Difference between revisions of "DPH - Doorphone using"

From pubWiki-en
Jump to: navigation, search
 
(6 intermediate revisions by one other user not shown)
Line 1: Line 1:
 
<u>Connection Doorphone -> Subscriber</u>
 
<u>Connection Doorphone -> Subscriber</u>
  
−
Naciśnięcie przycisku [[Image:Słuchawka.PNG|30px]], o ile jest on aktywny (włączony), jest sygnalizowane pojedynczym, krótkim dźwiękiem. Bramofon wybiera numer abonenta centrali (grupy abonentów), u którego dzwoni telefon.Po podniesieniu słuchawki przez abonenta następuje rozmowa. Jeśli abonent po rozmowie odłoży słuchawkę, do bramofonu zostanie wysłany rozkaz powodujący jego rozłączenie się. Czas trwania rozmowy jest ograniczony do 3 minut, po tym czasie bramofon rozłącza się, sygnalizując to dwoma krótkimi dźwiękami. U abonenta pojawi się sygnał zajętości lub nieosiągalności.
+
Pressing button [[Image:Słuchawka.PNG|30px]], if this button is active (switched on), is signal with single, short beep. Doorphone dials PBX subscriber or group number.After answering this call by subscriber call is established. If after finishing call subscriber hang off the hanset, to doorphone command causing its disconnection is send. Call duration time is limited to 3 minutes, after this time doorphone disconnects automatically, only signaling this disconnection with two short beeps. Subscriber hears busy signal.
 +
 
 +
When after pressing button [[Image:Słuchawka.PNG|30px]], if subscriber doesn't answer during 3 minutes, PBX finishes calling. There is no possible to cancel call establishing.
  
−
When after pressing button [[Image:Słuchawka.PNG|30px]], if subscriber doesn't answer during 3 minutes, PBX finishes calling. If during calling, the same button is pressed once more, calling is finished (during established call, this call is disconnected) – doorphone return to standby mode.
 
  
 
<u>Connection Subscriber -> Doorphone</u>
 
<u>Connection Subscriber -> Doorphone</u>
  
−
Jeżeli abonent centrali wybierze z telefonu numer bramofonu, zostanie zestawiona rozmowa z bramofonem. Jeśli abonent po rozmowie odłoży słuchawkę, do bramofonu zostanie wysłany rozkaz powodujący jego rozłączenie się, a w jego głośniku pojawi się pojedynczy sygnał akustyczny. Czas trwania rozmowy jest ograniczony do 3 minut, po tym czasie bramofon rozłącza się, sygnalizując to dwoma krótkimi dźwiękami. U abonenta pojawi się sygnał zajętości lub nieosiągalności.
+
If subscriber dials doorphone number, a call between subscriber and doorphone will be established. If after call subscriber hang off the handset, doorphone disconnects and in doorphone loudspeaker a single beep will be hears. Call duration time is limited to 3 minutes, after this time doorphone disconnects automatically, only signaling this disconnection with two short beeps. Subscriber hears busy signal.
 +
 
 +
 
 +
<u>Doorphone disconnection</u>
 +
 
 +
Doorphone disconnects connection:
 +
* after receiving signal '''#''' from telephone line in DTMF - after hang up by subscriber PBX sends to doorphone (Slican IPx, MAC, CCT)
 +
* based on detection of busy signal (frequency 425Hz + -10%, clock cycle 500ms signal / 500ms silence + - 100ms, 3 full consecutive signals; Slican NCP and other manufacturers' exchanges)
 +
* automatically after exceeding 3 minutes of call
 +
 
  
 
<u>Opening gate</u>
 
<u>Opening gate</u>
  
−
Abonent może otworzyć rygiel elektrozamka w trakcie trwania rozmowy, wybierając z telefonu z wybieraniem DTMF znak „*” (w czasie gdy abonent naciska na ten klawisz słychać ton mu odpowiadający w głośniku bramofonu), po zwolnieniu przycisku powraca do dalszej rozmowy, a rygiel elektrozamka pozostaje jeszcze otwarty przez zaprogramowany czas. Można też zaprogramować w pamięci telefonu numer: [„nr bramofonu” pauza *], który będzie powodował otwarcie bramy bez konieczności zestawiania rozmowy.<BR>Dodatkowo istnieje możliwość zastosowania przycisku otwarcia drzwi (POD) lub czujki ruchu.
+
# Opening gate / wicket from phone - selecting:
 +
 
 +
* key '''*''' - action defined by administrator as "DTMF action" will be performed. Subscriber can open EZ bolt during conversation by selecting the '''"*"''' sign from  telephone keypad with DTMF dialing (when subscriber presses this key, he can hear tone corresponding to him in doorphone speaker), after releasing button he returns to the further conversation, and EZ bolt remains open for programmed time. CTS phone can be programmed with a button that will open the gate without having to talk [doorphone no. Pause *].
 +
* digit '''1''' - EZ relay will be activated
 +
* digit '''2''' - STA relay will be activated
 +
 
 +
# by door open button ('''POD''') or movement detector
 +
# in the RFID version by approach identifier

Latest revision as of 08:50, 3 June 2020

Connection Doorphone -> Subscriber

Pressing button Słuchawka.PNG, if this button is active (switched on), is signal with single, short beep. Doorphone dials PBX subscriber or group number.After answering this call by subscriber call is established. If after finishing call subscriber hang off the hanset, to doorphone command causing its disconnection is send. Call duration time is limited to 3 minutes, after this time doorphone disconnects automatically, only signaling this disconnection with two short beeps. Subscriber hears busy signal.

When after pressing button Słuchawka.PNG, if subscriber doesn't answer during 3 minutes, PBX finishes calling. There is no possible to cancel call establishing.


Connection Subscriber -> Doorphone

If subscriber dials doorphone number, a call between subscriber and doorphone will be established. If after call subscriber hang off the handset, doorphone disconnects and in doorphone loudspeaker a single beep will be hears. Call duration time is limited to 3 minutes, after this time doorphone disconnects automatically, only signaling this disconnection with two short beeps. Subscriber hears busy signal.


Doorphone disconnection

Doorphone disconnects connection:

  • after receiving signal # from telephone line in DTMF - after hang up by subscriber PBX sends to doorphone (Slican IPx, MAC, CCT)
  • based on detection of busy signal (frequency 425Hz + -10%, clock cycle 500ms signal / 500ms silence + - 100ms, 3 full consecutive signals; Slican NCP and other manufacturers' exchanges)
  • automatically after exceeding 3 minutes of call


Opening gate

  1. Opening gate / wicket from phone - selecting:
  • key * - action defined by administrator as "DTMF action" will be performed. Subscriber can open EZ bolt during conversation by selecting the "*" sign from telephone keypad with DTMF dialing (when subscriber presses this key, he can hear tone corresponding to him in doorphone speaker), after releasing button he returns to the further conversation, and EZ bolt remains open for programmed time. CTS phone can be programmed with a button that will open the gate without having to talk [doorphone no. Pause *].
  • digit 1 - EZ relay will be activated
  • digit 2 - STA relay will be activated
  1. by door open button (POD) or movement detector
  2. in the RFID version by approach identifier
Retrieved from "https://pubwiki.slican.com/index.php?title=DPH_-_Doorphone_using&oldid=7882"