Difference between revisions of "Characteristic of Slican DPH.IP doorphone"
From pubWiki-en
(→Maximum doorphone quantity, depending on PBX type) |
|||
| (13 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | Slican DPH.IP doorphone series connected to PBX | + | Slican DPH.IP doorphone series connected to PBX via Ethernet network allows people who intend to enter protected area to communicate with people in this area. Additionaly, it allows to release electric lock controlling door or gate opening using door opening button (POD), telephone with which conversation is conducted, by selecting appropriate DTMF code - *, digit 1 or 2 on acoustics, and appropriately CTS phone pre-programmed button. It is possible to install additional DPH.IP-KS28CAM camera module to DPH.IP, which allows, using the Slican MessengerCTI application, to view immediate surroundings and people using doorphone. |
| − | Additionally, DPH.IP | + | |
| − | Slican offers | + | Additionally, DPH.IP doorphones can be used as elements of ACS (Access Control System). This system allows use Slican PBX with DPH.IP doorphones to manage input/output control of users. ACS monitoring entry and exit people from building or protected area. It also makes it possible to limit entry of unauthorized persons to area under special protection. As part of configuration, system administrator can grants rights to users by defining access time intervals to given zone and access methods. All system events are logged and can be presented in form of detailed report. |
| − | + | ||
| + | In ACS system in DPH.IP-KS doorphones it is possible to release an electric lock controlling door or gate opening by means of: | ||
| + | * telephone during phone call, by selecting appropriate DTMF code - * or digits 1 or 2 | ||
| + | * by making a call from a mobile phone to a separate municipal number for a subscriber using the Mobilephone or MessengerCTI service | ||
| + | * CTS phone by means of DTMF or pre-programmed button | ||
| + | * MessengerCTI.dektop or MessengerCTI.mobile applications | ||
| + | * after selecting user account number and PIN (DPH.IP-KS16DRF) | ||
| + | * proximity identifier | ||
| + | * POD button (door opening button) | ||
| + | |||
| + | In DPH.IP-CR0RF reader it is possible to release electric lock which controls opening door or gate by means of: | ||
| + | * proximity identifier | ||
| + | * POD button (door opening button) | ||
| + | * system telephone with pre-programmed button | ||
| + | |||
| + | |||
| + | Slican offers five types or DPH.IP-KSxxRF.C devices: | ||
| + | |||
{|{{Prettytable}} | {|{{Prettytable}} | ||
|- | |- | ||
| Line 8: | Line 25: | ||
|- | |- | ||
| <center><b>DPH.IP-CR0RF</b></center> || | | <center><b>DPH.IP-CR0RF</b></center> || | ||
| − | * powered | + | * reader powered by TBRD.CR terminal board (external PoE injector) or directly from PoE |
* RFID card/pendant reader | * RFID card/pendant reader | ||
| − | * one | + | * support for one electrolock (EZ) (only via the TBRD.CR terminal board) |
| − | * | + | * support for sensor and door opening button (COD, POD) (only via the TBRD.CR terminal board) |
| − | + | ||
| − | + | ||
|- | |- | ||
| <center><b>DPH.IP-KS1RF.C</b></center> || | | <center><b>DPH.IP-KS1RF.C</b></center> || | ||
| − | * doorphone with one call | + | * doorphone with one call button |
* RFID card/pendant reader | * RFID card/pendant reader | ||
| + | * DPH.IP-KS28CAM camera module support | ||
* two relays (EZ, STA) | * two relays (EZ, STA) | ||
| − | * | + | * support for sensor and door opening button (COD, POD) |
| − | * | + | * tamper mechanism |
| + | * power supply from PoE or from an external power supply | ||
|- | |- | ||
| <center><b>DPH.IP-KS4DRF.C</b></center> || | | <center><b>DPH.IP-KS4DRF.C</b></center> || | ||
| − | * doorphone with four | + | * doorphone with four buttons (two navigational, confimation and rejection/ending call) |
| − | * LCD display | + | * LCD display showing operations performed |
* RFID card/pendant reader | * RFID card/pendant reader | ||
| + | * DPH.IP-KS28CAM camera module support | ||
* two relays (EZ, STA) | * two relays (EZ, STA) | ||
| − | * | + | * support for sensor and door opening button (COD, POD) |
| − | * | + | * tamper mechanism |
| + | * power supply from PoE or from an external power supply | ||
|- | |- | ||
| <center><b>DPH.IP-KS16DRF.C</b></center> || | | <center><b>DPH.IP-KS16DRF.C</b></center> || | ||
* doorphone with full alphanumeric keyboard | * doorphone with full alphanumeric keyboard | ||
| − | * LCD display | + | * LCD display showing operations performed and data entered from keyboard |
* RFID card/pendant reader | * RFID card/pendant reader | ||
| + | * DPH.IP-KS28CAM camera module support | ||
* two relays (EZ, STA) | * two relays (EZ, STA) | ||
| − | * | + | * support for sensor and door opening button (COD, POD) |
| − | * | + | * tamper mechanism |
| + | * power supply from PoE or from an external power supply | ||
| + | |- | ||
| + | | <center><b>[https://wiki.slican.pl/index.php/Doorphone_adapter_DPH.IP-UB2 DPH.IP-UB2.C]</b></center>|| | ||
|} | |} | ||
Following functions are available in DPH.IP doorphone (varies, depending on DPH model): | Following functions are available in DPH.IP doorphone (varies, depending on DPH model): | ||
| − | * establish phone call using | + | * establish phone call using capacitive buttons or numeric keypad (not applicable to DPH.IP-CR0RF reader) |
* two relays trigger: | * two relays trigger: | ||
| − | ** electrolock | + | ** electrolock EZ |
| − | ** additional relay ( | + | ** additional relay STA (does not apply to DPH.IP-CR0RF reader) |
| − | * power supply | + | * power supply from PoE Class 0 or 24 - 48V DC 15W (DPH.IP-CR0RF only from PoE) |
| − | + | * temperature range: -20 to +50<sup>o</sup> C (below 0<sup>o</sup>C response time of display may be extended to 10 seconds, DPH.IP-CR0RF should be protected against sunlight) | |
| − | + | * security level: DPH.IP-KSxx - IP32, DPH.IP-CR0 - IP54 | |
| − | + | * COD (door opening sensor) and POD (door opening button) inputs. Both may cooperate with electrolock | |
| − | + | * EZ or STA triggering (opening) by receiving "*" in DTMF code, depending on setting of appropriate parameter | |
| − | * | + | * EZ triggering by receiving "1" in DTMF code |
| − | * | + | * STA triggering (second output) by receiving "2" in DTMF code- a single pulse with fixed duration is generated |
| − | * EZ | + | * built-in RFID card reader (cards in Unique 125kHz standard, compatible with EM4102 system) |
| − | * built-in RFID card reader (Unique 125kHz standard, | + | * possibility of triggering EZ or STA by holding registered RFID card or entering subscriber's number and PIN code from numeric keypad |
| − | * possibility | + | * programming doorphone parameters from panel management application (IPx, MAC, CCT - ConfigMAN, NCP - ConfigWEB) |
| − | + | * possibility logging doorphones from outside user's LAN and via the Internet; initial configuration using SlicanDeviceConfig application | |
| − | * | + | |
| − | =Maximum | + | =Maximum devices used depending on PBX type= |
| − | + | ||
{|{{Prettytable}} | {|{{Prettytable}} | ||
|- | |- | ||
| − | !{{Hl1}}|<center><b>PBX TYPE</b></center> !!{{Hl1}}|<center><b>DPH.IP | + | !{{Hl1}}|<center><b>PBX TYPE</b></center> !!{{Hl1}}|<center><b>DPH.IP</b></center> |
|- | |- | ||
| − | | <center> | + | | <center>NCP-CM300P</center>||<center>100</center> |
|- | |- | ||
| − | | <center> | + | | <center>NCP-CM400P</center>||<center>200</center> |
|- | |- | ||
| − | | <center> | + | | <center>NCP-CM600P</center>||<center>200</center> |
|- | |- | ||
| − | | <center> | + | | <center>IPL-256</center>||<center>50</center> |
|- | |- | ||
| − | | <center> | + | | <center>IPM-032</center> ||<center>50</center> |
|- | |- | ||
| − | | <center> | + | | <center>IPM-032.LowCost</center> ||<center>10</center> |
|- | |- | ||
| − | | <center> | + | | <center>IPU-14.101/103/105</center> ||<center>28</center> |
|- | |- | ||
| − | | <center> | + | | <center>IPU-14.102/106</center> ||<center>50</center> |
|- | |- | ||
| − | | <center> | + | | <center>IPS-08.100/101</center> ||<center>16</center> |
|- | |- | ||
| − | | <center>CCT-1668</center> ||<center> | + | | <center>IPS-08.104/105<br>(LowCost)</center> ||<center>8</center> |
| + | |- | ||
| + | | <center>MAC-6400</center> ||<center>50</center> | ||
| + | |- | ||
| + | | <center>CCT-1668</center> ||<center>50</center> | ||
|} | |} | ||
| + | |||
| + | =Mounting= | ||
| + | All DPH and DPH.IP-KSxxRFC series doorphones are manufactured in various designs and depending on the implementation. They can be installed: | ||
| + | * as over-plaster | ||
| + | * as under-plaster | ||
| + | * on the fence | ||
Latest revision as of 11:38, 12 December 2022
Slican DPH.IP doorphone series connected to PBX via Ethernet network allows people who intend to enter protected area to communicate with people in this area. Additionaly, it allows to release electric lock controlling door or gate opening using door opening button (POD), telephone with which conversation is conducted, by selecting appropriate DTMF code - *, digit 1 or 2 on acoustics, and appropriately CTS phone pre-programmed button. It is possible to install additional DPH.IP-KS28CAM camera module to DPH.IP, which allows, using the Slican MessengerCTI application, to view immediate surroundings and people using doorphone.
Additionally, DPH.IP doorphones can be used as elements of ACS (Access Control System). This system allows use Slican PBX with DPH.IP doorphones to manage input/output control of users. ACS monitoring entry and exit people from building or protected area. It also makes it possible to limit entry of unauthorized persons to area under special protection. As part of configuration, system administrator can grants rights to users by defining access time intervals to given zone and access methods. All system events are logged and can be presented in form of detailed report.
In ACS system in DPH.IP-KS doorphones it is possible to release an electric lock controlling door or gate opening by means of:
- telephone during phone call, by selecting appropriate DTMF code - * or digits 1 or 2
- by making a call from a mobile phone to a separate municipal number for a subscriber using the Mobilephone or MessengerCTI service
- CTS phone by means of DTMF or pre-programmed button
- MessengerCTI.dektop or MessengerCTI.mobile applications
- after selecting user account number and PIN (DPH.IP-KS16DRF)
- proximity identifier
- POD button (door opening button)
In DPH.IP-CR0RF reader it is possible to release electric lock which controls opening door or gate by means of:
- proximity identifier
- POD button (door opening button)
- system telephone with pre-programmed button
Slican offers five types or DPH.IP-KSxxRF.C devices:
| |
|
| |
|
| |
|
| |
|
| |
Following functions are available in DPH.IP doorphone (varies, depending on DPH model):
- establish phone call using capacitive buttons or numeric keypad (not applicable to DPH.IP-CR0RF reader)
- two relays trigger:
- electrolock EZ
- additional relay STA (does not apply to DPH.IP-CR0RF reader)
- power supply from PoE Class 0 or 24 - 48V DC 15W (DPH.IP-CR0RF only from PoE)
- temperature range: -20 to +50o C (below 0oC response time of display may be extended to 10 seconds, DPH.IP-CR0RF should be protected against sunlight)
- security level: DPH.IP-KSxx - IP32, DPH.IP-CR0 - IP54
- COD (door opening sensor) and POD (door opening button) inputs. Both may cooperate with electrolock
- EZ or STA triggering (opening) by receiving "*" in DTMF code, depending on setting of appropriate parameter
- EZ triggering by receiving "1" in DTMF code
- STA triggering (second output) by receiving "2" in DTMF code- a single pulse with fixed duration is generated
- built-in RFID card reader (cards in Unique 125kHz standard, compatible with EM4102 system)
- possibility of triggering EZ or STA by holding registered RFID card or entering subscriber's number and PIN code from numeric keypad
- programming doorphone parameters from panel management application (IPx, MAC, CCT - ConfigMAN, NCP - ConfigWEB)
- possibility logging doorphones from outside user's LAN and via the Internet; initial configuration using SlicanDeviceConfig application
Maximum devices used depending on PBX type
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| (LowCost) |
|
| |
|
| |
Mounting
All DPH and DPH.IP-KSxxRFC series doorphones are manufactured in various designs and depending on the implementation. They can be installed:
- as over-plaster
- as under-plaster
- on the fence
