Difference between revisions of "Callback"
(→CallBack function operating) |
(→CallBack function settings) |
||
| Line 15: | Line 15: | ||
= CallBack function settings= | = CallBack function settings= | ||
| − | All '''CallBack''' settings are defined inside | + | All '''CallBack''' settings are defined inside PBX and only admin can change it. Admin decides about: |
* Extension numbers for which this service is available. | * Extension numbers for which this service is available. | ||
| − | * External numbers (fixed or GSM) to which | + | * External numbers (fixed or GSM) to which PBX calls back after activation of '''CallBack''' service. |
* External numbers which should be dialed to activate '''CallBack''' service | * External numbers which should be dialed to activate '''CallBack''' service | ||
| − | * Via which trunk | + | * Via which trunk PBX dial to realize '''CallBack''' service |
=Limitation in '''CallBack''' service operation= | =Limitation in '''CallBack''' service operation= | ||
Revision as of 11:42, 14 January 2011
Contents
Advantages of using CallBack function
Bellow you can find some exemplary advantages of using CallBack function:
- Transit calls, so realizing official calls from phone located outside of PBX is limited to phones with number defined in PBX data base. There is no possibility to loose password or breaking system protections.
- As user is no charged for calls, private GSM numbers can be defined as MobilePhone numbers, so there is no necessary to increase number of company's GSM phones.
- Call is always established by PBX, so there is no presentation of caller. Person who answered call can only recognize that caller is somebody from inside company. Due to this functionality number of GSM phones (official and private) are always hiden.
CallBack function operating
CallBack is a PBX service which enables - using phone outside PBX - to order PBX establish a call to other user outside the PBX with charging extension number with entered in field MobilePhone number from which call is ordered. CalBack function aperates in following way:
- From phone defined in PBX as MobilePhone to number assigned by admin to this function.
- PBX refuses this call - it takes place after two ringings, unless caller hang up the phone.
- After short time (as standard delay is set to 5 seconds) PBX rings back to MobilePhone number. Caller presentation is the same as number assigned by admin to CallBack service.
- After answering call standard PBX dialing tone can be hear. During this signal target subscriber number can be dialed.
|
CallBack function settings
All CallBack settings are defined inside PBX and only admin can change it. Admin decides about:
- Extension numbers for which this service is available.
- External numbers (fixed or GSM) to which PBX calls back after activation of CallBack service.
- External numbers which should be dialed to activate CallBack service
- Via which trunk PBX dial to realize CallBack service
Limitation in CallBack service operation
|
|
While activation CallBack service using two analogue trunk service operation is limited (maximal call time is limited to 3 minutes). Depending on trunk quality, phone to which call back is routed and number dialed by caller quality of call can be poor or even call can't be established - this can't be base of complaint or claim.
So for proper operation of CallBack service it is recommended to realize CallBack service using at least one of following trunk:
- ISDN,
- GSM realized by card installed in PABX,
- good quality VoIP trunk.
