Difference between revisions of "MAB-1101 Instruction manual"

From pubWiki-en
Jump to: navigation, search
(→‎Configuration settings)
(→‎Configuration settings)
Line 33: Line 33:
 
* jumpers X1-X5 are used for selection of function fulfilled by MAB-1101,
 
* jumpers X1-X5 are used for selection of function fulfilled by MAB-1101,
 
* jumper X6 enables to increasing amplification (boost) of microphone or IN signal,
 
* jumper X6 enables to increasing amplification (boost) of microphone or IN signal,
−
* zmianę położenia zworek należy dokonywać po wcześniejszym odłączeniu linii telefonicznej
+
* changes in jumper location should be done after disconnection of telephone line
 
{|{{Prettytable}}
 
{|{{Prettytable}}
 
|-
 
|-

Revision as of 14:19, 26 November 2010

Multi Audio Box
MAB-1101
Installation and operation manual v1.02


MAB 1101 S.jpg



SLICAN Sp. z o.o.
www.slican.pl
e-mail: office@slican.pl


„Manufacturer reserves right to modify the product without prior notice.”

Connecting and preparing configuration

MAB-1101 is equipped in following input/output ports:

  • LINE socket type RJ11 for connecting PABX subscriber port,
  • PHONE socket type RJ11 for connecting analogue phone,
  • AUDIO in/out socket type mini Jack.
    • in IN mode there is possible to connect headphone of audio device ex. MP3 Player.
    • in OUT mode it is possible to connect input of audio card,
  • microphone inside MAB-1101 enables to listen premise.

Configuration settings

  • jumpers X1-X5 are used for selection of function fulfilled by MAB-1101,
  • jumper X6 enables to increasing amplification (boost) of microphone or IN signal,
  • changes in jumper location should be done after disconnection of telephone line
Jumper location
function no X1 X2 X3 X4 X5 X6
REC 3 • • •
2 •
1 • • • •
OUT 3 • • • • • •
2 •
1 •
IN
normal		 3 • • • • • •
2 •
1 •
IN
boost		 3 • • • • •
2 •
1 • •
MIC
normal		 3 • • • • •
2 •
1 • •
MIC
boost		 3 • • • •
2 •
1 • • •
Warning! Gdy urządzenie jest ustawione na funkcję OUT lub REC, zalecane jest ustawienie zworki X6 w pozycji NORMAL.


Przykładowe konfiguracja

Grafika: MAB_funkcje_in.png Grafika: MAB_funkcje_mic.png
Grafika: MAB_funkcje_out.png Grafika: MAB_funkcje_rec.png

Retrieved from "https://pubwiki.slican.com/index.php?title=MAB-1101_Instruction_manual&oldid=3388"