}}</center>||<center>{{Ok}}</center>||<center>11</center>	+
−	|-	+
−	|<center>{{Ok}}</center>||<center>{{Ok}}</center>||<center>{{No}}</center>||<center>{{No}}</center>||<center>12</center>	+
−	|-	+
−	|<center>{{Ok}}</center>||<center>{{Ok}}</center>||<center>{{No}}</center>||<center>{{Ok}}</center>||<center>13</center>	+
−	|-	+
−	|<center>{{Ok}}</center>||<center>{{Ok}}</center>||<center>{{Ok}}</center>||<center>{{No}}</center>||<center>14</center>	+
−	|-	+
−	|<center>{{Ok}}</center>||<center>{{Ok}}</center>||<center>{{Ok}}</center>||<center>{{Ok}}</center>||<center>15</center>	+
−	|}	+
−	== Configuration of PBX for doorphone cooperation ==	+	=== Settings - Calls ===
−	To assure proper operation of SKD doorphone, PBX should be apropriatelly configured, analogue port with doorphone connected should be defined as doorphone.	+	<center>[[File:PhoneCTI Ustawienia Rozmowy.PNG]]</center>
		+	In this window you can define method of call signaling. After checking first option, while incoming call or lifting handset (for outgoing calls), on computer screen one of following windows appears (depending on call direction):
		+	<center>[[File:PhoneCTI Okno połączenia 2.PNG]]<br><br>[[File:PhoneCTI_Podniesiona_słuchawka_okno.JPG‎]]</center>
		+	If second  option is also checked, call window will close after specified time. Detailed description of call window is included in chapter [[User:Grzegorzg#Call window|3.5.4 Call window]]. It is possible also to switch on an automatic notifications about accessibility of subscriber, if previously calll to his/her number was unanswered or number was busy. Such notification appear on computer screen if subscriber with previously dialed number make any action with phone. In lower right corner of computer screen following window appears:
		+	<center>[[File:PhoneCTI Powiadomienie.PNG]]</center>
		+	Above window disappear after time defined in window 'Messages', but in tray there is an following icon:
		+	<center>[[File:PhoneCTI Koperta powiadomienia.PNG]]</center>
		+	It means notification from contact. After clicking this icon following window appears:
		+	<center>[[File:PhoneCTI Wiadomość wolny.PNG]]</center>
		+	This message prompt to dial previously unavailable extension number.
−	PABX programming method depends on PBX type – see manual attached to the PBX.	+	=== Settings - Messages ===
		+	<center>[[File:PhoneCTI Ustawienia SMS.PNG]]</center>
		+	After checking first field in this window, on computer with PhoneCTI application logged on extension number, following window will appear if any message will be send to this extension number: <br>
		+	<center>[[File:PhoneCTI Okno wiadomości.PNG]]</center>
		+	Above window disappear after time defined in window 'Messages', but in tray there is an following icon:
		+	<center>[[File:PhoneCTI Koperta powiadomienia.PNG]]</center>
		+	After clicking in this envelope, window with message text appears on computer screen.
		+	<center>[[File:PhoneCTI Wiadomość 1.PNG]]</center>
		+	In this window all messages sent to and from specfied extension number during current day. Messages from previous days are stored in archive.
		+	If this filed is not checked, window of message notification do not appears. Detailed description of this window is included in chapter [[User:Grzegorzg#Message window|4.6.1 Message window]]. In field "Message Validity" you can define time of storing SMS by mobile provider, if provider can't deliver it to recipient. During this time provider repeats SMS sending attempt. Last field defines if check of text entered into message will be executed. Language of dictionary used to checking is the same as application language.
−	== Installation of proximity card reader SKD.CKZ-10 ==	+	=== Settings - Do not disturb (DND) ===
		+	<center>[[File:PhoneCTI Ustawienia NiePrzeszkadzać.PNG]]</center>
		+	This screen is used to setting rules of switching on the DND service. Switchnig on this service is done after specified number of user idleness. Idleness status is when user doesn't use phone nor computer. It is also possible to set automatic switchnig on DND service after quiting application. Obwiously it is possible to switch on DND service in both situations. In the lower part of PhoneCTI main window there is small button, when you click this button DND service is switched on off (dependently on current ststus of this service) for extension number assigned to PhoneCTI application.
		+	=== Settings - Forwarding (FWD) ===
		+	<center>[[File:PhoneCTI Ustawienia Przekierowanie.PNG]]</center>
		+	In this window there are located all settings decide about forwarding conditions for specified extension number. These settings can be also set in ConfigMAN application or from phone using appropriate services. Swithing on forwarding can take place after defined time of idleness. Idleness status is when user doesn't use phone nor computer. It is also possible to switch on forwarding after quiting application. Obwiously it is possible to switch on forwarding in both situations. While automatic switching on forwarding, it is realized according settings done in this window. By default after clicking button FWD located in the lower part of PhoneCTI main window above window is displayed on computer screen. After checking last field, above window is not displayed but forwarding is switched on according stored settings.
−	SKD doorphone includes proximity idetifiers reader, althiugh it is possible to connect additional reader ''SKD.CKZ-10''. It is mounted to the wall using two fixing bolts 5 and appropriate screws (attached to the set). Mounting surface should be flat. Reader is resistant for moisture, so it can be mounted otside the building.	+	=== Settings - Audio settings ===
		+	<center>[[File:PhoneCTI Ustawienia Ustawienia Audio.PNG]]</center>
		+	In this window you can define method of audio signaling an incoming message.
		+	{{warning|In left, lower corner of all windows there is a button ''Set default''. This button restores default settings for specified window.}}
−	<center>[[Image:io skd reader skd ckz-10.png]]</center>	+	== Phone book ==
−	<center>''Fig. 7: Proximity card reader SKD.CKZ-10''</center>	+	Below figure presents phone book window, this window appear on computer screen after selecting option '''Book''' from menu '''''Contacts'''''.
		+	<center>[[File:PhoneCTI Książka telefoniczna.PNG]]</center>
		+	On the left side of above window you can see panel ''Groups'', in this panel there is a list of groups which include numbers located in phone book as well as structure of these groups. PhoneCTI application user can add, edit and remove groups, however if he/she has no defined in PBX privileges to edit public phone book, all his/her actions concern only private phone book. To create new group, you should select group of higher level, where new created group should be located and click button ''Add''. Following window will be visible on computer screen:
		+	<center>[[File:PhoneCTI_Nowa_Grupa.PNG]]</center>
		+	As a result of entering group number and its confirmation, new group will be added in appropriate place of left panel. After marking group and its selecting to edit, following window appears on screen:
		+	<center>[[File:PhoneCTI_Edycja_Grupy.PNG]]</center>
		+	In this window you can change name of created earlier group. Symilarly, after marking group and its selecting to remove following window appears on screen:
		+	<center>[[File:PhoneCTI_Usuń_Grupę.PNG]]</center>
		+	After confirmation, marked group will be removed. In the right panel, named ''Book'', all contacts are visible. Contacts visible in this panel depend on marking in left panel. Among contacts are PBX extension numbers, numbers from public phone book and numbers entered by subscriber to private phone book. All contacts or only contact belonging to specified group are visible. Clicking button ''Add'' causes presenting following window on computer screen:
		+	<center>[[File:PhoneCTI_Nowy_Kontakt.PNG]]</center>
		+	In this window, you can enter contact name, additionally for every contact it is possible to define many phone numbers (every phone number with appropriate comment). Wrong entered numbers can be removed. Additionally it is possible to contact to group - adding contact to group marked with icon [[File:PhoneCTI_Rączka.PNG]], this icon means affiliation specified group to public phone book. Such situation take place, when PhoneCTI user has no privileges to edit public phone book.
−	Reader is connected to the doorphone via 8-wires cable, this cable is integral part of reader. All wires are assigned by colours and these colours should be observed while connecting.	+	== Call history ==
		+	After selecting tap ''History'' - history of calls with extension number assigned to PhoneCTI application is visible in the application main window. After selecting tap ''History'', application main window presents as follows:
		+	<center>[[File:PhoneCTI Historia.PNG]]</center>
		+	Every position of call history means one call incoming to or outgoing from number assigned to PhoneCTI application. Visible are all calls concerning this number and stored in PBX. For every position you can see the caller number, his/her comment (for outgoing calls it is dialed number and comment for this number if it exists in PBX), date and time of call. Beside text information, in every position there are some icons, which describe this call. There are:
		+	<center>[[File:PhoneCTI Połączenie przychodzące.PNG]]</center>
		+	This arrow means incoming call, which was answered.
		+	<center>[[File:PhoneCTI Połączenie wychodzące.PNG]]</center>
		+	This arrow means outgoing call, never mind if call was established or not.
		+	<center>[[File:PhoneCTI Połączenie nieodebrane.PNG]]</center>
		+	This arrow means unanswered incoming call.
		+	<center>[[File:PhoneCTI Połączenie nieodebrane 2.PNG]]</center>
		+	This icon means several unanswered incoming callsfrom the same caller, before review the call history. Number visible in this icon means quantity of such calls.
		+	<center>[[File:PhoneCTI Połączenie odebrane inny.PNG]]</center>
		+	This icon means incoming call, answered by other subscriber. This icon can be used in two situations:
		+	* call was routed to group including specified extension number and was answered by another group agent
		+	* call was routed to specified subscriber but was picked up by another subscriber.
		+	<center>[[File:PhoneCTI SMS.PNG|15px]]</center>
		+	This icon means, that to specified numbe a SMS was sent, text of this SMS will be visible in window, which appears on screen after double clicking this position.
		+	<center>[[File:PhoneCTI Wiadomość.PNG|15px]]</center>
		+	This icon means, that a chat was established with computer assigned to extension number visible in specified position. Text of this chat will be visible in window, which appears on screen after double clicking this position.
		+	<center>[[File:PhoneCTI Nagranie.PNG]]</center>
		+	This icon means, that call was resorded.
−	{{Warning|Improper connection can cases improper operation, and sometimes even reader and/or doorphone damage.}}	+	== Dialing ==
−	<center>	+	=== Dialing number from contact list ===
−	{|{{Prettytable}}	+	=== Dialing number from call history ===
−	!{{Hl1}}|'''No.'''	+	=== Dialing number from application window ===
−	!{{Hl1}}|'''Reader wire colour'''	+	=== Call window ===
−	!{{Hl1}}|'''Doorphone terminal description'''	+	An example call window is presented in chapter [[User:Grzegorzg#Settings - Calls|4.2.4 Settings - Calls]]. Appeariance of this window changes depending on context of window presentation. First of all - title of this window changes. Following situations are possible:<br>
		+	{|
		+	|1
		+	|| <center>[[File:PhoneCTI Podniesiona słuchawka.PNG]]</center>
		+	||This title is visible when you lift the hanset to dial the number.
	|-		|-
−	|style="text-align:center"|1	+	|2
−	|style="text-align:center"|Red	+	|| <center>[[File:PhoneCTI Wywołanie.PNG]]</center>
−	|style="text-align:center"|+5V	+	||This title is visible when dialed number is ringing.
	|-		|-
−	|style="text-align:center"|2	+	|3
−	|style="text-align:center"|Blue	+	|| <center>[[File:PhoneCTI Połączony z.PNG]]</center>
−	|style="text-align:center"|GND	+	||Title visible after establishing call.
	|-		|-
−	|style="text-align:center"|3||style="text-align:center"|Brown||style="text-align:center"|BUZ	+	|4
		+	|| <center>[[File:PhoneCTI Połączenie przychodzące 2.PNG]]</center>
		+	||This title is visible when incoming call is ringing.
	|-		|-
−	|style="text-align:center"|4||style="text-align:center"|Green||style="text-align:center"|LEDG	+	||
		+	||After answering such call, title changes to visible in point 3.
		+	||
	|-		|-
−	|style="text-align:center"|5||style="text-align:center"|White||style="text-align:center"|DOUT	+	|5
		+	|| <center>[[File:PhoneCTI Zawieszony.PNG]]</center>
		+	||Title visible after pressing '''Hold''' during call.
	|-		|-
−	|style="text-align:center"|6||style="text-align:center"|Purple||style="text-align:center"|DIN	+	|6
		+	|| <center>[[File:PhoneCTI Zawieszony 2.PNG]]</center>
		+	||Title visible after answering forwarded call - it is possible to announcing call.
	|-		|-
−	|style="text-align:center"|7||style="text-align:center"|Yellow||style="text-align:center"|LEDR
−	|-
−	|style="text-align:center"|8||style="text-align:center"|Grey||style="text-align:center"|CLK
−
	|}		|}
−	''Table 3: Connecting reader SKD.CKZ-10 cable to doorphone terminals''	+	Three types of information is presented in central part of window:
−	</center>	+	* Comment assigned to caller or dialed phone number, as well as comment of number with established call<br>{{warning|If caller or established call number is a PBX extension number, it is commenmt stored in PBX configuration, however if it is number stored in private or public phone book, presented is name stored in this book, when it ix external number and PBX of second part of call sends the comment - it is text of this comment.}}
		+	* Number of this phone
		+	* Call duration time, before establishing call it is ringing time
−	Connecting cable is 5 meters long and due to assuring working parameters this cable can't be extend. So distance between doorphone and reader location should be observed. Range of proximity identifiers reader is up to 10cm and depends on type of used proximity identifier (card, pendant).	+	At the bottom of this window you can see the buttons, which enable to perform action changing the current behaviour of phone with extension number assigned to PhoneCTI application.
−		+	{|
−	== Doorphone programming ==	+	| Button which appears in the upper right corner of window depends on call type. For outgoing call it is button with red handset.
−	=== Doorphone working modes ===	+	|| <center>[[File:PhoneCTI Czerwona słuchawka.PNG]]</center>
−	Doorphone can operate in ''local'' or ''global'' mode. <i>In local mode</i> doorphone is not connected to any other doorphone (RS-485 bus terminals RS-485 bus terminals are not used) in opposite in global mode all doorphones are connected between themselves. Due to such connection parameters changes made on one doorphone are visible in remain doorphones, but only some settings are copy:	+
−		+
−	*Access code (code for opening door) – option P12,	+
−	*list of proximity identifiers - option P31.	+
−		+
−	<center>[[Image:io skd doorphone working modes.png]]</center>	+
−	<center>''Fig. 8: Doorphones working modes''</center>	+
−		+
−	Used in RS-485 differential transmission protect data against external disturbances (ex. inductive devices – motors), it is recommended to use <i>shielded twisted pair cat.5</i> (STP cat.5<ref name="ftn3">STP cat.5 - '''''S'''hielded '''T'''wisted '''P'''air '''cat'''egory '''5'''''</ref>) to assure additional protection. Maximal distance between extreme doorphones cannot be longer than ''1200 meters'' (in extreme doorphones it is recommended to instal JP2 jumper, it is equal to use terminators).	+
−		+
−	If in global mode on any doorphone in standby status dot on display flashes, it means that connection between this doorphone and MASTER cassette (in this cassette the most current database version is stored) was broken for one of following reasons:	+
−		+
−	* damage of RS-485 databus wire	+
−	* no MASTER cassette power supply	+
−		+
−	<center>[[Image:io skd databus.png]]</center>	+
−	<center>''Fig. 9 No connection with MASTER cassette signaling''</center>	+
−	In such situation programming procedure mustn't be executed from doorphone with no connection until failure will be fixed. After fixing this failure standby status dot stop flashing.	+
−		+
−	=== Entering programming mode ===	+
−		+
−		+
−	To enter programming mode:	+
−		+
−	# Press 3 time [[Image:io skd key.png]] button – on display|----| flashes.	+
−	# Select standard access code to the programming menu: '''1234''' (this access code is set as default – there is possibility of change this code). Time to entering this code is limited to 10 seconds, starting from first pressing [[Image:io skd key.png]] key. Return to the standby mode (| .| on display) takes place after this time (if access code isn't entered) or immedietelly (after entering wrong value of access code).	+
−	# |P--| is shown on display, it means that you entered programming mode<ref name="ftn4">Exiting programming mode proceed automatically after 3 minutes of inactivity.</ref>.	+
−		+
−	{{Warning|It is also possible to enter programming mode by short closing, for the time of 1 second, pins marked on figure below.}}	+
−		+
−		+
−	<center>[[Image:Io_skd_omitted_acces_code.png|250px]]''Fig. 10: Entering programming mode omitted access code''</center>	+
−		+
−	=== Programming options ===	+
−	{{Warning|Programming mode is marked on display by letter '''P''' and signs '''--'''.To immediate exit programming mode '''C''' key should be pressed..}}	+
−		+
−	Programming is base on sellection and setting value of specified doorphone options (P11 to P41). Detailed description of these options is presented in Table 4.	+
−		+
−	In programming process following keys are used:	+
−	<center>	+
−	{|{{prettytable}}	+
−	|style="text-align:center"|1 ||style="text-align:center"|2  ↑ ||style="text-align:center"|3	+
	|-		|-
−	|style="text-align:center"| ← 4  ||style="text-align:center"| 5 ||style="text-align:center"| 6  →	+	|After pressing this button, established call is disconnected (if it was established) and singnal of inaccssibility is send to phone. After pressing this key it becomes gray. Additionally in central part of call window, instead mentioned above information following inscription appears:
		+	|| <center>[[File:PhoneCTI Odłóż słuchawkę.PNG]]</center>
	|-		|-
−	|style="text-align:center"| 7 ||style="text-align:center"| ↓  8  ||style="text-align:center"| 9	+	| After hanging up the handset, call window disappear from computer screen.
	|-		|-
−	|[[Image:IioHAS_3000_Kluczyk.JPG]] ||style="text-align:center"| 0  ||style="text-align:center"| C	+	| For incoming call, button which appears in upper right corner presents green handset.
−	|}	+	|| <center>[[File:PhoneCTI Zielona słuchawka.PNG]]</center>
−	</center>	+
−		+
−	* '''2''' (up) and '''8 '''(down) – option selection,	+
−	* '''6''' – entering selected option,	+
−	* [[Image:io skd key.png]] (Enter) – entering parameter edition/accepting entered value or selected option,	+
−	* '''C''' (Cancel) – return to enter position without any changes.	+
−		+
−		+
−	{{Warning|If we enter and accept parameter value which is outside the allowable range, existing value displayed once more and edition can be repeated.}}	+
−		+
−	Example:	+
−		+
−	To change programming access code, following steps should be done:	+
−		+
−	# In entering mode select option '''P41'''<nowiki> [after displaying text |P--| on doorphone display, use keys </nowiki>'''↑↓''' or selecting [[Image:io skd key.png]] key (text |P--| starts flashing), next pressing ''41'' and accept with [[Image:io skd key.png]] key].	+
−	# Select option with '''→ key '''(digit ''6'') – current value, access code to programm menu is displayed (as default '''1234''').	+
−	# Press [[Image:io skd key.png]] key - text |----| starts flashing.	+
−	# Enter new access code and accept it by pressing [[Image:io skd key.png]].	+
−	# New value is displayed, it confirms entering this value.	+
−	# Exit this option by pressing '''C key '''(after single pressing causes exit changed option – display |P41|, double pressing - display |P--|).	+
−		+
−		+
−	{|{{prettytable}}	+
−	!{{Hl2}}|Option !!{{Hl2}}| Description	+
	|-		|-
−	!{{Hl3}} colspan="2" |General settings	+	|After establishing call, call window changes and on the left side, in the second row of buttons - there is button, which enables to hold this call. Call widow looks as follows:
		+	|| <center>[[File:PhoneCTI Zawieś.PNG]]</center>
	|-		|-
−	|'''P11'''||'''Cassette phisical number (ID).'''	+	|Then you should doubleclick on number to forwarding (in application main window or in phone book window). After it following button will be visible:
−		+	|| <center>[[File:PhoneCTI Transfer.PNG]]</center>
−	This field has information meaning and depends on jumper location on CONFIG terminal (allowed value are from ''0..15''). Every cassette number must be unique if there are few doorphones in the system.	+
	|-		|-
−	|'''P12'''||'''<nowiki>[4321]</nowiki><ref name="ftn6">'''<nowiki>In brackets [ ] default values are shown.</nowiki>'''</ref> = Access code (PIN) – '''is used to opening door electro-lock.	+	|After answering call you should announce the forwarded call and hang off the handset. To inform about it call window title changes to view presented in point 6 obove.
−		+	||
−	Value change:	+
−		+
−	<nowiki><Enter> |----| entering new PIN</nowiki>	+
−		+
−	This number is one for all system and its change on one cassette changes number in whole system. It should cosists of 4 digits. Setting value '''''0000''' ''<nowiki>lock possibility of entering usung access code [opening electro-lock can occurs only from PABX (by PABX subscriber) or using proximity identifiers reader].</nowiki>	+
	|-		|-
−	|'''P13'''|| '''<nowiki>[5] = Czas otwarcia elektrozamka w sekundach.</nowiki>'''	+	|On the extreme left side of window there is green button with handset and text ''Answer''. This button can changes depending on situation. By default this button can be seen for incoming call and enables to answer such call.
−		+	|| <center>[[File:PhoneCTI Zielona słuchawka.PNG]]</center>
−	Zmiana wartości:	+
−		+
−	<nowiki><Enter> |--| wprowadź nowy czas</nowiki>	+
−		+
−	Jest to czas, przez jaki będzie otwarty rygiel po zwolnieniu klawisza * przez abonenta centrali, po wprowadzeniu numeru PIN lub odczytaniu karty zbliżeniowej (breloka).	+
−		+
−	Zakres regulacji = ''1..30''	+
	|-		|-
−	|'''P14'''||'''<nowiki>[no]</nowiki><ref name="ftn9">'''no (''ang.'') - nie, yes (''ang.'') - tak '''</ref> = Gorąca linia po wybraniu cyfry "0".'''	+	|After establishing call, answering button changes in one visible beside. It enables to hold current call and establishing call with another number.
−		+	|| <center>[[File:PhoneCTI Hold.PNG]]</center>
−	Zmiana wartości:	+
−		+
−	<nowiki><Enter> <up> lub <down> - wciskanie klawisza w górę lub w dół powoduje zmianę na wartość przeciwną (</nowiki>''no'' --> ''YES'' lub ''YES'' --> ''no'')	+
−		+
−	Wciśnięcie przycisku '''0''' spowoduje tylko zamknięcie pętli – trzeba wtedy skierować ruch w centrali poprzez „gorącą linię”.	+
	|-		|-
−	!{{Hl3}} colspan="2" |'''Przekierowania <ref name="ftn10">'''Wykorzystywane, jeżeli bramofon jest podłączony do centrali.'''</ref>	+	|After holding current call, mentioned above button is disabled and above it button '''Transfer''' is enabled. You can unhold suspended call by pressing green handset icon - presented beside - visible in call window near suspended call.
		+	|| <center>[[File:PhoneCTI Odwieś.PNG]]</center>
	|-		|-
−	|'''P21'''|| '''<nowiki>[1] = Numer katalogowy przycisku 1.</nowiki>'''
−
−	Po naciśnięciu danego przycisku bramofon wybiera cyfry w systemie DTMF, zależne od tego ustawienia.
−	|-
−	|'''P22'''|| '''<nowiki>[2] = Numer katalogowy przycisku 2.</nowiki>'''
−	|-
−	|'''P23'''||'''<nowiki>[3] = Numer katalogowy przycisku 3.</nowiki>'''
−	|-
−	|'''P24'''||'''<nowiki>[4] = Numer katalogowy przycisku 4.</nowiki>'''
−	|-
−	|'''P25'''|| '''<nowiki>[5] = Numer katalogowy przycisku 5.</nowiki>'''
−	|-
−	|'''P26'''||'''<nowiki>[6] = Numer katalogowy przycisku 6.</nowiki>'''
−	|-
−	|'''P27'''|| '''<nowiki>[7] = Numer katalogowy przycisku 7.</nowiki>'''
−	|-
−	|'''P28'''|| '''<nowiki>[8] = Numer katalogowy przycisku 8.</nowiki>'''
−	|-
−	|'''P29'''||'''<nowiki>[9] = Numer katalogowy przycisku 9.</nowiki>'''
−	|-
−	!{{Hl3}} colspan="2" |<center>'''Identyfikatory zbliżeniowe'''</center>
−	|-
−	|'''P31'''
−	|'''Dodawanie identyfikatorów zbliżeniowych do systemu.'''
−
−	Maksymalna liczba identyfikatorów wynosi ''500''.
−
−	# Po wejściu w opcję na wyświetlaczu pojawi się |Add|<ref name="ftn11">add (''ang.'') - dodaj</ref>.
−	# Zatwierdzić przy użyciu [[Image:IioHAS_3000_Kluczyk.JPG]].
−	# Będzie migać liczba zarejestrowanych do tej pory identyfikatorów.
−	# Przyłożyć kartę (brelok) do dowolnego czytnika.
−	# Jeśli identyfikator (karta lub brelok) nie był wcześniej zarejestrowany, to jego przyjęcie do systemu jest potwierdzone na bramofonie pojedynczym sygnałem dźwiękowym i zwiększeniem o 1 migającej liczby zalogowanych identyfikatorów. W sytuacji gdy karta lub brelok figuruje już w bazie danych pojawią się 2 krótkie sygnały akustyczne, a liczba nie zostanie zwiększona.
−	# Powtarzać krok 4, aż do momentu dodania wszystkich identyfikatorów.
−	# Wyjść z opcji, naciskając klawisz '''C'''.
−
−	|-
−	|'''P32'''
−	|'''Usuwanie wszystkich identyfikatorów zbliżeniowych'''
−
−
−	# Po wejściu w opcję na wyświetlaczu pojawi się|dEL|<ref name="ftn12">dEL (od ''ang. ''delete) - usuń„</ref>.
−	# Zatwierdzić przy użyciu [[Image:IioHAS_3000_Kluczyk.JPG]].
−	# Pojawi się |YES|:
−
−	* zatwierdzenie spowoduje usunięcie wszystkich kart i brelokółw zbliżeniowych z systemu,
−	* wyjście z tej opcji (bez usuwania identyfikatorów) - nacisnąć klawisz '''C''' lub przy użyciu klawiszy '''↑''' '''↓'''  zmienić na |no| i wtedy zatwierdzić.
−
−
−	|-
−	!{{Hl3}} colspan="2"|'''Bezpieczeństwo'''
−	|-
−	|'''P41'''
−	|'''<nowiki>[1234] = Kod dostępu do menu programowania.</nowiki>'''
−
−	Zmiana wartości:
−
−	<nowiki><Enter> |----| wprowadź nowy kod</nowiki>
−
−	Kod ten jest wymagany, aby wejść w tryb programowania danego bramofonu. Musi się składać z 4 cyfr.
−
	|}		|}
−	<center>''Tabela nr 4: Opcje programowania bramofonów SKD''</center>
−
−	= Korzystanie z systemu kontroli dostępu =
−	== Korzystanie z bramofonu ==
−	Połączenie Bramofon → Abonent
−
−
−	Naciśnięcie dowolnego przycisku bramofonu jest sygnalizowane pojedynczym, krótkim dźwiękiem, a w przypadku wybierania cyfr są one dodatkowo prezentowane na wyświetlaczu. Z klawiatury bramofonu można wybrać numer katalogowy abonenta (lub grupy abonentów) albo jedną z cyfr z zakresu ''0..9 <ref name="ftn13">''Jeżeli analogowa linia wewnętrzna z centrali do bramofonu jest uszkodzona lub niepodłączona,to wybór dowolnego numeru spowoduje wygenerowanie trzech krótkich dźwięków.''</ref>, co przy prawidłowej konfiguracji bramofonu i centrali spowoduje, że u wybranego abonenta (bądź grupy abonentów) zadzwoni telefon. W czasie wywoływania na wyświetlaczu jest widoczny wybrany numer <ref name="ftn14">Jeśli wybraliśmy błędny numer, można powrócić do stanu spoczynkowego bramofonu, naciskając klawisz '''C'''.</ref>, a w głośniku słyszany jest sygnał (zależny od centrali, do której bramofon jest podłączony). Po podniesieniu słuchawki przez abonenta następuje rozmowa. Jeśli abonent po rozmowie odłoży słuchawkę,do bramofonu zostanie wysłany rozkaz powodujący jego rozłączenie się -w jego głośniku pojawi się pojedynczy sygnał akustyczny, a wyświetlacz wróci do stanu spoczynkowego (| .|). Czas trwania rozmowy jest ograniczony do 3 minut - po tym czasie bramofon rozłącza się, sygnalizując to trzema krótkimi dźwiękami i powrotem wyświetlacza do stanu spoczynkowego. U abonenta pojawi się sygnał zajętości lub nieosiągalności.
−
−	Gdy po wybraniu numeru abonent nie zgłosi się przez określony czas (zależny od centrali, z którą bramofon współpracuje), centrala zakończy wywoływanie. Także wciśnięcie przycisku [[File:Io_skd_c_key.png|30px]] w czasie wywoływania spowoduje jego zakończenie (w przypadku rozmowy nastąpi jej rozłączenie) i powrót do stanu spoczynkowego.
−
−
−	Połączenie Abonent → Bramofon
−
−
−	Jeżeli abonent centrali wybierze z telefonu numer bramofonu, zostanie zestawiona rozmowa z bramofonem. W czasie takiej rozmowy (podsłuchu) na wyświetlaczu jest napis „CALL”. Jeśli abonent po rozmowie odłoży słuchawkę, do bramofonu zostanie wysłany rozkaz powodujący jego rozłączenie się - w jego głośniku pojawi się pojedynczy sygnał akustyczny,a wyświetlacz wróci do stanu spoczynkowego (| .|). Czas trwania rozmowy jest ograniczony do 3 minut - po tym czasie bramofon rozłącza się, sygnalizując to trzema krótkimi dźwiękami i powrotem wyświetlacza do stanu spoczynkowego. U abonenta pojawi się sygnał zajętości lub nieosiągalności (ten sam sygnał pojawi się, jeśli połączenie zostanie zakończone od strony bramofonu - poprzez naciśnięcie klawisza '''C''').
−
−
−	Otwieranie drzwi (bramy)
−
−
−	<nowiki>Abonent może otworzyć rygiel elektrozamka w trakcie trwania rozmowy, wybierając z telefonu z wybieraniem DTMF znak „*” (w czasie gdy abonent naciska na ten klawisz słychać ton mu odpowiadający w głośniku bramofonu), po zwolnieniu przycisku powraca do dalszej rozmowy, a rygiel elektrozamka pozostaje jeszcze otwarty przez zaprogramowany czas. Można np. zaprogramować w pamięci telefonu numer: [„nr bramofonu” pauza *], który będzie powodował otwarcie bramy bez konieczności zestawiania rozmowy.</nowiki>
−
−	Dodatkowo istnieje możliwość zastosowania przycisku otwarcia drzwi (POD) lub czujki ruchu. W tym przypadku otwarcie jest sygnalizowane krótkim sygnałem dźwiękowym.
−
−	System kontroli dostępu pozwala także otwierać drzwi za pomocą zdefiniowanego kodu dostępu (patrz [#Opcja P12 w trybie programowania opcja P12 w trybie programowania]). Procedura jest następująca:
−
−	# W stanie spoczynku nacisnąć klawisz [[Image:IioHAS_3000_Kluczyk.JPG]] („kluczyk”).
−	# Na wyświetlaczu pojawi się '''<nowiki>----</nowiki>'''.
−	# Wprowadzić zaprogramowany kod dostępu – na wyświetlaczu pojawią się symbole zamiast cyfr, aby uniemożliwić ewentualne podejrzenie PIN-u.
−	# Jeśli kod jest poprawny, na wyświetlaczu zostanie wyświetlony napis '''OPEn''', sygnalizując otwarcie rygla. W przeciwnym przypadku bramofon wróci do stanu spoczynkowego - |----|.
−
−	== Korzystanie z czytników identyfikatorów zbliżeniowych ==
−	Otwarcie rygla elektrozamka przy pomocy wcześniej zapamiętanego identyfikatora zbliżeniowego w postaci karty lub breloka możliwe jest w następujących stanach bramofonu:
−
−	* każdy stan (spoczynkowy, rozmowy lub wołania) – z dodatkowego czytnika ''SKD.CKZ-10'',
−	* tylko w stanie spoczynkowym – z wbudowanego czytnika.
−
−	W tym celu należy zbliżyć kartę (brelok) do wyświetlacza (dookoła niego znajduje się antena wbudowanego czytnika) lub do zewnętrznego czytnika. Następuje wtedy weryfikacja unikalnego kodu zapisanego w identyfikatorze zbliżeniowym i jeśli jest on zgodny z zapisanym w pamięci, to następuje zwolnienie rygla elektrozamka (otwarcie drzwi), co jest sygnalizowane pojedynczym sygnałem dźwiękowym oraz pojawieniem się napisu OPEn na wyświetlaczu bramofonu. W sytuacji jeżeli weryfikacja zakończy się niepowodzeniem (brak identyfikatora w bazie danych), to bramofon sygnalizuje ten fakt dwoma krótkimi sygnałami akustycznymi i nie otwiera elektrozamka. Jeśli odczyt następuje przy użyciu SKD.CKZ-10, to wyżej opisane stany są także prezentowane za pomocą diody dwukolorowej oraz sygnałów dźwiękowych tego czytnika, co prezentuje poniższa tabela.
−
−	{|{{prettytable}}
−	!{{Hl2}}|Dioda Zielona!!{{Hl2}}|Dioda Czerwona!!{{Hl2}}|Brzęczyk ( Buzzer)!!{{Hl2}}|Stan pracy systemu
−	|-
−	|zgaszona||świeci||nieaktywny||drzwi zamknięte
−	|-
−	|świeci||zgaszona||nieaktywny||drzwi otwarte
−	|-
−	|świeci||zgaszona||1 x długi dźwięk(0,8 sekundy)||otwarcie drzwi przy użyciu autoryzowanej karty, kodu dostępu lub przycisku otwarcia od wewnątrz
−	|-
−	|zgaszona||podwójne mignięcie||2 x krótki dźwięk(0,2 s każdy)||karta niezarejestrowana w systemie – odmowa dostępu
−	|}
−
−	<center>''Tabela nr 5: Stany pracy sygnalizowane na zewnętrznym czytniku''</center>
−
−	= Wymogi bezpieczeństwa w użytkowaniu bramofonów serii SKD =
−	Dokładne przestrzeganie zasad bezpieczeństwa i prawidłowego użytkowania jest bezwzględnie wymagane dla zapewnienia prawidłowego działania urządzenia.
−
−	Poniżej przedstawione zasady są podstawą przy uwzględnianiu wszelkich reklamacji i uwag ze strony użytkowników przez producenta.
−
−	Przedstawione tu zasady dotyczą instalacji, umiejscowienia i wymagań,co do sieci elektrycznej i teleinformatycznej.
−
−	'''''Instalacja'''''
−
−	* Urządzenie powinno być zainstalowane i uruchomione przez autoryzowany serwis posiadający uprawnienia producenta.
−	* Wszystkie czynności instalacyjne powinny być wykonywane z zachowaniem zasad montażu i przepisów BHP.
−
−	'''''Środowisko pracy'''''
−
−	* Ze względu na trwałość i jakość pracy podzespołów elektronicznych urządzenie nie powinno być montowane w pomieszczeniach, w których utrzymuje się duża wilgotność powietrza. Obudowa bramofonu jest odporna na czynniki atmosferyczne, jednak w przypadku montażu na zewnątrz budynku zalecana jest instalacja w osłoniętym miejscu, tak aby uniknąć, np. strug deszczu bezpośrednio padających na urządzenie czy wiatru, który może utrudniać rozmowę przez bramofon.
−	* Ze względu na ryzyko zalania wodą nie powinno być umieszczane w pobliżu zbiorników z wodą lub źródeł jej strumieni (np. baseny, krany).
−	* Bramofon nie może być umieszczany w pomieszczeniach o silnym zapyleniu ani w pomieszczeniach o dużym natężeniu pola elektromagnetycznego.
−
−	Ze względu na możliwość nieprawidłowego funkcjonowania, zakłócenia lub odbarwienie obudowy nie zaleca się instalowania systemu w następujących miejscach:
−
−	* w miejscach o bezpośrednim działaniu promieni słonecznych;
−	* w miejscach, gdzie wibracje lub uderzenia są szczególnie częste lub silne;
−	* w pobliżu anten radiowych.
−
−	'''''Inne wymagania '''''
−
−	* Urządzenie powinno mieć prawidłowe uziemienie.
−	* Źródło zasilania bramofonu musi posiadać zabezpieczenie przeciwzwarciowe o wartości 2A.
−	* Wszystkie urządzenia dołączane do bramofonu powinny mieć świadectwa zgodności z normami obowiązującymi w Unii Europejskiej.
−
−	= Deklaracja zgodności, prawidłowe usuwanie produktu =
−
−	<table width=99% border="1" bordercolor=black rules=all style="margin:1em 1em 1em 0;border:solid 1px #AAAAAA; border-cellapse;empty-cells:show">
−	<tr>
−	<td colspan="3"><b><center><font size="5">DEKLARACJA ZGODNOŚCI</font></center></b></td> <td rowspan="2"><center>[[Image:deklaracja ce.png|100px]]</center></td>
−	</tr>
−	<tr>
−	<td width=25%> ''Producent:''<br>
−	'''SLICAN sp. z o.o.'''<br>
−	ul. M. Konopnickiej 18<br>
−	85-124 Bydgoszcz<br></td>
−	<td width=25%> ''Typ:''<br><br>
−	'''System kontroli dostępu'''</td>
−	<td width=25%> ''Model:''<br>
−	'''Bramofon SKD<br>Bramofon BRV'''
−	</td>
−	</tr>
−	<tr>
−	<td colspan="4"> ''Opis wyrobu:''<br>
−
−	System kontroli dostępu SKD i BRV to urządzenia przeznaczone do instalacji z centralami SLICAN, podłącza się jedo analogowego wyposażenia abonenckiego. Realizują one podstawowe funkcje bramofonu. Umożliwiają rozmowę z telefonu podłączonego do centrali SLICAN z urządzeniem zainstalowanym na bramie jak i otwarcie rygla elektrozamka.
−
−	</td>
−	</tr>
−	<tr>
−	<td colspan="4"> Wyrób jest zgodny z dyrektywą 99/5/WE '''R&TTE''' i spełnia wymagania następujących norm zharmonizowanych:
−	EN&nbsp;60950-1:2001&nbsp;+&nbsp;A11:2004; EN&nbsp;55022:1998&nbsp;+&nbsp;A1:2000&nbsp;+&nbsp;A2:2003; EN&nbsp;55024:1998&nbsp;+&nbsp;A1:2001&nbsp;+&nbsp;A2:2003;	+	== Sending messages ==
−	</td>	+	PhoneCTI application enables to send messages between subscribers (symilarly as common chat applications - ex. ''Skype''), it is also possible to send messages in form of SMS, to persons who use mobile phone. Sending message initialization takes place after right clicking over the any contact from list. Following context menu appears:
−	</tr>	+	<center>[[File:PhoneCTI Menu kontekstowe.PNG]]</center>
−	<tr>	+	From above menu you should select option ''Send Message'' or ''Send SMS'', depend on type of message to send. After selecting one of these option, on screen appears window, which is described in next chapter. This text tells about sending massage to another PhoneCTI application user. It is also possible to answer on received messages. It is also described in next chapter. Let's assume, tht another PhoneCTI user sent message to you.
−	<td colspan="4">  ''Informacje dodatkowe:''<br>	+	=== Message window ===
−	Urządzenie zostało przetestowane w typowej konfiguracji, z podłączeniem do central SLICAN. Spełnia wymagania dotyczące dopuszczalnych poziomów zaburzeń dla urządzeń klasy B.<br>	+	Receiving message is signal by following window appears in the bottom right corner of computer screen:
−	W przypadku niewłaściwej instalacji jest ono zakwalifikowane do urządzeń klasy A, kiedy to obowiązuje następujące ostrzeżenie:<br>	+	<center>[[File:PhoneCTI Okno wiadomości.PNG]]</center>
−	„Urządzenie jest produktem klasy A. W środowisku domowym może ono powodować zakłócenia fal radiowych, wymagające	+	This window appears only if appropriate option in settings is set ([[User:Grzegorzg#Settings - Messages|4.2.5 Settings - Messages]]) and disappears after time set also in this settings, however application icon will be visible in tray alternatively with following icon:
−	od użytkownika podjęcia odpowiednich środków zaradczych”.	+	<center>[[File:PhoneCTI Koperta powiadomienia.PNG]]</center>
−	</td>	+	After clicking this window, window with message will appear on computer screen:
−	</tr>	+	<center>[[File:PhoneCTI Wiadomość 1.PNG]]</center>
−	<tr>	+	In this window, besides message text there is also information about person who sent this message (together with individual comment of this person - if such comment exists) as well as time of sending message. In bottom part of this window it is possible to enter answer text, if we want to send any. In upper part of this window there is a button, which enables call to number of subscriber, from whom you received message. After clicking left part of this button you can establish call with number from which message was sent, while after clicking right part of button, on screen appears list of all numbers assigned to specified contact. From this list you can select number to establish call. Call establishing is performeed according rules described in chapter [[User:Grzegorzg#Settings - General|4.2.2 Settings - General]].
−	<td colspan="2"><center>Bydgoszcz 01-09-2008</center> </td>	+
−	<td colspan="2"><center>[[Image:Deklaracja_podpis_en.JPG|150px]]</center> </td>	+
−	</tr>	+
−	</table>	+
−	<center>[[Image:io skd proper equipement.png|600px]]</center>	+	=== Chat ===
		+	Due to PhoneCTI application you can lead the conversation with another application user, by answering his/her questions. Example of such conversation is visible on following figure:
		+	<center>[[File:PhoneCTI Chat.PNG]]</center>
		+	Messages in presented above form are stored tom the end of day. Next are stored in archive and they can be displayed on screen after selection of appropriate tap in ''Message window'' and defining date.
−	= Notatki =	+	=== SMS ===
		+	Sending message in SMS form is possible to persons, who don't have PBX extension number. Sending SMS is provided using GSM gateway installed in PBX. Subscriber who want to send SMSes must have  privileges to using TelefonCTI.plus. SMS message is send automaticaly by PBX and report about sending SMS is visible in ''Message window'':
		+	<center>[[File:PhoneCTI Wiadomość SMS.PNG]]</center>
		+	Sended SMS can be maximally 160 characters long. However if we use local characters (with ASCII codes above 127) this number decrease to 70. Number of characters, which remain is displayed on the right side of window. PhoneCTI application prevents entering more characters, than available. In ''Message window'' there is field, which should be checked for sending message as Flash SMS.
		+	== Finding data ==
		+	In PhoneCTI application, a sophisticated text searching method is implemented. Searching can be done in every application window, if following field is visible:
		+	<center>[[File:PhoneCTI wyszukiwanie.PNG]]</center>
		+	During entering characters PhoneCTI application executes automatic searching. It goes ahead according following rules:
		+	* if number of entered characters is equal to 1 or 2, application searches all strings, for which any word begins with entered text,
		+	* if number of entered characters is equal to 3 or more, application searches all strings, where all words contain entered text.
		+	If search concerns contacts and takes place on contact list, and entered text cannot be found, application informs about it, offers adding new contact and shows other contacts, which contains entered text and there are outside current search area. Described situation is shown on following window:
		+	<center>[[File:PhoneCTI Sugestie.PNG]]</center>
−	----	+	{{References}}
−	<references/>	+

---

Latest revision as of 09:40, 14 March 2013

Introduction

In following manual we are proud to present you Slican PhoneCTI application, which includes all functionalities enable to integrate phone and computer used by PBX subscriber. Main advantage of this software is integration of phone books stored in PBX and subscriber computer. In Slican PhoneCTI application, phone books stored in PBX are used, changes in phone books can be entered in PBX (from phone of from ConfigMAN application) or in computer (Slican PhoneCTI application). Any modification is immediately visible for other users, with appropriate privileges defined in PBX. Phone book editing rules defined in PBX are also valid for editing in Slican PhoneCTI. Additionally Slican PhoneCTI application includes internal chat functionality (computer user can be any PBX subscriber). Sending messages to other person from phone book, who is not PBX subscribers, is possible via XMPP account (if such account was defined for this person) or as SMS. Sending SMSes is also possible according privileges defined in PBX. Internal chat functionality can be attractive for companies, which use Slican PBX and don't allow , from security reasons, to use common chat, as well for person who use one application and want to communicate with persons who uses different chat applications.

Minimal requirements

To install SLICAN PhoneCTI application, following minimal requirements are necessarily:

• Computer should be powered with clock >800 MHz
• Computer RAM memory should be 1GB minimum
• Computer graphic card should be compatible with DirectX 9
• Operating system - WindowsXP SP2 or later
• Microsoft .NET Framework 4.0 or later should be installed on computer
• Web browser Internet Explorer 7 or later should be installed on computer

Installing application on computer which doesn't fulfill mentioned minimal requirements is possible but it will work slowly or not all functions will be active.

Warning! SLICAN PhoneCTI can operate only with PBXes with installed firmware 6.01 or later.

Installation

Slican PhoneCTI application is licensed and using it requires purchase of appropriate license code. Purchased license code is entered during PBX configuration and decides about number of workstations with Slican PhoneCTI application. Application licensing has no influence on its installation. Application setup can be downloaded from Slican webpage and application install on the computer by entering appropriate data, necessarily to log in, in tap Settings - Connection.

Warning! If extension number entered in tap Settings - Connection is not authorized to use PhoneCTI application, it is not possible to connect with PBX and data synchronizing.

Second installation stage (not obliged) rely on uploading to PBX properly prepared file with PhoneCTI application update. It can be done by PBX admin. This activity, if done, enables automatic updating PhoneCTI application on workstations. Updating is described in chapter Application updating.

Application launch

PhoneCTI application can be launched as any other Windows application. In application settings you can activate functionality of automatic launching application after operating system start. Diuring launching application it log into PBX (according settings defined in tap Settings - Connection). After successful login, application synchonizes application data with appropriate data in PBX.

Application updating

Application updating id executed automatically and user has no influence on its proceedings. Similarly as for PBX, VoIP card or REC card firmware updating, updating of Slican PhoneCTI application updating is executed by PBX admin. Every time during PhoneCTI application launching version check (uploaded to PBX and installed on user PC) is carry out. If these version numbers are different, application stored in PBX is automatically downloaded and installed on user PC, next new installed application is launched and log into PBX. Depending on version number updating can be upgrading or downgrading.

Application structure

Designation rules

PhoneCTI application is very simple and intuitive, with help of appropriate icons status of phones visible in application windows. These icons invite user to execute specific action.

Icons and symbols

For PBX extension numbers, symbol of phone status and linked phoneCTI application consits of two icons, first of them represents phone status, while second represents application status. In Table 1 you can see icons represent phone status.

Phone status
Icon	Icon meaning
	This icon means free phone
	This icon busy phone - call with extension number is established
	This icon means, that any call was established with this extension number during last 8 hours (at least).
	This icon means phone just ringing
	This icon means switched off phone or not logged account

Table 1: Icons represent phone status.
In Table 2 you can see icon represents number, if number assigned to specified contact is external numer.

Phone status
Icon	Icon meaning
	This icon means external number

Table 2: Icon represents external number
This icon is always blue, because in opposite to extension numbers status of such phone there is not monitored.

Application status
Icon	Icon meaning
<None>	If there in no icon for specified extension number, application PhoneCTI was never logged to specified extension number
	This icon means, that application is launched and logged to epecific extension number
	This icon means, that application is in status "Be Right Back", application enter such mode after time of inactivity defined in settings
	This icon means, that application found out DND phone status (do not disturb)[1]

Table 3: Icons represent application status.
Finally symbol of phone and application linked with this phone is created by merging one icon from Table 1 with one icon from Table 2.
Example
For illustrate mentioned above rule three such symbols was presented in below table:

Symbol	Symbol meaning
	This symbol means, that phone is free, but to this extension number PhoneCTI application was never logged
	This symbol means, that phone is busy, but PhoneCTI application is logged to this extension number
	This symbol means, that phone is free, but application found out DND phone status

Table 4: Examples of symbols used by application

Symbols location and meaning

Symbols presented in "Table 4 can be visible in two places. After log in appropriate symbol is visible in top part of PhoneCTI application window, as it is presented on following figure:

Additionally on contact list in all instances of PhoneCTI this symbol is visible near comment defined for specific extension number:

Also following information should be noticed:

• Below extension number comment defined in PBX, there is description defined individually by PhoneCTI user. Of course this description is optional and if itb isn't defined, in top part of window following text is visible: "Put your comment here..." - this text prompts you to enter individual description, on contact list individual description isn't displayed.
• If specified contact includes extension number, this number is visible on the right side of comment.
• If specified contact is included in public phone book and for this number option "Restrict" is switched on, only text "Restricted" appears on screen and read this number is impossible.
• Icons located on right side of contact have following meaning:
  • - contact includes extension number with logged PhoneCTI application or logged XMPP account, so there is possible to send text message to computer assigned to this number, sent text message will be immediately displayed on computer screen.
  • - contact includes extension number or XMPP account and both - PhoneCTI application nor XMPP account are not logged, there is possible to send text message to computer assigned to this number, sent text message will be displayed on computer screen immediately after log in PhoneCTI application or XMPP account.
  • - contact contains number defined in public or private phone book (such contact is marked as icon on its left side), not includes extension number nor XMPP account and PhoneCTI application never been logged to contact's extension number - if any, so there is possible to send only SMS message to this number
  • - such icon means, that specified contact is not included in Favourites. Clicking this icon add it into Favourites.
  • - such icon means, that specified contact is included in Favourites. Clicking this icon remove it from Favourites.

Settings

After selecting option Settings from Program menu, the Settings window appears on screen. There are some taps in this window, these taps can be used to set several application option. All taps are described in following chapters.

Settings - Connection

After selecting Connection tap, following window appears on the screen:

Window visible above includes fields which are necessarily to entering data required to establish connection with PBX. Into the first of these field, you should enter extension number of phone, which will be assigned to PhoneCTI application. Second field should contain password defined for subscriber with extension number is defined in previous field (Password can contain from 4 to 16 characters, excluding ";" and "~" characters). Password should be entered by PBX admin in ConfigMAN application (sheet Subscribers/CTI Settings). During first log in PhoneCTI application, application will force change of this password. Such change can be executed also in any time by clicking link Change password, which is located below the field with password. After clicking this link, following window will be visible on screen:

In this window you should enter old password and new password two times. If all data are entered correctly, password will be changed and stored in PBX configuration. Due to this functionality admin doesn't know the passwords of subscribers. Entered password can be remember in application, by check box located of the right side of field including password. If this check box is empty, application will be enquire password every time while log in. Next field in this window is designed for entering IP addres of PBX. This address can be entered manually or automatically after pressing button "Find server" and selecting appropriate PBX from list of PBXes visible in network. After pressing button "Establish connection", if all mentioned fields are correctly fulfiled, application will connect to the PBX and all data including phone book will be synchronized. After successful connection in bottom part of window, following text will be visible:

If entered data are incorrect, another text will be visible in bottom part of window:

Simultaneously link Change password changes to Forgot password, after clicking this link special WebCTI window opens, in this window is possible to send message with password to specified e-mail address.

Settings - General

In this window there is possible to set several parameters, which decide about application operating. They defined application launching method, it's behaviour and method of presenting some data. In one field it is possible to set time when application enter in 'Be right back' status, this status is active if no one action is performed during specified time - icon representing application status changes to . In this window you can also determine, which action is performed by application as a result double clicking on on contact. Possible are actions selected from following list:

Show call window - after selecting this option, double click causes displaying following window on computer screen^[2]

After clicking in - located in this window - button with green handset appropriate number will be dialed and connection established, call establishing process is different, depending phone type assigned to extension number, to which PhoneCTI application is logged. For system phone, PBX simulate to hang up the handset, dial appropriate number, after answering this call acoustic channel is switched on and you can talk. For analog phone, PBX dial appropriate number and after answering ring back to the extension, to which PhoneCTI application is logged.
Make call - after selecting this option, double click on specified contact causes ring to this contact and establish call according rules described above.
Show message window - after selecting this option, double click causes displaying window described in chapter 4.6.1 Message window.

Settings - WebCTI

In this window, you can define port number used for listening recorded calls in WebCTI application. This settings is used only for remote registering (from outside local network). Additionally in this window there is link Go to WebCTI, after clicking this link, application WebCTI - stored in PBX - is launched.

Settings - Calls

In this window you can define method of call signaling. After checking first option, while incoming call or lifting handset (for outgoing calls), on computer screen one of following windows appears (depending on call direction):

If second option is also checked, call window will close after specified time. Detailed description of call window is included in chapter 3.5.4 Call window. It is possible also to switch on an automatic notifications about accessibility of subscriber, if previously calll to his/her number was unanswered or number was busy. Such notification appear on computer screen if subscriber with previously dialed number make any action with phone. In lower right corner of computer screen following window appears:

Above window disappear after time defined in window 'Messages', but in tray there is an following icon:

It means notification from contact. After clicking this icon following window appears:

This message prompt to dial previously unavailable extension number.

Settings - Messages

After checking first field in this window, on computer with PhoneCTI application logged on extension number, following window will appear if any message will be send to this extension number:

Above window disappear after time defined in window 'Messages', but in tray there is an following icon:

After clicking in this envelope, window with message text appears on computer screen.

In this window all messages sent to and from specfied extension number during current day. Messages from previous days are stored in archive. If this filed is not checked, window of message notification do not appears. Detailed description of this window is included in chapter 4.6.1 Message window. In field "Message Validity" you can define time of storing SMS by mobile provider, if provider can't deliver it to recipient. During this time provider repeats SMS sending attempt. Last field defines if check of text entered into message will be executed. Language of dictionary used to checking is the same as application language.

Settings - Do not disturb (DND)

This screen is used to setting rules of switching on the DND service. Switchnig on this service is done after specified number of user idleness. Idleness status is when user doesn't use phone nor computer. It is also possible to set automatic switchnig on DND service after quiting application. Obwiously it is possible to switch on DND service in both situations. In the lower part of PhoneCTI main window there is small button, when you click this button DND service is switched on off (dependently on current ststus of this service) for extension number assigned to PhoneCTI application.

Settings - Forwarding (FWD)

In this window there are located all settings decide about forwarding conditions for specified extension number. These settings can be also set in ConfigMAN application or from phone using appropriate services. Swithing on forwarding can take place after defined time of idleness. Idleness status is when user doesn't use phone nor computer. It is also possible to switch on forwarding after quiting application. Obwiously it is possible to switch on forwarding in both situations. While automatic switching on forwarding, it is realized according settings done in this window. By default after clicking button FWD located in the lower part of PhoneCTI main window above window is displayed on computer screen. After checking last field, above window is not displayed but forwarding is switched on according stored settings.

Settings - Audio settings

In this window you can define method of audio signaling an incoming message.

Warning! In left, lower corner of all windows there is a button Set default. This button restores default settings for specified window.

Phone book

Below figure presents phone book window, this window appear on computer screen after selecting option Book from menu Contacts.

On the left side of above window you can see panel Groups, in this panel there is a list of groups which include numbers located in phone book as well as structure of these groups. PhoneCTI application user can add, edit and remove groups, however if he/she has no defined in PBX privileges to edit public phone book, all his/her actions concern only private phone book. To create new group, you should select group of higher level, where new created group should be located and click button Add. Following window will be visible on computer screen:

As a result of entering group number and its confirmation, new group will be added in appropriate place of left panel. After marking group and its selecting to edit, following window appears on screen:

In this window you can change name of created earlier group. Symilarly, after marking group and its selecting to remove following window appears on screen:

After confirmation, marked group will be removed. In the right panel, named Book, all contacts are visible. Contacts visible in this panel depend on marking in left panel. Among contacts are PBX extension numbers, numbers from public phone book and numbers entered by subscriber to private phone book. All contacts or only contact belonging to specified group are visible. Clicking button Add causes presenting following window on computer screen:

In this window, you can enter contact name, additionally for every contact it is possible to define many phone numbers (every phone number with appropriate comment). Wrong entered numbers can be removed. Additionally it is possible to contact to group - adding contact to group marked with icon , this icon means affiliation specified group to public phone book. Such situation take place, when PhoneCTI user has no privileges to edit public phone book.

Call history

After selecting tap History - history of calls with extension number assigned to PhoneCTI application is visible in the application main window. After selecting tap History, application main window presents as follows:

Every position of call history means one call incoming to or outgoing from number assigned to PhoneCTI application. Visible are all calls concerning this number and stored in PBX. For every position you can see the caller number, his/her comment (for outgoing calls it is dialed number and comment for this number if it exists in PBX), date and time of call. Beside text information, in every position there are some icons, which describe this call. There are:

This arrow means incoming call, which was answered.

This arrow means outgoing call, never mind if call was established or not.

This arrow means unanswered incoming call.

This icon means several unanswered incoming callsfrom the same caller, before review the call history. Number visible in this icon means quantity of such calls.

This icon means incoming call, answered by other subscriber. This icon can be used in two situations:

• call was routed to group including specified extension number and was answered by another group agent
• call was routed to specified subscriber but was picked up by another subscriber.

This icon means, that to specified numbe a SMS was sent, text of this SMS will be visible in window, which appears on screen after double clicking this position.

This icon means, that a chat was established with computer assigned to extension number visible in specified position. Text of this chat will be visible in window, which appears on screen after double clicking this position.

This icon means, that call was resorded.

Dialing

Dialing number from contact list

Dialing number from call history

Dialing number from application window

Call window

An example call window is presented in chapter 4.2.4 Settings - Calls. Appeariance of this window changes depending on context of window presentation. First of all - title of this window changes. Following situations are possible:

1		This title is visible when you lift the hanset to dial the number.
2		This title is visible when dialed number is ringing.
3		Title visible after establishing call.
4		This title is visible when incoming call is ringing.
	After answering such call, title changes to visible in point 3.
5		Title visible after pressing Hold during call.
6		Title visible after answering forwarded call - it is possible to announcing call.

Three types of information is presented in central part of window:

• Comment assigned to caller or dialed phone number, as well as comment of number with established call
  

Warning! If caller or established call number is a PBX extension number, it is commenmt stored in PBX configuration, however if it is number stored in private or public phone book, presented is name stored in this book, when it ix external number and PBX of second part of call sends the comment - it is text of this comment.

• Number of this phone
• Call duration time, before establishing call it is ringing time

At the bottom of this window you can see the buttons, which enable to perform action changing the current behaviour of phone with extension number assigned to PhoneCTI application.

Button which appears in the upper right corner of window depends on call type. For outgoing call it is button with red handset.
After pressing this button, established call is disconnected (if it was established) and singnal of inaccssibility is send to phone. After pressing this key it becomes gray. Additionally in central part of call window, instead mentioned above information following inscription appears:
After hanging up the handset, call window disappear from computer screen.
For incoming call, button which appears in upper right corner presents green handset.
After establishing call, call window changes and on the left side, in the second row of buttons - there is button, which enables to hold this call. Call widow looks as follows:
Then you should doubleclick on number to forwarding (in application main window or in phone book window). After it following button will be visible:
After answering call you should announce the forwarded call and hang off the handset. To inform about it call window title changes to view presented in point 6 obove.
On the extreme left side of window there is green button with handset and text Answer. This button can changes depending on situation. By default this button can be seen for incoming call and enables to answer such call.
After establishing call, answering button changes in one visible beside. It enables to hold current call and establishing call with another number.
After holding current call, mentioned above button is disabled and above it button Transfer is enabled. You can unhold suspended call by pressing green handset icon - presented beside - visible in call window near suspended call.

Sending messages

PhoneCTI application enables to send messages between subscribers (symilarly as common chat applications - ex. Skype), it is also possible to send messages in form of SMS, to persons who use mobile phone. Sending message initialization takes place after right clicking over the any contact from list. Following context menu appears:

From above menu you should select option Send Message or Send SMS, depend on type of message to send. After selecting one of these option, on screen appears window, which is described in next chapter. This text tells about sending massage to another PhoneCTI application user. It is also possible to answer on received messages. It is also described in next chapter. Let's assume, tht another PhoneCTI user sent message to you.

Message window

Receiving message is signal by following window appears in the bottom right corner of computer screen:

This window appears only if appropriate option in settings is set (4.2.5 Settings - Messages) and disappears after time set also in this settings, however application icon will be visible in tray alternatively with following icon:

After clicking this window, window with message will appear on computer screen:

In this window, besides message text there is also information about person who sent this message (together with individual comment of this person - if such comment exists) as well as time of sending message. In bottom part of this window it is possible to enter answer text, if we want to send any. In upper part of this window there is a button, which enables call to number of subscriber, from whom you received message. After clicking left part of this button you can establish call with number from which message was sent, while after clicking right part of button, on screen appears list of all numbers assigned to specified contact. From this list you can select number to establish call. Call establishing is performeed according rules described in chapter 4.2.2 Settings - General.

Chat

Due to PhoneCTI application you can lead the conversation with another application user, by answering his/her questions. Example of such conversation is visible on following figure:

Messages in presented above form are stored tom the end of day. Next are stored in archive and they can be displayed on screen after selection of appropriate tap in Message window and defining date.

SMS

Sending message in SMS form is possible to persons, who don't have PBX extension number. Sending SMS is provided using GSM gateway installed in PBX. Subscriber who want to send SMSes must have privileges to using TelefonCTI.plus. SMS message is send automaticaly by PBX and report about sending SMS is visible in Message window:

Sended SMS can be maximally 160 characters long. However if we use local characters (with ASCII codes above 127) this number decrease to 70. Number of characters, which remain is displayed on the right side of window. PhoneCTI application prevents entering more characters, than available. In Message window there is field, which should be checked for sending message as Flash SMS.

Finding data

In PhoneCTI application, a sophisticated text searching method is implemented. Searching can be done in every application window, if following field is visible:

During entering characters PhoneCTI application executes automatic searching. It goes ahead according following rules:

• if number of entered characters is equal to 1 or 2, application searches all strings, for which any word begins with entered text,
• if number of entered characters is equal to 3 or more, application searches all strings, where all words contain entered text.

If search concerns contacts and takes place on contact list, and entered text cannot be found, application informs about it, offers adding new contact and shows other contacts, which contains entered text and there are outside current search area. Described situation is shown on following window:

References