Difference between revisions of "MSB-1102 Instruction manual"
From pubWiki-en
(→MSB-1102 Structure) |
(→Configuration Jumpers) |
||
| Line 21: | Line 21: | ||
==Configuration Jumpers== | ==Configuration Jumpers== | ||
{| | {| | ||
| − | |[[ | + | |[[File:MSB Widok zworek small.png]]|| |
{|{{prettytable}} | {|{{prettytable}} | ||
| − | |X1-X3 - | + | |X1-X3 - Sensor 1 operating mode (SNS1)||X4-X6 - Sensor 2 operating mode (SNS2) |
|- | |- | ||
| − | |X10-X12 – | + | |X10-X12 – Relay 1 operating mode (REL1)||X7-X9 - Relay 2 operating mode (REL2) |
|- | |- | ||
|} | |} | ||
Revision as of 09:01, 10 January 2011
Contents
Information
Slican Multi Switch Box MSB-1102 it is device assuring cooperation between Slican PABX[1] and sensors, relays, alarm systems, paging systems etc.
Subscriber port in PABX should be configured as Sensor or Relay – depending on required function.
MSB-1102 Structure
MSB-1102 is equipped with following input/output ports:
- sockets AB1/AB2 type RJ11 for connecting 2 subscriber ports in PABX,
- socket 2REL[2] (REL1/REL2) type RJ45 which includes:
- sensor terminals (SNS1/SNS2) – configurable,
- monostable relay terminals[3] – configurable,
- socket ZAS – local power supply from external source.
Connecting and preparing for configuration
Configuration Jumpers
| File:MSB Widok zworek small.png |
|
Operating modes
| Zasilanie | Sensory (SNS) | Przekaźniki (REL) |
|---|---|---|
| Wariant bez zasilacza | Plik:MSB Tryb DCI.png |
Plik:MSB REL NO NC small.png |
| Wariant z zasilaczem | Plik:MSB tryb CCS.png | Plik:MSB VON VOFF small.png |
Zgodnie z powyższym MSB-1102 musi być zasilany z lokalnego zasilacza w trybach pracy:
- Sensory: Tryb CCS
- Przekaźniki: Tryb VON/VOFF
Parameters
- prąd pobierany z zasilacza w trybie CCS maks. 20mA.
- pobór prądu w trybie DCI maks. 10mA na sensor.
- parametry styków przekaźnika (dla trybów NO/NC i VON/VOFF) - max 42Vac/0.5A, 42Vdc/1A
- zakres napięcia uaktywniającego sensor w trybach DCI i CCS to 5-30V[4]dc.
|
Certificate of conformity, proper device disposal
References
- ↑ MSB-1102 can be used with firmware version 4.10 or later. It can be used with Slican PABXes: CXS-0424, CCT-1668, MAC-Zero, MAC-6400.
- ↑ Device uses 2 independent channels. It means that simultaneously two functions can operate. Ex: 2 sensors, 2 relays or mix.
- ↑ Release pulse time is about 1 second.
- ↑ Uwaga: Istotna jest polaryzacja
