Revision as of 21:39, 8 August 2010

System phones

Slican CTS-202 Slican CTS-202.Plus Slican CTS-202.IP and console CTS-232

Installation and manual

Issue 1.10

SLICAN Sp. z o.o. www.slican.pl e-mail: office@slican.pl

Manufacturer reserves right to make changes without prior notification.

Date of last modification:

1 Introduction
2 Features
3 Equipement
4 Structure
5 Connecting CTS phones to PABX
6 Phone settings
7 Phone maintenance
8 Receiving and finishing call
9 Dialing number from phone keypad
- 9.1 "Hot" number dialing
- 9.2 "Cold" number dialing
10 Dialing numbers from lists
11 Using speed access keys
12 Phone book
13 Services
14 DECT in phone CTS-202.Plus
15 Phone special functions
- 15.1 Pause in daled number
16 Information about line busyness and PABX failures
17 Security requirements for CTS system phones
18 Certificate of conformity, proper device disposal

Introduction

New system phones Slican CTS-202, CTS-202.Plus and CTS-202.IP were designed for PABXes. These phones can work with console CTS-232. Phones CTS-202 and CTS-202.Plus are digital system phones connected to U_po port, while CTS-202.IP is VoIP system phones.

Setlement of basic differences in system phones features is presented in following table.

	System phone feature	CTS-202.CL	CTS-202.Plus	CTS-202.IP
1.	Backlighted display	YES	YES	YES
2.	Recording output AUDIO OUT	NO	YES	YES
3.	Included DECT base	NO	YES	NO
4.	External power supply	OPTION	STANDARD	STANDARD
5.	Hands free mode	YES	YES	AVAILABLE ONLY WHILE LISTENING
6.	Cooperation with console CTS-232	YES	YES	YES
7.	Cooperation with CTI application	YES	YES	YES (phone must be installed in the same local area network as PABX)

Phone in model CTS-202.CL is available in two colours. Model CTS-202.CL-GR is performed as grey, while CTS-202.CL-BK is performed as black. Consoles are available to the phone – console CTS-232-GR in gray and CTS-232-BK in black.

Offered models assured convenient work in secretary and managerial office. There are also adequate for front desk office. Clear menu enables intuitive phone parameters changing and fit it to individual user needs. Full integration phone and PABX firmware enables for quick change of phone settings from ConfigMAN application.

Multifunctional programable keys assure easy access to PABX features, extension numbers and entries in phone books. User can use three phone books:

public phone book – available for all subscribers in PABX, managed globally,
private phone book – available only for phone user,
extension number list – list of PABX extension numbers.

Number of system phones, which can be connected to the PABX depends on its type.For MAC-6400 PABX up to 120 system phones Slican CTS-202.CL or CTS-202.Plus and up to 18 system phones CTS-202.IP can be connected. For CCT-1668 PABX, user can connects up to 18 system phones Slican CTS-202.CL or CTS-202.Plus and up to 18 system phones CTS-202.IP. Maximally to four system phones up to 5 consoles can be connected, to remain system phones up to 2 consoles CTS-232 can be connected. This feature enables to increase number of speed acces keys. It also increase possibilities of incoming and oytgoing calls organize together with view of specified subscribers status (free, busy).

Features

12 programmable keys ex. extension number status, speed access, PABX services, indexes of entries from phone books.

To every speed access key any PABX service can be assigned.

Menu maintenace keys: arrows up/down, two context keys.

Volume keys +/-.

Keys: Flash, SPK ON, SPK OFF, Mute, Redial.

Two phone books: public and private as well as extension numbers list.

Call register - 10 numbers: dialed, received, missed.

Call number presentation together with name from phone book or PABX database.

Waiting number presentation.

Dialed number presentation.

Call time presentation during call.

Programable settings: polish, english or russian language, ringing volume , loudspeaker and hanset as well as LCD display contrast.

5 ringing types.

Possibility of programing phone settings from PABX configuration application.

Auto Redial function – automatic attempt of redialing busy or not answered number.

Digital data transmision via 1 pair of wires from U terminal up to 1 km.

Possibility of phone extention with additional CTS-232 consoles (extention of programable keys from 42 to 162 see Chapter 1).

Multirows LCD display with two font faces.

After phone change assigned to it data doesn't loss.

cooperation with headphones.

ATTENTION!

Phone functionality is strictly related with version of PABX firmware. Operating description and available functions, described in following manual concertns current version of PABX firmware. If some functions are missing or working different, please contact with authorized service.

Equipement

Accesories	CTS-202 phone (pieces in set)	CTS-202.Plus phone (pieces in set)	CTS-202.IP phone (pieces in set)	CTS-232 console (pieces in set)
Phone	1 pcs.	1 pcs.	1 pcs.	-
Handset	1 pcs.	1 pcs.	1 pcs.	-
Handset cord	1 pcs.	1 pcs.	1 pcs.	-
Phone cable	1 pcs.	1 pcs.	-	-
Phone power supply	Additional option	1 pcs.	1 pcs.	-
Console	-	-	-	1 pcs.
Connecting cable console-console	-	-	-	1 pcs.
Joining element console-phone or console-console	-	-	-	1 pcs.
Fixing screw	-	-	-	4 pcs.

Structure

Phone

1. Display	7. Auto Answer/Mute key
2. Cradle switch	8. Volume control keys
3. Menu navigation keys	9. Programable keys with light signaling
4. Ringing LED	10. Flash key
5. Loudspeaker	11. Redial key
6. Keypad	12. Hands Free mode on and off keys (speakerphone)

13. CTS-232console connecting socket	16. Headphones connection socket
14. POWER socket (for CTS-202 and CTS-202.Plus), socket 36V/0,1A (for CTS-202.IP	17. AUDIO OUT outlet (CTS-202.Plus and CTS-202.IP)
15. LINE socket	18. Socket for aditional headphones with microphone

Display

SYSTEM TELEPHONE
CTS-202
SLICAN 2010
Terminal: 1.29

Hello screen after switching on PABX and phone (CTS-202.CL and CTS-202.Plus).

SYSTEM TELEPHONE 
CTS-202.IP
SLICAN 2007
Terminal 0.70

Hello screen after switching on PABX and phone (CTS-202.IP).

 No connection  
with PABX

No PABX connection with VoIP server – it appear after 30 seconds from PABX switching on, if conection between phone and PABX is not established (CTS-202.CL and CTS-202.Plus). After next 5 seconds phone reset and connection attempt will be performed.

Service is
temporaily
  unavailable   
Please wait

This message is displayed while during regular work connection between phone and PABX is interrupted. (CTS-202.CL and CTS-202.Plus)

Slican VoIP
No PABX
connection
Check LAN
cable
Menu      Connect

No connection cable error mesage (CTS-202.IP).

Slican VoIP
No PABX
connetion
No answer from
VoIP Server
Menu      Connect

No PABX connection with VoIP server error message (CTS-202.IP).

Monday
15.05.10     14:41

Telephone name

Menu      Connect

Display in standby mode (all models).

Talking to
SUBSCRIBER NAME
           1034
1:23
Menu      Save

Display during call (all models).

Subscriber name – internal subscriber name or entry in phone book;

1034 – number, external presented number or extension number;

1:23 – connection time;

Save – current key function.

Training ACD: 10:12
Calls:         2/10
Wait time:        0
Exp. time:        1
Missed %:       0/0
Agents:        1/12
Menu           Book

Preview of ACD group status:

Comment for group – max. 10 signs

Calls – number of calls waiting in queue / number of calls maintained by agents

Wait. time – real waiting time for longest waiting call

Exp. time – estimated waiting time, calculated according average call time, number of current waiting calls and number of agents in group / declared waiting time, defining queue excess

Missed % - evaluated in percent number of calls missed due to caller surrender / evaluated in percent number of calls refused due to queue excess, calculation based on last 15 minutes

Agentów – number of available agents / total number of agents

Console

1. Programmable keys

2. Outlet for second console

3. Socket for connecting phone

Connecting CTS phones to PABX

Phisical connecting CTS-202 phones to PABX

Proper operating of phones CTS-202 and CTS-202.Plus depends on distance between PABX and phone, number of connected consoles and quality of building wiring system.

1		Connect handset cord to socket in handset
2		Second end of handset cord connect to socket assigned as on the backside of phone
3		Connect: phone cable (for CTS-202 and CTS-202.Plus) Ethernet cable (for CTS-202.IP) into phone socket assigned as LINE
4		Opposite end of CTS-202 and CTS-202.Plus cable connect to the socket of phone network. For phones CTS-202.IP opposite end of Ethernet cable connect to computer network socket. Attention! Before connecting phone contact with network admin to assure, that socket is intended for specified system phone. Phones can be connected only to sockets allowed to it.
5		For system phone CTS-202.IP connect power supply to socket assigned as 36V/0,1A. For system phones CTS-202.Plus connect power supply to socket assigned as POWER. For both situation opposite end of power cord connect to power socket 230V. ATTENTION! System phones CTS-202.IP can be also powered from network devices with function Power over Ethernet. In this situation power supply is not needed.
6		Proper phone operating is announced by PABX notification on display and signal in handset.

Few practical notes for proper CTS-202 and CTS-202.Plus phones installation:

Always connect phones using telephone or computer cable with diameter not less than 0.5 mm².

Conductors must be connected accordingly.

It is not recommended to connect phone and ISDN on common phone cable.

Sugested distances phones and PABX are as follows:
- up to 200m – for phones without power supply, proper phone operating,
- more than 200m – if You don't use additional power supply improper phone operating may occur,
- more than 400m – using power supply is obvious for proper phone operating.

REMEMBER!

For system phone CTS-202.Plus always delivered in standard power supply device should be connected.

For CTS-202.CL power supply decice is delivered as option. If there is long distance between PABX and phone and worse cable quality, problems with phone CTS-202.CL and CTS-202.Plus operating may occur. Solution of these problems is connecting power supply device.

CTS-202.IP configuration for operating with PABX

Phone configuration for operating in LAN network

ATTENTION!

Phone CTS-202.IP must be configure in PABX, by admin, to cooperate with PABX. Phone is authorized in PABX using idividual phone MAC address entered in PABX configuration. Individual MAC address for every phone can be find on label located on the bottom side of phone casing. It can be also read in phone menu (VoIP settings status).

Example 1 – server DHCP works in LAN network, all network settings are defined automatically.

CTS-202.IP phone is by default configured to work in LAN network withDHCP server. After connecting to LAN network and power source phone automatically find PABX and connect to it. After connection phone is ready to work.

Example 2 – DHCP server is not used in LAN network, network settings are defined manually.

Before connecting CTS-202.IP phone to LAN, it preconfiguration should be done. To do it, phone should be connected to 230V power line using power supply. In phone connected to power source only one menu will available – VoIP.

VoIP(1)
	Network settings (1)
	VoIP server (2)
	Status (3)

Using context keys and option Network settings in VoIP menu should be selected.

Network settings – in this option all settings needed for opereting phone in specified network should be done. Respectively:

resign from downloading settings from DHCP server,
enter phone IP address,
enter subnet mask,
enter default gateway address,
enter DNS server address.

After answering Yes on final phone question Set? phone restarts and performs initialization process. If VoIP server address has not been previously defined, phone informs about no connection to PABX.

To set server VoIP IP address, using left context key select menu VoIP. Pressing key move to option VoIP server and pressing Select key enter to submenu and write address.

If phone CTS-202.IP is connected to the same local network as PABX, then VoIP server address can be automatically downloaded without neccessity ofmanual entering this address. To do this, menu VoIP should be selected, and than submenu VoIP Server. In this submenu an option Auto should be selected uzing contex key .

IP address or VoIP server name should be defined by LAN or PABX admin.

-Name/IP Address-
Auto          Back

Status – enables to familiarixe with phone current VoIP settings

After connecting phone to LAN and establishing connection to PABX, VoIP menu (position 6) is available and contains following options. Additional submenu Codec is available.

VoIP(6)
	Network settings (1)
	VoIP server (2)
	Codec (3)
	Status (4)

Codec – this menu enables selection of audio codec which will be used to establish calls. Audio codec selection affect band width needed to establish call. We can select:

G.711 – wider band,
GSM – narrower band,
Auto – codec is selected automatically depending on phone location in LAN network with PABX CCT-1668. If phone is located in the same network, codec G.711 is used, otherwise GSM codec.

Phones configuration for work in WAN network (internet)

ATTENTION1!

To force PABX to cooperate with CTS-202.IP, appropriate settings in its configuration should be made by PABX admin. Phone registering in PABX us done using phone MAC address. This number is individual for every phone and can be find on label located on back side of phone casings. It can be also read in phone status menu (VoIP settings status).

ATTENTION2!

Phone using port 5522.

Before connecting CTS-202.IP phone to WAN network (internet) phone preconfiguration should be done. To do it, phone should be connected to 230V power lineusing power supply. In phone connected to power source only one menu will available – VoIP.

VoIP(1)
	Network settings (1)
	VoIP server (2)
	Status (3)

To enter settings You should use left context key Menu and than select VoIP menu VoIP. After pressing key Select You can set necessarily network settings. Menu can be scrolled by key .

Network settings – in this menu phone network settings should be set. First should be decided if settings will be downloaded from DHCP server. If no, following data should be entered:

phone IP address
subnet mask
default gateway address
DNS server address

VoIP server – in this menu You should enter VoIP server IP address (or name), that means PABX CCT-1668 address.

Status – in this menu current VoIP phone settings can be displayed.

After connecting phone to WAN network (internet) and conecting to PABX, VoIP menu (position 6) is available and contains following options. Additional submenu Codec is available.

VoIP(6)
	Network settings (1)
	VoIP server (2)
	Codec (3)
	Status (4)

Codec – this menu enables selection of audio codec which will be used to establish calls. Audio codec selection affect band width needed to establish call. We can select:

G.711 – wider band,
GSM – narrower band,
Auto – codec is selected automatically depending on phone location in LAN network with PABX CCT-1668. If phone is located in the same network, codec G.711 is used, otherwise GSM codec.

Error messages and solving problems with connecting phones CTS-202.IP to PABX

Message text on displayWhat should be done?

Set VoIP server parameters	Valid IP address or name of VoIP server (PABX) should be entered.
Set LAN network parameters	Switch on network settings downloading from DHCP server or enter these settings manually.
Check power cord	No power. Check power cord.
No PABX	Automatic PABX search is enabled in phone – PABX can't be found in network,where phone working in. Enter PABX IP address (VoIP server) manualy and check phone configuration.
No answer from DNS server	Connection to DNS server can't be established.
No answer from VoIP server	Connection to PABX can't be estasblished. Following reasons are possible: phone network settings or PABX IP address are incorectly defined, PABX is switched off.
No answer from DHCP server	DHCP server can't be found in LAN network. Contact with network admin.
Connection to server established - waiting for authorization	Your phone is properly configured and connection to PABX is established. You have no rights to using phone connected to PABX. Contact with PABX admin.
Invalid VoIP server name	Invalid PABX name entered. PABX name cann't be found on DNS server.

Connecting CTS-232 console

1

Screw on joining element to console, using fixing bolt included in delivery scope and screw on joining element to phone, using fixing bolt included in delivery scope

2

Plug connecting cable into console socket assigned as IN and plug second end of connecting cable into phone socket assigned as CONSOLE

3

Key F16
       Free


Change          Back

Check console - after pressing any key on console, its number should be displayed on phone screen.

Connection of headphones and external microphone

Headphones or phones with microphone – usually used in computers - can be connected to the phone.

1.Plug headphones cable terminal into socket assigned as

2.Plug external microphone cable terminal into socket assigned as

Attention!

Microphone and headphones grounds should be separated.

Remember!

Headphones maintaining mode is set automatically in phones CTS-202.CL and CTS-202.Plus after connecting headphones. It is announced by letter „H” displayed on screen. In phones CTS-202.IP headphones should be switched on using phone menu. It is possible to assign switch on/off option to programmed key (see chapter).

Connecting CTS-202.Plus and CTS-202.IP phonesto external call recording system

Phones CTS-202.Plus are prepared for cooperation with external calls recording system. Terminal (RJ-11) AUDIO OUT located in phone casing is used to connect phone to recorder:

Terminal	Meaning
1	Not connected
2	STERa recorder controll
3	VOICEa analogue signal from phone
4	VOICEb analogue signal from phone
5	STERb recorder controll
6	Not connected

Analogue signal from phone is tranfered on middle wires of AUDIO OUT terminal – VOICEa, VOICEb.

Wires STERa, STERb are used to switching on and off recording. „Shorting” status (resistance ca. 35) can be observed since lift handset (switching on speakerphone), till hang up handset (switching off speakerphone).

Audio and control signal polatrity is meaningless.

Output control parameters (AUDIO OUT):

max. striking current:	100 mA	continous
max. connected voltage:	200 V	peak
Cut off current:	<1 mA	for voltage 200 V
output capacity:	25 pF	for signal 50 V; f=1 MHz

ATTENTION:

While using TelephoneCTI.Plus application, AUDIO OUT socket in system phones CTS-202.Plus and CTS-202.IP is intended to direct phone connecting to linear or microphone input on computer audio card.

Phone settings

Ringing tone	Up to five phone ringing tone are available for selection.
Ringing volume	This function enables to select up to seven levels of ringing signal volume or switch off ringing.
Contrast	Settings of optimal visibility of signs on LCD display.
Language	System phone enables displaying messages in three languages: polish, english and russian. Polish language is set as default.
Auto answer	Phone enables automatic answering calls without user activity by switching on speakerphone or headset. Connection is interrupted in 5 seconds after hanging up handset by caller. Połączenie zostaje rozłączone po 5 sekundach od odłożenia słuchawki przez inicjatora.
Auto dial	Automatic number dialing after short pressing programmable key (circa 1 second) if for this key internal number or index from phone book is programmed, without wating for lifting handset.
Volume (Amplification)	Sp-ph power - Speakerphone or headset (if connected and turn-on) volume tunning. Handset power - Handset volume tunning.
Own number	Preview of phone number assigned to phone.
Outgoing digit	Programm outgoing digit which will be necessarily for establish outgoing calls (usually 0). This settings is necessarily for appropriate dialing and redialing numbers from phone book.
Headphones	Enables switch on/off connected headphones. If headphones are switched on, after pressing SPK ON key all audio signals can be hear in headphones instead of speakerphone.
Phone name	This option enables assigning phone name (ex. Trade Dept.) visible on display in standby mode.
Factory settings	This function deletes all settings made by user. It should be remember, that this function deletes also all numbers from private phone book and numbers programmed for keys.
Software version	This option shows phone firmware version.

Phone maintenance

Phone menu (navigation through phone menu)

Navigation through phone menu can be done by keys located in upper part of keypad, below display.

Function of each key is displayed on phone and depends on menu position

	Key functions depend on context: Menu Select Change Save Current key function is displayed on the left side over the key.
	Key functions depend on context: Book Back Exit Current key function is displayed on the right side over the key.
	* Scrolling up After pressing this key in phone stanby mode: 1 time – opening private phone book, 2 times – opening publik phone book^[1].
	* Scrolling down After pressing this key in phone standby mode, list of extension numbers is displayed.

Quick return to main screen

It is possible to return to main screen from any place of phone menu system (ex.: when You want to look at caller number). To do this You must press SPK OFF key.

Function keys

Phone is equiped in function keys, which realize functions programmed by manufacturer

	Flash	FLASH signal (holding on established call) for selecting PABX services or dialing another extension number during call. In standby mode, after pressing this key option Menu >> Services is selected.
	Redial	By pressing this key in standby mode Ypu can select:* 1 time – list of lastly dialed numbers, 2 times – list of answered calls, 3 times – list of missed calls.
	SPK ON	* Switching on Hands Free mode. Pressing this key during ringing,answering call. Start "cold" number dialing (without lifting handset).
	SPK OFF	* Switching off Hands Free mode or disconnecting if You have lifted handset. During rtinging it causes refuse call. Immediate return to phone main screen if You are in any menu. If there are missed call it is possible to delete them without viewing details.
	Mute	* Switching off microphone in handset or Hands Free mode (internal or external microphone)^[2]. Next pressing this key switching microphone on. It there is an ACD group in PABX, this key can be used to preview status of ACD group. Only one condition is appropriate configuration of CTS display in ConfigMAN application, it should be done during PABX installation. Number of waiting calls, number of currently serviced calls, current waiting time, average call time, number of available agents, etc can be displayed on phone screen.
	Regulation button	* During standby mode as well as during call decrease ringer volume. During dialing and after establishing call, decrease handset loudness, speakerphone loudness or loudness in headseds if used. Its used to regulation in options Menu >> Settings >> Amplification >> Sp-ph power / Handset power
	Regulation button	* During standby mode as well as during call increase ringer volume. During dialing and after establishing call, increase handset loudness, speakerphone loudness or loudness in headseds if used. Its used to regulation in options Menu >> Settings >> Amplification >> Sp-ph power / Handset power.

Menu structure

Call register (1)
	MIssed calls (1)
	Received calls(2)
	Dialed numbers (3)
	Erase last call (4)
	Last call time (5)
	Last call cost (6)
Program keys(2)
	Press a key
	Set default
Services (3)
	Call forward. (1)
	Don't disturb (2)
	Urgent call (3)
	Phone lock (4)
	Temporarily CLIR (5)
	Park (6)
	3PTY (7)
	Fixed account(8)
	Urgent ringing (9)
	Call intercept. (10)
	Private call (11)
	Working mode (12)
	MCID (13)
	Voicemail (14)
	Conference (15)

Settings (4)
	Ringing tone (1)
	Ringing volume (2)
	Contrast (3)
	Language (4)
	Auto answer (5)
	Auto dial (6)
	Amplification (7)
	Own number (8)
	Outgoing digit (9)
	Headphones (10)
	Telephone name (11)
	Factory settings (12)
	Program version (13)
DECT (5) *
	Registering (1)
	Remove handset (2)
	Status (3)

VoIP (5)**
	Network settings (1)
	VoIP server (2)
	Codec (3)
	Status (4)

* - menu available only in CTS-202.Plus phones

** - menu available only in CTS-202.IP phones

Quick moving through menu

To quick move to selected menu option, it is possible to use method of quick moving through menu.

1.Press Menu key.

2.Select from keypad number of option you want to select, ex. if you want to select option Settings >> Own number, select digit 4, and next 8.

Receiving and finishing call

1.Incoming call is signaling by mean of ringing, flashing LEDs on phone and showing of number or name of caller on phone display.

2.If You want to reject call, press SPK OFF key or left context key Details, and next select option Reject. In such situation, call is stored in Received calls list.

3.If You want to mute incomming call ringing, press key Mute. After hanging on the handset by caller, call is stored in Received calls list.

4.To answer call lift the handset, or if you want to activate Hands Free mode, press SPK ON key.

5.After establishing connection start talking.

6.To finish call hang up handset or press SPK OFF key.

Dialing number from phone keypad

"Hot" number dialing

1	Lift handset or press SPK ON key.
2	Dial required number.
3	After establishing call, start talking.
4	To finish call, hang up handset or press SPK OFF key.

After lift handset, phone wait 15 seconds for number dialing (from phone book or keypad). After this time PABX stay unavailable.

"Cold" number dialing

1	Dial required number
2	Lift handset or press SPK ON key.
3	After establishing call, start talking.
4	To finish call, hang up handset or press SPK OFF key.

Dialing numbers from lists

Redial

1.Press REDIAL key. On phone display last dialed number appear (it is first entry in dialed number list, this list can be scrolled using / keys).

2.Lift handset or press SPK ON key.

3.After establishing call, start talking.

4.To finish call, hang up handset or press SPK OFF key.

Selecting extension number from subscriber list.

1.In standby mode press [[Image:]] key (arrow down).

2.Press appropriate key to select starting letter of required phone book entry.

3.Scroll subscriber list until required entry is displayed.

4.Lift handset or press SPK ON key.

Extension number presentation status

If You select subscriber or group from extension number list, its status is presented on phone display. Group is busy if all phones in group are busy. Subscriber without comment is not displayed in subscriber list. Selecting left context key Change during subscriber list review results in selecting option of assigning this subscriber to speed access key.

Call history (Call register)

Call register is list of last calls for this phone

Calls are remembered in following categories:

Missed calls,
Received calls,
Dialed numbers.

To establish call with number from call register:

1.Select key Menu >>Call register >> Missed calls, Received calls or Dialed numbers.

2.Select number you want to dial.

3.Lift handset or press SPK ON key.

Using speed access keys

Speed access keys are programmable keys with LED signaling. They are located in column on the right side of system phones CTS202.CL, CTS202.Plus, CTS-202.IP and consoles connecting to them.

Programming possibility means, that user for each key can assign one off following function:

External number (subscriber, accout or group),
Entry index (entry in private or public phone book),
Service,
Function,
Line (trunk or trunk group status signaling, possible to programm by PABX admin).

If key is not programmed, LED near this key is continously turned off and after pressing this key information about no function assigned to this key is displayed on screen.

Key  (F8)
   Free
 
Change    Back

Next in this chapter You find descriptions how to programm and use speed access keys as well as how to interpret key LED signaling. As long key pressing You should mean pressing key and its holding about 3 seconds until activate function assigned to this key.

Programming speed access keys

1		Press selected programmed key on phone or console.
2	Change	Press Change key.
3	or	Select category which should be assigned to this key: Extension number(subscriber, accout or group), Phone book (entry in private or public phone book), Service, Function and press context key Select. After selecting category define extension number, phone book entry, service or function which should be assigned to this key.
4	Zapisz	Confirm selected entry.

Speed access keys can be also programmed by selecting – Menu / Program keys / Select a key.

Assigning trunk or trunk group to the speed access key can be done only by PABX admin.

Speed access keys – subscribers and accounts

Key LED meaning

Extension number or account can be assigned to speed access keys. Key LED of programmed key with extension number or account assignment :

is turned off – subscriber/account is available,
shine continously – subscriber/account is currently busy,
blink evenly – subscriber/account is called,
blink unevenly – with different frequency than above, short blink inform that account is not recalled on any phone or DND service is active for subscriber.

ATTENTION!

For account LED signaling is realized for both - account and extension number where account is recalled.

↑ Only if subscriber is authorized to use public phone book (set by PABX admin).
↑ CTS-202.IP phone is not equipped in speakerphone loudspeaker.

Using a key

After short pressing key with assigned subscriber/account number, information about this extension number is displayed on phone screen ^[1].
After long pressing key with assigned subscriber/account number, if this extension number is free, causes dialing to this extension number. If service Urgent ringingis activate on caller extension number, dialed extension number ringing specially (for analogue phone) or call is routed on speakerpone (for CTS system phone).
After long pressing key with assigned subscriber/account number, if this extension number is actually called, causes interception of this call ^[2].

Speed access keys – groups

Key LED meaning

Group can be assigned to speed access key. LED for key with group assigned:

is turned off – if nobody call group number and maximal group capacity isn't reached,

shine continously – if maximal group capacity is reached,

blink evenly – if anybody call group or waiting for group call establishing

Using a key

After short pressing key with assigned group results with displaying info about this group on phone screen, specially about: number of call waiting in queue/number of busy group agents/group capacity. After every short pressing the same key next waiting call is presented on phone display, if there are any. If nobody wait in queque, lifting handset after short pressing key results in dialing group extension number. If there are calls in queue, any call can be intercepted by lifting handset when this call is presented on phone display.
If there is no waiting calls in queue fo specified group, long pressing key with assigned this group results with dialing this group number. If there are waiting calls in queue for group to put Yourself in queue, You must lift handset or press SPK ON key and dial group number.

ATTENTION!

For conference group, in standby mode and during ringing, pressing key with assigned conference group information about group is not presented, it is not possible to preview or intercept calls.

Speed access keys – phone book entries and services

Key LED meaning

Phone book entry or service (ex. DND or call forwarding) can be assigned to speed access key. If phone book entry is assigned to programmed key, key LED is turned off for a whole time.Key LED with assigned service (excluding Voice mai service):

is turned off – if service is inactive,
shine continously – if service is active.

Using a key

After short pressing key with assigned service, causes activation of service and displaying confirmation message on phone screen. Next short pressing this key deactivate service.
After short pressing key with assigned phone book entry, causes displaying this entry on phone screen.
After long pressing key with assigned phone book entry, causes start dialing assigned number.

LED meaning for individual/group voice mail

LED near the key with assigned Voice mail service or extension number of public voice mail box:

is turned of – no any messages (voice mail box subscriber/public is empty),
blink slowly (shining/pause: 1s/1s) – new message(s),
shine continously – there are saved message(s) in voice mail box,
blink quickly (shining/pause: 0,5s/0,5s) – subscriber/public voice mail box is full.

Using key with individual/group voice mail box assigned

After short key pressing voice mail box extension number is displayed (similarly like for key with assigned subscriber) and info about voice mail messages [number of new (not listened) messages/number of all messages]^[3].
After long pressing key with assigned Voicemail service, this service is activated and appropriate message is displayed on phone display. After next long pressing this key, service is deactivated.
After long pressing key with assigned group voice mail box extension number, call with this number is established.

Speed access keys - functions

Following functions can be assigned to speed access key:

Private book – access to entries in private phone book (shortcut to first option in menu Book),
Public book – access to entries in public phone book (shortcut to second option in menu Book),
Search – searching name in private and public phone books (shortcut to third option in menu Book),
Headphones – switching on/off headphones (alternative for selecting option Menu >> Settings >> Headphones >> Turned on/Turned off),
Auto answer - switching on/off [#Auto answer Auto answer] option (alternative for selecting option Menu >> Settings >> Auto answer >> Yes/No).

LED meaning

If functions 1÷3 are assigned to the key, signaling LED near this key is continously turned off.

Signaling LED near the key with assigned function 4:

is turned of – headphones are turned off,
shine continously – headphones are turned on (additionally letter H can be seen on phone display).

Signaling LED near the key with assigned function 5:

is turned of – automatic call aswering is inactive,
shine continously – automatic call aswering is active (additionally letter A can be seen on phone display).

Using key

After short pressing key with assigned function 1÷3 appropriate option of Book menu is displayed.
After short pressing key with assigned function 4 or 5 function is activated and appropriate letter is displayed on phone display – this letter confirms activation. Next short pressing of this key deactivate function.

Speed access keys – lines

Specified lines can be assigned to keys. Line is common name of trunks and trunk groups.

ATTENTION!

Assigning lines to speed access keys can be done only by PABX admin from inside ConfigMAN application. It cannot be done using phone.

LED meaning

If LED near speed access key with assigned line:

is turned of – line is free,
shine continously – line is busy,
blink quickly (0,5sec. / 0,5sec.) – line is damaged,
blink slowly (1sec. / 1sec.) – line is dialed.

Using key

Short pressing key with assigned line results in displaying on phone display information about line, especially its name and bussyness.
Long pressing key results in line reservation to use it for call you want to dial. To establish such call, after reservation handset should be lifted or SPK ON key pressed and dial required number.
LIfting handset during review of dialed line results in call interception.

Conveniences concerning speed access keys

Preview and change of programmed key

If you want to review what is assigned with speed access key –press Menu key in phone standby mode, and next speed access key which you want to check. Info about selected speed access key is displayed on phone display. Changing function assigned to speed sccess key is possible in this situation after pressing context key Change.

Call interception

If you have an extension number assigned to speed access key, interception of calls to this number is possible if you authorized to do this. If extension number is dialed, to intercept call it is enough to press and hold speedc access key during circa 3 sweconds, call is interceted by your phone.

Call transfer without answering call

It is possible to transfer call to another subscriber or individual/group voice mail without answering it. To do this, you should while ringing press and hold key with assigned subscriber or voice mail box.

ATTENTION!

If appropriate privileges are not set this subscriber, call transfer can't be realized.

Call can be transfered to selected subscriber or group from extension number list. To do this, you should:

First method

1.During incomming call ringing, if you want to transfer call without answering this call, press key (arrow down – entering into Extension numbers list).

2.Select subscriber you want to transfer to (you can use quick searching in Extension numbers list).

3.Press context key Details.

Second method

1.During incoming call ringing, if you want to transfer call without answering this call, press context key Details.

2.Select option Transfer.

3.Enter extension numbrer you want to transfer to or press key and select its name.

4.Press context key Divert.

Urgent ringing

If extension number is assigned to speed access key, to dial this number with Urgent ringing service, key must be pressed and holded for 3 seconds.

ATTENTION!

Availability of „Urgent ringing” service depends on extension number privileges. If subscriber isn't authorized to use this service, dialed number is alarmed by regular ringing.

Description of another method of using „Urgent ringing” service can be found in chapter 2.4.

Programmed keys list

In menu Program keys status of phone speed access keys can be reviewed.

1.After selecting menu option Program keys press key List.

2.By pressing keys Up/Down, you can move between list entries. Additionally LED near currently reviewed key is light up.

3.Pressing Change key results in entry into programming menu.

Phone book

Following phone books are available using CTS phone:

Private phone book – phone book with entries available are only for this phone,
Public phone book – phone book with entries available are for all PABX users,
Extension number list – list of all extension numbers in PABX.

Extension number list is updated by PABX admin and can'y be changed by subscriber. Phone books are stored in PABX and there is no possibility to loss phone book if phone is changed or damaged.

Searching entries in phone book (public and private)

1.Press Book key.

2.Select option Search.

3.Enter searching name fragment and next press context key Search.

Saving data to phone book

Adding new entry to phone book

First method

1.Pess Book key.

2.Select phone book you want to add new entry (Private book or Public book).

3.Press context key Details, and next select option Add name^[4].

4.Enter name to save phone number.

5.Press context key Number.

6.Enter number you want to save in selected phone book.

7.Confirm entry by pressing context key Save.

Second method

1.Press Book key.

2.Select option Add to private or Add to public^[5]

3.Enter name to save phone number.

4.Press context key Number.

5.Enter number you want to save in selected phone book.

6.Confirm entry by pressing context key Save.

Saving number during call

During call, if interlocutor presented yourself with his(her) phone number, this number can be stored in phone book.

1.Press key Details.

2.Select option Book.

3.Select option Add to private or Add to public

4.Enter name to save phone number, and press Number key.

5.Confirm entry by pressing context key Save.

Entry from call history

1.Press context key Menu and select Call register key.

2.Select appropriate call from call history.

3.Press context key Details while appropriate call is visible on phone display.

4.Select option Add to private or Add to public.

5.Enter name and confirm it by pressing context key Save.

Entries operations

Edition

Entries edition in public phone book can be done if appropriate privileges are assigned to subscriber extension number. Otherwise, edition of entries in private phone book is not limited by any privileges assigned to subscriber extension number.

1.In standby mode press context key Book.

2.Select phone book to edit entry.

3.Find entry to edit.

4.Press key Details and select Edit option. Number or comment can be edited.

5.Confirm changes by pressing Save key.

Copying between phone books

Copying entries between public and private phone book can be done if privileges to edit and save entries in public phone book are assigned to subscriber extension number.

1.In standby mode press context key Book.

2.Select phone book to copy entry. After selection confirmation you can start searching entry to copy.

3.Find entry to copy between phone books.

4.Press Details key and select option Copy. Accept it.

Moving between phone books

Moving entries between public and private phone book can be done if privileges to store in public phone.

1.In standby mode press context key Book.

2.Select phone book, you want to move entry from. After selection confirmation you can start searching entry to copy.

3.Find entry to move between phone books.

4.Press Details key and select option Move. Accept it.

Erasing entry from phone book.

Erasing entries in public phone book is only available for subscriber with appropriate privileges assigned to his/her extension number.

1.Press Book key. Select option Search.

2.Enter from keypad first letters of name you want to erase.

3.If entry displayed on LCD is not entry you want to erase, you can move to requested entry using phone up/down keys.

4.Press Details key and select option Erase. Accept it.

Assigning speed access key to programmed key

If specyfied entry is often used (you often dial number entered in one of phone books), it is reasonable to assign this entry to speed access key. Using such programmed key is described in chapter 1Speed access keys – phone book entries and services.

1.In standby mode press context key Book.

2.Select phone book, from which you want to select entry to assign to speed access key. After selection confirmation you can start searching entry to copy.

3.Find entry you want to programm.

4.Press context key Details and select option Assign key.

5.Press speed access key to assign entry.

6.Accept selection by pressing Save.

Services

Every service supported by PABX can be obtained from keypad of system phone after lifting handset.

Description of all PABX services and their selection method are included in instruction manuals for Slican CCT-1668.S, L, EU or Slican MAC-6400. Below You can find method of selecting services using phone menu.

To improve selecting services on system phone they can be assigned to programmable keys.

Transfering call

1.Currently established call, both internal or external can be transfered to any number in PABX or outside PABX, if extension number, where do You want to do it, is granted with appropriate privileges.

2.To do this press FLASH key.

3.Dial number You want to transfer call to.

4.If You transfer call with announcement, please wait until somebody lift hanset of phone where You want to transfer it. If You don't want to announce call, hang up handset immediatelly.

ATTENTION! To return to waiting subscriber, press FLASH key twice. If You want to transfer call further, above procedure should be repeated from point 2

5.If You hang up handset, PABX establish transfered call.

Do not disturb – DND service

„Do not disturb” service lock phone for incoming calls. In this situation caller hears following announcement: „Subscriber is temporarily inaccessible, please, call again later” and on phone screen message „please don't disturb”.

„Do not disturb” service operate differently depending on type of dialed number:

when caller dial group number, extension number with activate DND service and belonging to group is treated as busy,
when caller dial directly subscriber number with activate DND service, hears announcement „Subscriber is temporarily inaccessible, please call again later”.

Attention: If DND service is active, call forwardings to this extension number don't function.

1.Move into Menu >> Services >> Don't disturb >> On/Off. Accept selected option by pressing Next key. Exit Menu by pressing SPK OFF.

2.Service activity is announced by message Do not disturb on display.

Attention: If dialed subscriber has DND service activated, on caller CTS-202 or CTS-202.Plus system phone message „please don't disturb” is displayed.

Park

First method

1.After establishing call or answering incoming call, press Details key and than select option Menu >> Services >> Park.

2.After voice message „Service is accepted” user should hang up handset and press FLASH key, to dial number we want to contact, ex. to consult parked subscriber problem. Call will be parked for 3 minutes and interlocutor will hear melody on hold.

3.To return to parked call, You should once more move into Menu >> Services >> Park.

4.Accept unparking and wait for ringing, which is signal with display message Returning...

Second method

1.After establishing call or answering incoming call, press Hold key

2.After voice message „Service is accepted” user should hang up handset and press FLASH key, to dial number we want to contact, ex. to consult parked subscriber problem. Call will be parked for 3 minutes and interlocutor will hear melody on hold.

3.To return to parked call, You should press Unhold key.

4.Wait for ringing, which is signal with display message Returning...

Phone lock

„Phone lock” means assigning lowest privileges to this extension number. Subscriber from locked phone can only establish internal calls and alarm calls (according A class privilegess defined in PABX). On locked phone temporarily or fixed account can be recalled. If service is active phone menu cannot be editet and there is no accerss to system keys. „Phone lock” service is active until canceling it from phone.

Phone lock can be also activate by PABX admin. Such lock cannot be switched off by subscriber.

1.Move into Menu >> Services >> Phone lock.

2.Switch on or off phone lock service. Enter PIN (lock code) consist of four digits, ex. 6565 (first lock code is granted by PABX admin and subscriber should change it using service #55).

3.Accept. Exit from Menu.

4.Service activity is announced by message Phone lock on phone display.

5.To unlock phone You should press context key Unlock and enter the PIN code.

Fixed account

„Fixed account” means recalling of other extension number privileges on this phone. Recalling account on specified phone causes canceling this account on other extension numbers - if it was recalled. Fixed account can be also recalled on locked phone.

1.Select Menu >> Services >> Account. Recall or cancel service.

2.Enter account number.

ATTENTION! Pressing key, we can obtain access to subscriber list, where we can select account number using up/down arrows or find it according few first name letters.

3.Accept.

4.Enter account PIN consist of four digits (PIN is granted individually by PABX admin and can be changed using service #55). Accept it

5.Exit Menu. Service activity is announced by message account on phone display.

Urgent ringing

Urgent ringing is a service with automatic speakerphone switching on for CTS phones or special ringing for analogue phones.

ATTENTION! Description of another method of activate urgent ringing service can be found in chapter 5.1.4.

1.Move into Menu >> Services >> Urgent ringing.

2.Exit Menu. Service activity is announced by message URGENT RINGING on phone display.

3.This service is active for number dialed immediately after its selection.

Call forwarding

Call forwardings are PABX services which reroute incoming calls to another phone or account. Call forwarding is active until cancel it.

1.Move into Menu >> Services >> Call forward.

2.Activate or cancel call forwarding.

3.If you activate call forwarding enter number where You want to reroute calls ex. 123

ATTENTION: Using arrow keys it is possible to select type of phone book (extension number list) you want to select number from. After selecting type of phone book (extension number list), appropriate number can be selected using Up/Down keys or entering few first letters of its name.

4.Accept and select forwarding type:* All

Incoming direct
Internal
Incom. announced
From group

5.Accept selection and select forwarding condition:* Unconditional

While busy
When no answer
While DND

6.Accept selection and exit Menu.

7.Service activity is announced by message call forward. and letter F^[6]on display.

ATTENTION! Call forwardings type „From group” with condition „While busy” are not performed by PABX. Additionally if phone is ringing becasuse of group call, only forwardings type „From group” with condition „Unconditional” are active.

Malicious call (MCID)

Registering call as malicious in upper exchange and marking it as malicious in PABX call bufer.

Recalling service during call

1.Press Details key and next Move into Menu >> Services >> MCID^[7].

2.Accept service.

Recalling service after finishing call

During 30 secs. after hang up handset by caller MCID key should be pressed.

Attention: Handset cannot be hang up first on malicious call target phone.

3PTY calls

First method of 3PTY call service activation:

1.After establishing call with first interlocutor, press FLASH key and hold connection.

2.Dial number of second interlocutor and during call move into context menu Details >> 3PTY .

3.Accept service. 3PTY call is now established.

4.During such call there is posible to switch between interlocutors. In this situation one interlocutor is hold on.

Second method of 3PTY service activation:

1.After establishing call with first interlocutor, press FLASH key and hold connection.

2.Dial number of second interlocutor and diuring call press FLASH#3.

3.PTY call is established.

ATTENTION: 3PTY caller can switch between interlocutor pressing context menu Details. Next using navigation keys You can select interlocutor to talk with.

ATTENTION: 3PTY call can be finished by pressing FLASH#0 by caller.

ATTENTION: After hang up handset by caller 3PTY call is disconnected.

ATTENTION: Caller can talk to only one dialed subscriber (second subscriber hears melody in handset). It is poissible by pressing FLASH#1 or FLASH#2 (where 1 means that caller will be tak to first dialed subscriber and 2 means that caller will be talk to second dialed subscriber). After pressing FLASH#3 3PTY call is reestablished.

Call interception

This service enables to intercept calls incoming to another extension number. Only two conditions must be fulfiled to realize this service - extension number from which You try to intercept call must belong to the same PickUp group - call interception group and extension number from which You try to intercept call has no checked field PtcPck.

1.If You want to intercept call routed to another extension number belonging to the same PickUp group as Your extension number, move into Menu >> Services >> Intercept call.

2.Move into Menu >> Services >> Intercept call. Accept selection. Lift hanset.

ATTENTION! Call interception can be also realized by lifting handset or pressing SPK ON key and selecting from keypad #37.

Temporarily CLIR

This service causes switch off number presentation for the time of one call.

1.Move into Menu >> Services >> Temporarily CLIR. Accept selection.

2.Lift handset or press SPK ON key.

3.Dial required number.

Private call

This service causes change of privileges (setting of private privileges for this extension number) as well as registering this call as private in call register in PABX. Such calls are identyfied by charging software to differentiate office and private calls.

1	Move into Menu >> Services >> Private call. Accept selection.
2	Lift handset or press SPK ON key.
3	Dial required number.

Urgent call

Urgent call means granted higher privileges for the time of one call. Urgent call service is available if extension number is granted with privileges to realize this service. Service is valid for one call established from phone with this extension number.

1	Move into Menu >> Services >> Urgent call. Accept selection.
2	Lift handset or press SPK ON key.
3	Dial required number.

Working modes

This service enables manual change of PABX working mode. Extension number can be granted with privileges to changing PABX working mode. It is also posible to assign working mode changing to system phone key.

1.Move into Menu >> Services >> Working mode. Using navigation keys appropriate working mode should be selected (ex.: Day - manual mode)

2.After selecting appropriate working mode, press Next key. PABX ask for access code.

3.After entering Access code PABX ask for determining hour of validation new working mode. (If You don't determine this hour, selected working mode will be valid until next working mode changing according working mode time table).

Voice mail

This service enables caller to leave the voice message for specified subscriber.

ATTENTION!

To use this service, PABX admin should assign voice mail box to specified subscriber and define voice mail extension number, voice mai extension number is used for service activation and for inform about new messages as well as for managing thes messages.

Voice mail service is activated after setting call forwarding to voice mail extension number:

1.Move into Menu >> Services >> Call forward. >> Activate. Accept selection by pessing key Next.

2.Enter extension number of voice mail (default 1000) and accept by pressing Next key.

3.Select type of calls, which should be forwarded to voice mail:

All
Incoming direct
Internal
Incom. announced
From group

and accept it.

4.Select voice mail forwarding condition:* Unconditional

While busy
When no answer
While DND

5.Accept and exit from Menu.

6.Servis activity is signal by letter V^[8] in right upper corner of display.

To deacvtivate/activate previously activated service (deactivate/activate set previously defined call forwarding to voice mail box):

1.Move into Menu >> Services >> Voicemail >> Off / On. Accept selected option by pressing key Next. Exit Menu, for example by pressing SPK OFF key.

2.Active service is signal by letter V in right upper corner of display.

Remain information concerning voice mail using (recording private message – service #79, informing about new messages and its listening) can be found in PABX Slican CCT-1668.S, L, EU or MAC-6400.

Conference

This service enables to simultaneous connect many persons and establish phone conference. Participants of such conference can be PABX subscribers and persons from outside equiped with any phone type. Maximal number of conference participants is equal to:

8 for Slican CCT-1668,
31 for Slican MAC-6400.

Subscriber who initiate conference can manage this conference (is Custodian of this conference).

1.Move into Menu >> Services >> Conference. Information as on bekow picture will be shown on phone display. From this moment phone is busy – it is impossible to call its extensionb number.

Creating..
Conference
  
  (00:00)
Details     Partic.

2.To add participant to the conference, context key Details should be pressed and than option Add member should be selected. After selection of this option, selection od\f new conference participant is possible. It is possible by:

entering new number (internal or external),
pressing key Book and selection from appropriate phone book or extension numbers list^[9],
pressing speed access key with assigned number (interrnal or external).

After adding participant using key New or automatically (if key with assigned subscriber/number was pressed) display returns to status presented below, it enables to add next participants:

-Number-
Book    Back

3.Press Back key, if all participants were added to the conference. Display will presents itself as follows:

In second row from the bottom information acording following standard are presented:

(aa/bb)

where:

aa – nuber od active participants (subscribers participating currently in conference),

bb – number of all conference participants.

To review participants list, press Partic. context key, and than use buttons Up/Down. It is possible to delete participant from list, by selecting Erase from context menu Option.

Creating..
Conference
  
  (00/06)
Options    Partic.

4.To establish conference call:

First method

During reviewing participant list or if display presented itself as on picture in point 3 of this table, lift handset or press SPK ON button. Display will be as follows:

Phones of selected participants upringing and after answering announcement „Teleconference” can be hear.

Calling..

Second method

When display mentioned in point 3 of this table can be seen, press Option key and select option Ring. Display will be as follows:

Phones of selected participants upringing and after answering melody is played until caller lifts handset or press the SPK ON key.

Preview..
Conference
  
  (00/06)
Options     Partic.

5.If conference is established (call was answered by at least one perticipant and conference custodian is active participant of conference, his/her handset is lifted) display will be seen as follows:

Talking to
Conference
0:45 
  (04/02)
Options     Partic.

Following options are available after pressing Option key:

Add member – adding new participant to already established conference^[10],
Call – this option is used to „cold” establish conference (caller handset is hang on) – see point 4 of this table,
Disconnect all– finishing conference,
Mute all – switching off microphone in phones of all conference participants (only conference custodian can speak),
Unmute all – switching on microphone in phones of all conference participants,
Quit – quiting conference without finishing it^[11]. After selecting thyis option phone display will be seen as follow:

Monday
12.12.10   13:23
Conference
  
Options     Book

In above status there are two methods or return to conference call:

a) by pressing Option key and than selecting option Conference you can review conference status (the same can be achiewed by pressing speed dialing key with this service programmed):

After lifting handset or pressing SPK ON key you can return to conference call.

Preview..
Conference
  
  (05/02)
Options     Partic.

b) lifting handset or pressing SPK ON key and then pressing key with programmed „Conference” service.

Button Partic. Is used to display list of conference participants, this list can be reviewed using Up/Down keys^[12]. Information concerning specified participants are presented on phone display:

-Particpants-
SUBSCRIBER NAME
  subscriber number
No.         (status)
Options        Exit

For selected participant following Options are possible:

Delete – disconnect conference participant,
Microphone ON/OFF – switching on/off specified subscriber [his/her status changes to (MUTE)/(CALL)],
Speaking now – switching on microphone only for one participant (microphones of remain participants are switched off),
Private call – direct call with only one participant.After such call it is possible:
a) next connecting this participant to the conference – by pressing key with programmed „Conference” service or select appropriate option from context menu visible on phone display during call,
b) disconnecting participant from the conference call – by hanging on the handset or pressing SPK OFF key.

Return to the conference call can be done using method described in point 5 of this table.

Custodian – transfering conference custodian function^[13].

Call override

This service enables to override existing call and even disconnect this call if it is possible. Service is allovable only from system phone. Subscriber who override extisting call can leave previously override call, without disconecting established call. This service can be realize only from extension number with appropriate privileges and if no one from parts of call to override hasn't protection against override. Service is also available when one part of call to override isn't PABX extension number.

1.If after dialing number You hear busyness signal, display will be look as below.

Calling..
SUBSCRIBER NAME
           1044
subscriber busy
AutoRD    Override

2.To override call press Override with right context key. After override display will be look as below.

Calling..
SUBSCRIBER NAME
           1044
1:41
Disconn.

3.To disconnect overrited call You should press Disconn. using left context key. To leave call without disconnecting it You should hang up hanset or press SPK OFF key.

Automatic redialing - AutoRD

If dialed number:

is currently busy,
nobody answer the call

or

if all lines in PABX are currently busy

, after selecting this service, if dialed number:

will be free (previously busy),
somebody will be near this phone (previoudsly nobody anwered the call)

or

any line in the PABX will be free,

calle will be announed by PABX about it and after lifting handsetpreviously dialed number will be automatically dialed. This service is available for internal and external calls.

Service activity time is limited to:

90 minutes for internal calls (both if number is busy or subscriber doesn't answer),
60 minutes for external calls if nobody answer the call,
30 minutes for line busyness,

10 minutes for external calls if target subscriber is busy.

ATTENTION:You can subscribe to the queue to

subscriber equipped in analogue phone,
subscriber equipped in system phone CTS-202.CL, CTS-202.Plus or CTS-202.IP,
ezternal subscriber available via ISDN trunk,
external subscriber available via GSM trunk
or
to any busy PABX trunk.

1

If target subscriber doesn't answer, after about 5-10 seconds AutoRD caption appears as a context key (left bottom corner of display), it enables to activate service.

Calling..
SUBSCRIBER NAME
           1044

AutoRD

2

If target subscriber is busy, immediatelly option AutoRD is available (context key in left bottom corner of display), it enables to activate service.

Calling..
SUBSCRIBER NAME
           1044
subscriber busy
AutoRD

3

If service is accepted, time to finish service activity is visible on display. By selecting context key Stop, you can deactivate service.

Monday
12.12.10  14:34
AUTO RD  (47:21)

Stop      Book

4

If target subscriber is already free or near his/her phone, phone inform you about this by ringing and following captions are seen on display:

if previously there were no answer

AUTO RD..
Is back

Options   Mute

if previously target subscriber was busy

AUTO RD..
SUBSCRIBER NAME

Options   Mute

If in this situation you lift handset, appropriate number is dialed once again.

DECT in phone CTS-202.Plus

ATTENTION: Number presentation on DECT handset is no possible.

ATTENTION: To register hanset, it's PIN code is obvious (read carefully handset manual).

ATTENTION: To register, also CTS PIN code is needed (if You haven't assigned PIN code contact with PABX admin).

Registering handset in system phone

1	Move into Menu >> DECT >> Register. Accept selection.
2	Handset should be register in one minute.
3	Confirm handset registration.

Example of DECT Moonlight³⁰⁰ by Premier^®.

Attention: As gray operation need to be performed in Moonlight³⁰⁰handset menu.

1.Move into menu DECT Moonlight³⁰⁰ handset and select option Register.

2.Accept selection.

3.Enter handset PIN code (default PIN for Moonlight³⁰⁰ is 0000) and accept it.

4.Select base station number where handset should be register.

5.Base station searching started.

6.Menu move into system phone Menu >> DECT >> Register

7.Select Accept selection.

8.Handset should be register in one minute.

-Registering-
  
    60s

Canel

9.Handset find number of base station to cooperate with and show this number on display.

10.Enter authorization code (it is extension number PIN code).

11.

-Registering-
  
  Completed

        OK

Removing handset

1.Move into Menu >> DECT >> Remove hanset.

2.Accept.

Status

1	Move into Menu >> DECT >> Status.
2	Info about software version, RFPI number of DECT module as well as IPEI code is shown on display.
3	Check if number saved in handset is the same as number saved in base station.
4	Accept.

Phone special functions

Pause in daled number

Pause in dialed number force temporarily dial waiting for a 5 seconds.

Example of dialing external number together with its extension number

1.While cold number dialing ( 9.2 "Cold" number dialing) or during adding new entry to phone book. (12.2.1 Adding new entry to phone book)

2.Dial first part of number (ex. main number for subscriber 0523251111)

3.Press „*” twice and letter „p” appear. (If You want to extend waiting time repeat it)

4.Dial second part odf number (ex. extension number 168)

Attention: Pause can be also added when we add new entry to public or private phone book.

Information about line busyness and PABX failures

If for specified phone, PABX activate option of displaying info about trunks busyness and option of displaying information about PABX failures, they will be displayed on phone display.

Monday
12.12.10  14:34
   BUFFER 84%
  
  (02/04)(03)

Menu       Back

In third row of display are presented info about PABX alarms, following types of info can be presented: call buffer overload, emergency power supply operation, trunk damages.

In second row from the bottom info about trunks busyness, according following formula, are presented:

(aa/bb)(cc)

where:

aa – number of busy lines,

bb – number of available lines,

cc – number of damaged trunks,

as a line you can assume:

one analogue trunk,
one ISDN (2B+D) channel,
one ISDN (30B+D)channel,
one VoIP channel,
one GSM trunk.

So called anonymous VoIP trunks are never presented as damaged. Additionally if ISDN (2B+D) trunk is damaged, from number in bb field two lines will be substracted (2 B channels). Symilarly for ISDN (30B+D) trunk, 30 lines will be substracted.

It should be also noted, that if VoIP trunk will be presented as damaged,no one channel will be substract from bb field, because this channel can be dynamically assigned to another trunk, so trunk damage is not equal to the channel damage.

Security requirements for CTS system phones

Stricty observe safety rules and proper using is unconditionally required for proper operating of system phone CTS-202.

Below You can find basic rules of accepting all warranty notes from users.

These rules concern installation, locating and requirements for electrical and data communication networks.

Installation:

CTS-202 should be installed and startup by service with manufacturer authorization.

All installation activities shoud be performed according assembling rules and local safety regulations.

Working environment:

CTS-202 should not be installed in premises with high humidity due to durability and quality of electrical elements.
CTS-202 should not be installed near water reserviors (pools, taps, etc.).
System phone should not be installed in premises with high dustiness or electromagnetic field intensity.

It is strictly forbidden to instal system phone in following permises::

in permises with direct influence of solar light,
in permises where wibration are very often or strong,
near radio aerials (especially for short waves).

All devices connected to system phone should have certificates of conformity with EU regulations.

Certificate of conformity, proper device disposal

CERTIFICATE OF CONFORMITY
Manufacturer: SLICAN sp. z o.o. ul. M. Konopnickiej 18 85-124 Bydgoszcz	Type: System phone Console	Model: SLICAN CCT-1668
Device description: Access control system SKD and BRV are devices to cooperation with Slican PABXes, they are connected to analogue port. They realize basic doorphone functionality. They enable to establish call between any phone connected to Slican PABX and device installed by door as well as opening electro-lock.
Product fulfiles following EU Directive 99/5/WE R&TTE, it also fulfiles requirements of following harmonized standards: EN 60950-1:2001 + A11:2004; EN 55022:1998 + A1:2000 + A2:2003; EN 55024:1998 + A1:2001 + A2:2003;
Additional information: Current text of certificate of conformity can be downloaded from website www.slican.com Device was tested in typical configuration, while connect to SLICAN PABXes. It fulfiles requirements concerning allowed disturbances level for B class devices. While wrong installation of device, it is assigned to A class and following warning is valid: „This device ia A class product. In normal circumstances it may caused radio disturbances, which required user to undertake proper activity”.
Bydgoszcz, 20-11-2007

↑ If [#Auto dial Auto dial][#Auto dial function is active.]
↑ If protection against pickup, switched on by PABX admin, is no active for this subscriber/account.
↑ Lifting handset or pressing SPK ON key during displaying this information results in establishing call with voice mail.
↑ For adding new entry to the public phone book option Add name appears is subscriber is authorized by PABX admin to add new entry to public phone book.
↑ Option Add to public can be seen if extension number is granted with appropriate privileges by PABX admin.
↑ Call Forwarding
↑ Malicious Call IDentification
↑ First letter of word Voicemail
↑ Access to appropriate phone book or subscriber list is also possible using navigation keys – see chapter .
↑ It is possible to add participant by pressing FLASH key, dialing his/her extension number and pressing key with programmed „Conference” service during established call (or selecting this service from menu available on phone display during call).
↑ The same effect can be achieved by hanging on the handset or pressing SPK OFF key.
↑ This functionality is also available for participants, who do not use CTS-202 phone.
↑ Subscriber to whom you want to transfer custodian function should be equipped in CTS-202 phone.

[ftn1-1] Only if subscriber is authorized to use public phone book (set by PABX admin).

[ftn2-2] CTS-202.IP phone is not equipped in speakerphone loudspeaker.

[ftn3-3] If [#Auto dial Auto dial][#Auto dial function is active.]

[ftn4-4] If protection against pickup, switched on by PABX admin, is no active for this subscriber/account.

[ftn5-5] Lifting handset or pressing SPK ON key during displaying this information results in establishing call with voice mail.

[ftn6-6] For adding new entry to the public phone book option Add name appears is subscriber is authorized by PABX admin to add new entry to public phone book.

[ftn7-7] Option Add to public can be seen if extension number is granted with appropriate privileges by PABX admin.

[ftn8-8] Call Forwarding

[ftn9-9] Malicious Call IDentification

[ftn10-10] First letter of word Voicemail

[ftn11-11] Access to appropriate phone book or subscriber list is also possible using navigation keys – see chapter .

[ftn12-12] It is possible to add participant by pressing FLASH key, dialing his/her extension number and pressing key with programmed „Conference” service during established call (or selecting this service from menu available on phone display during call).

[ftn13-13] The same effect can be achieved by hanging on the handset or pressing SPK OFF key.

[ftn14-14] This functionality is also available for participants, who do not use CTS-202 phone.

[ftn15-15] Subscriber to whom you want to transfer custodian function should be equipped in CTS-202 phone.

[1]

[2]

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

@@ Line 1: / Line 1: @@
-<center>'''Telefony systemowe'''</center>
+<center>'''System phones'''</center>
-<center>'''Slican CTS-202.CL'''</center>
+<center>'''Slican CTS-202'''</center>
-<center>'''Slican CTS-202.BT'''</center>
+<center>'''Slican CTS-202.Plus'''</center>
 <center>'''Slican CTS-202.IP'''</center>
-<center>'''i konsola CTS-232'''</center>
+<center>'''and console CTS-232'''</center>
-<center>Instrukcja instalacji i obsługi</center>
+<center>Installation and manual</center>
-<center>[[Image:Io CTS-CTS z konsolami.png]]</center>
+<center>[[Image:io cts 1.png]]</center>
+<center>Issue 1.10</center>
@@ Line 26: / Line 27: @@
-<center>„Producent zastrzega sobie prawo do wprowadzania zmian w produkcie bez uprzedniego powiadomienia.”</center>
+<center>Manufacturer reserves right to make changes without prior notification.</center>
-<center>Data ostatniej modyfikacji: 1.06.2010 </center>
+<center>Date of last modification:  </center>
-=Wstęp=
-Z myślą o nowej rodzinie central Slican CCT-1668, MAC-6400 i CXS-0424 zaprojektowane zostały telefony systemowe Slican CTS-202.CL, CTS-202.BT i CTS-202.IP, które mogą współpracować z konsolami CTS-232. Telefony CTS-202.CL i CTS-202.BT są cyfrowymi aparatami systemowymi pracującymi na styku U<sub>p0</sub>, natomiast CTS-202.IP jest aparatem systemowym VoIP.
-Zestawienie podstawowych cech funkcjonalnych przedstawia poniższa tabela.
+= Introduction =
+New system phones Slican CTS-202, CTS-202.Plus and CTS-202.IP were designed for PABXes. These phones can work with console CTS-232. Phones CTS-202 and CTS-202.Plus are digital system phones connected to U<sub>po</sub> port, while CTS-202.IP is VoIP system phones.
-{| {{prettytable}}
+Setlement of basic differences in system phones features is presented in following table.
-|
-| <center>Cecha aparatu systemowego</center>
-| <center>CTS-202.CL</center>
-| <center>CTS-202.BT</center>
+{|{{Prettytable}}
-| <center>CTS-202.IP</center>
+!{{Hl2}}|
+!{{Hl2}}| <center>System phone feature</center>
+!{{Hl2}}| <center>CTS-202.CL</center>
+!{{Hl2}}| <center>CTS-202.Plus</center>
+!{{Hl2}}| <center>CTS-202.IP</center>
 |-
 | <center>1.</center>
-| Podświetlany wyświetlacz
+| Backlighted display
-| <center>TAK </center>
+| <center>YES </center>
-| <center>TAK</center>
+| <center>YES</center>
-| <center>TAK</center>
+| <center>YES</center>
 |-
 | <center>2.</center>
-| Wyjście nagrywania AUDIO OUT
+| Recording output AUDIO OUT
-| <center>NIE</center>
+| <center>NO</center>
-| <center>NIE</center>
+| <center>YES</center>
-| <center>TAK</center>
+| <center>YES</center>
 |-
 | <center>3.</center>
-| Wbudowana baza telefonu Bluetooth
+| Included DECT base
-| <center>NIE</center>
+| <center>NO</center>
-| <center>TAK</center>
+| <center>YES</center>
-| <center>NIE</center>
+| <center>NO</center>
 |-
 | <center>4.</center>
-| Zasilacz zewnętrzny
+| External power supply
-| <center>OPCJA</center>
+| <center>OPTION</center>
-| <center>OPCJA</center>
+| <center>STANDARD</center>
-| <center>W STANDARDZIE</center>
+| <center>STANDARD</center>
 |-
 | <center>5.</center>
-| Tryb głośnomówiący
+| Hands free mode
-| <center>TAK</center>
+| <center>YES</center>
-| <center>TAK</center>
+| <center>YES</center>
-| <center>DOSTĘPNY TYLKO W ODSŁUCHU</center>
+| <center>AVAILABLE ONLY WHILE LISTENING</center>
 |-
 | <center>6.</center>
-| Współpraca z konsolami CTS-232
+| Cooperation with console CTS-232
-| <center>TAK</center>
+| <center>YES</center>
-| <center>TAK</center>
+| <center>YES</center>
-| <center>TAK</center>
+| <center>YES</center>
 |-
 | <center>7.</center>
-| Współpraca z aplikacją CTI
+| Cooperation with CTI application
-| <center>TAK</center>
+| <center>YES</center>
-| <center>TAK</center>
+| <center>YES</center>
-| <center>TAK </center>
+| <center>YES </center>
-<center>(pod warunkiem, że telefon zainstalowany jest w tej samej sieci lokalnej co centrala)</center>
+<center>(phone must be installed in the same local area network as PABX)</center>
 |}
-Telefony w wykonaniu CTS-202.CL dostępne są w dwóch wersjach kolorystycznych. Model CTS-202.CL-GR wykonany jest w kolorze szarym, natomiast CTS-202.CL-BK w kolorze czarnym. Do telefonów tych dostępne są konsole w kolorze szarym CTS-232-GR oraz czarnym CTS-232-BK.
+Phone in model CTS-202.CL is available in two colours. Model CTS-202.CL-GR is performed as grey, while CTS-202.CL-BK is performed as black. Consoles are available to the phone – console CTS-232-GR in gray and CTS-232-BK in black.
-Oferowane modele zapewnią wygodną pracę na stanowiskach sekretarskich i w gabinetach menedżerskich. Z pewnością sprawdzą się również w każdej recepcji. Czytelne menu pozwala na intuicyjną zmianę parametrów telefonu i dostosowanie go do osobistych preferencji użytkownika. Pełna integracja programu telefonu z oprogramowaniem centrali pozwala na szybką zmianę ustawień poszczególnych telefonów z poziomu konfiguracji centrali.
+Offered models assured convenient work in secretary and managerial office. There are also adequate for front desk office. Clear menu enables intuitive phone parameters changing and fit it to individual user needs. Full integration phone and PABX firmware enables for quick change of phone settings from ConfigMAN application.
-Wielofunkcyjne przyciski programowalne zapewniają łatwy dostęp do funkcji centrali, numerów wewnętrznych lub wpisów w książkach telefonicznych. Użytkownik telefonu może korzystać z trzech spisów telefonów:
+Multifunctional programable keys assure easy access to PABX features, extension numbers and entries in phone books. User can use three phone books:
-* książki publicznej – dostępnej dla wszystkich abonentów w centrali, zarządzanej globalnie,
+* public phone book – available for all subscribers in PABX, managed globally,
-* książki prywatnej – będącej tylko własnością użytkownika danego telefonu,
+* private phone book – available only for phone user,
-* spisu abonentów – spis abonentów wewnętrznych centrali.
+* extension number list – list of PABX extension numbers.
-Ilość telefonów systemowych, które możemy podłączyć, zależy od rodzaju centrali.Do centrali '''MAC-6400''' możemy podłączyć maksymalnie 128 telefonów systemowych Slican CTS-202.CL lub CTS-202.BT oraz 18 telefonów systemowych CTS-202.IP. Do centrali '''CCT-1668''' możemy podłączyć maksymalnie 18 telefonów systemowych Slican CTS-202.CL lub CTS-202.BT oraz 18 telefonów systemowych CTS-202.IP. Natomiast do centrali CXS-0424 można podłączyć 8 telefonów systemowych Slican CTS-202.CL lub CTS-202.BT oraz 18 telefonów systemowych CTS-202.IP. Do maksymalnie czterech telefonów systemowych, podłączonych do centrali, można podłączyć nie więcej niż pięć konsol CTS-232, natomiast do pozostałych telefonów systemowych można podłączyć nie więcej niż dwie konsole CTS-232. Pozwala to na rozszerzenie liczby klawiszy szybkiego wyboru. Zwiększa też możliwości organizacji ruchu wewnętrznego z podglądem stanu zajętości poszczególnych abonentów.
+Number of system phones, which can be connected to the PABX depends on its type.For '''MAC-6400''' PABX up to 120 system phones Slican CTS-202.CL or CTS-202.Plus and up to 18 system phones CTS-202.IP can be connected. For '''CCT-1668''' PABX, user can connects up to 18 system phones Slican CTS-202.CL or CTS-202.Plus and up to 18 system phones CTS-202.IP. Maximally to four system phones up to 5 consoles can be connected, to remain system phones up to 2 consoles CTS-232 can be connected. This feature enables to increase number of speed acces keys. It also increase possibilities of incoming and oytgoing calls organize together with view of specified subscribers status (free, busy).
-=Funkcjonalność=
+= Features =
-* 12 programowalnych przycisków uniwersalnego przeznaczenia, np. sygnalizacja stanu abonenta, szybkie wybieranie, usługi centralowe, skróty do wpisóww książkach telefonicznych.
-* Każdy przycisk szybkiego wybierania może mieć przypisaną dowolną funkcję centrali.
+* 12 programmable keys ex. extension number status, speed access, PABX services, indexes of entries from phone books.
-* Przyciski obsługi menu: strzałki góra/dół, dwa klawisze kontekstowe.
+* To every speed access key any PABX service can be assigned.
-* Klawisze regulacji +/-.
+* Menu maintenace keys: arrows up/down, two context keys.
-* Przyciski: Flash, SPK ON, SPK OFF, Mute, Redial.
+* Volume keys +/-.
-* Dwie książki telefoniczne: publiczna i prywatna oraz spis numerów wewnętrznych.
+* Keys: Flash, SPK ON, SPK OFF, Mute, Redial.
-* Podręczna pamięć - 10 numerów: wybranych, odebranych, nieodebranych.
+* Two phone books: public and private as well as extension numbers list.
-* Prezentacja numeru abonenta dzwoniącego wraz z nazwą z książki telefonicznej lub bazy danych centrali.
+* Call register - 10 numbers: dialed, received, missed.
-* Prezentacja numeru oczekującego.
+* Call number presentation together with name from phone book or PABX database.
-* Prezentacja numeru wybranego przez inicjatora połączenia.
+* Waiting number presentation.
-* Prezentacja czasu połączenia w trakcie rozmowy.
+* Dialed number presentation.
-* Programowe ustawienia: języka menu, głośności dzwonienia, głośnika i słuchawki oraz kontrastu ekranu LCD.
+* Call time presentation during call.
-* 5 rodzajów dzwonka.
+* Programable settings: polish, english or russian language, ringing volume , loudspeaker and hanset as well as LCD display contrast.
-* Możliwość programowania ustawień telefonu poprzez program do konfiguracji centrali.
+* 5 ringing types.
-* Funkcja AUTO-Redial – automatyczna próba dodzwonienia się do wcześniej zajętego lub nieodbierającego abonenta.
+* Possibility of programing phone settings from PABX configuration application.
-* Cyfrowa transmisja z centralą po 1 parze przewodów po styku U do 1 km.
+* Auto Redial function – automatic attempt of redialing busy or not answered number.
-* Możliwość rozbudowy telefonu o dodatkowe konsole CTS-232 (zwiększenie liczby klawiszy programowalnych od 42 do 162 – patrz Rozdział 1).
+* Digital data transmision via 1 pair of wires from U terminal up to 1 km.
-* Wieloliniowy ekran LCD z dwoma rodzajami czcionki.
+* Possibility of phone extention with additional CTS-232 consoles (extention of programable keys from 42 to 162 see Chapter 1).
-* Wymiana telefonu nie powoduje utraty zapisanych danych
+* Multirows LCD display with two font faces.
-* Współpraca ze słuchawkami nagłownymi.
+* After phone change assigned to it data doesn't loss.
-'''''UWAGA!'' '''
+* cooperation with headphones.
-'''Funkcjonalność telefonu jest ściśle związana z wersją oprogramowania centrali. Opis działania telefonu i dostępne funkcje, opisane w niniejszej instrukcji, dotyczą aktualnie dostępnej wersji oprogramowania. W przypadku braku niektórych funkcji lub innego działania, prosimy o kontakt z naszym serwisem. '''
+'''''ATTENTION!'' '''
-=Wyposażenie=
-{| {{prettytable}}
+''Phone functionality is strictly related with version of PABX firmware. Operating description and available functions, described in following manual concertns current version of PABX firmware. If some functions are missing or working different, please contact with authorized service. ''
-| <center>Akcesoria</center>
-| <center>TelefonCTS-202.CL</center>
-<center>(Ilość w zestawie)</center>
-| <center>Telefon CTS-202.BT</center>
-<center>(Ilość w zestawie)</center>
+= Equipement =
-| <center>TelefonCTS-202.IP</center>
-<center>(Ilość w zestawie)</center>
-| <center>Konsola CTS-232</center>
-<center>(Ilość w zestawie)</center>
+{|{{Prettytable}}
+!{{Hl2}}| <center>Accesories</center>
+!{{Hl2}}| <center>CTS-202 phone</center>
+<center>(pieces in set)</center>
+!{{Hl2}}| <center>CTS-202.Plus phone</center>
+<center>(pieces in set)</center>
+!{{Hl2}}| <center>CTS-202.IP phone</center>
+<center>(pieces in set)</center>
+!{{Hl2}}| <center>CTS-232 console</center>
+<center>(pieces in set)</center>
 |-
-| Telefon
+| Phone
-<center>[[Image:]]</center>
+<center>[[Image:io cts 2.png]]</center>
-| <center>1 szt.</center>
+| <center>1 pcs.</center>
-| <center>1 szt.</center>
+| <center>1 pcs.</center>
-| <center>1 szt.</center>
+| <center>1 pcs.</center>
 | <center>-</center>
 |-
-| Słuchawka
+| Handset
-<center>[[Image:]]</center>
+<center>[[Image:io cts 3.png]]</center>
-| <center>1 szt.</center>
+| <center>1 pcs.</center>
-| <center>1 szt.</center>
+| <center>1 pcs.</center>
-| <center>1 szt.</center>
+| <center>1 pcs.</center>
 | <center>-</center>
 |-
-| Przewód słuchawkowy
+| Handset cord
-<center>[[Image:]]</center>
+<center>[[Image:io cts 4.png]]</center>
-| <center>1 szt.</center>
+| <center>1 pcs.</center>
-| <center>1 szt.</center>
+| <center>1 pcs.</center>
-| <center>1 szt.</center>
+| <center>1 pcs.</center>
 | <center>-</center>
 |-
-| Przewód telefoniczny linii
+| Phone cable
-<center>[[Image:]]</center>
+<center>[[Image:io cts 5.png]]</center>
-| <center>1 szt.</center>
+| <center>1 pcs.</center>
-| <center>1 szt.</center>
+| <center>1 pcs.</center>
 | <center>-</center>
 | <center>-</center>
 |-
-| Zasilacz sieciowy aparatu
+| Phone power supply
-| <center>Opcja dodatkowa</center>
+| <center>Additional</center>
-| <center>Opcja dodatkowa</center>
+<center>option</center>
-| <center>1 szt.</center>
+| <center>1 pcs.</center>
+| <center>1 pcs.</center>
 | <center>-</center>
 |-
-| Konsola
+| Console
-<center>[[Image:]]</center>
+<center>[[Image:io cts 6.png]]</center>
 | <center>-</center>
 | <center>-</center>
 | <center>-</center>
-| <center>1 szt.</center>
+| <center>1 pcs.</center>
 |-
-| Przewód połączeniowykonsola – telefonlub konsola - konsola
+| Connecting cable console-console
-<center>[[Image:]]</center>
+<center>[[Image:io cts 7.png]]</center>
 | <center>-</center>
 | <center>-</center>
 | <center>-</center>
-| <center>1 szt.</center>
+| <center>1 pcs.</center>
 |-
-| Element łączącykonsola – telefonlubkonsola - konsola
+| Joining element console-phone or console-console
-<center>[[Image:]]</center>
+<center>[[Image:io cts 8.png]]</center>
 | <center>-</center>
 | <center>-</center>
 | <center>-</center>
-| <center>1 szt.</center>
+| <center>1 pcs.</center>
 |-
-| Śruby mocujące
+| Fixing screw
-<center>[[Image:]]</center>
+<center>[[Image:io cts 9.png]]</center>
 | <center>-</center>
 | <center>-</center>
 | <center>-</center>
-| <center>4 szt.</center>
+| <center>4 pcs.</center>
 |}
+= Structure =
+== Phone ==
+<center>[[Image:io cts 10.png]]</center>
+{|{{Prettytable}}
+| 1. Display
+| 7. Auto Answer/Mute key
+|-
+| 2. Cradle switch
+| 8. Volume control keys
+|-
+| 3. Menu navigation keys
+| 9. Programable keys with light signaling
+|-
+| 4. Ringing LED
+| 10. Flash key
+|-
+| 5. Loudspeaker
+| 11. Redial key
+|-
+| 6. Keypad
+| 12. Hands Free mode on and off keys (speakerphone)
+|}
+<center>[[Image:io cts 11.png]]</center>
+{|{{Prettytable}}
+| 13. CTS-232console connecting socket
+| 16. Headphones connection socket
+|-
+| 14. POWER socket (for CTS-202 and CTS-202.Plus), socket 36V/0,1A (for CTS-202.IP
+| 17. AUDIO OUT outlet (CTS-202.Plus and CTS-202.IP)
+|-
+| 15. LINE socket
+| 18. Socket for aditional headphones with microphone
+|}
+== Display ==
+{|{{Prettytable}}
+|
+{|{{CTS}}
+|<center>
+ SYSTEM TELEPHONE
+ CTS-202
+ SLICAN 2010
+ Terminal: 1.29
+</center>
+|}
+| Hello screen after switching on PABX and phone (CTS-202.CL and CTS-202.Plus).
+|-
+|
+{|{{CTS}}
+|<center>
+ SYSTEM TELEPHONE
+ CTS-202.IP
+ SLICAN 2007
+ Terminal 0.70
+</center>
+|}
+| Hello screen after switching on PABX and phone (CTS-202.IP).
+|-
+|
+{|{{CTS}}
+|<center>
+  No connection
+ with PABX
+</center>
+|}
+| No PABX connection with VoIP server  – it appear after 30 seconds from PABX switching on, if conection between phone and PABX is not established (CTS-202.CL and CTS-202.Plus). After next 5 seconds phone reset and connection attempt will be performed.
+|-
+|
+{|{{CTS}}
+|<center>
+ Service is
+ temporaily
+   unavailable
+ Please wait
+</center>
+|}
+| This message is displayed while during regular work connection between phone and PABX is interrupted. (CTS-202.CL and CTS-202.Plus)
+|-
+|
+{|{{CTS}}
+|<center>
+ Slican VoIP
+ No PABX
+ connection
+ Check LAN
+ cable
+ Menu      Connect
+</center>
+|}
+| No connection cable error mesage (CTS-202.IP).
+|-
+|
+{|{{CTS}}
+|<center>
+ Slican VoIP
+ No PABX
+ connetion
+ No answer from
+ VoIP Server
+ Menu      Connect
+</center>
+|}
+| No PABX connection with VoIP server error message (CTS-202.IP).
+|-
+|
+{|{{CTS}}
+|<center>
+ Monday
+.05.10     14:41
+ Telephone name
+ Menu      Connect
+</center>
+|}
+| Display in standby mode (all models).
+|-
+|
+{|{{CTS}}
+|
+ Talking to
+ SUBSCRIBER NAME
+:23
+ Menu      Save
+|}
+| Display during call (all models).
+Subscriber name – internal subscriber name or entry in phone book;
+– number, external presented number or extension number;
+:23 – connection time;
+Save – current key function.
+|-
+|
+{|{{CTS}}
+|
+ Training ACD: 10:12
+ Calls:         2/10
+ Wait time:        0
+ Exp. time:        1
+ Missed %:       0/0
+ Agents:        1/12
+ Menu           Book
+|}
+| Preview of ACD group status:
+'''Comment''' for group – max. 10 signs
+'''Calls''' – number of calls waiting in queue / number of calls maintained by agents
+'''Wait. time''' – real waiting time for longest waiting call
+'''Exp. time –''' estimated waiting time, calculated according average call time, number of current waiting calls and number of agents in group / declared waiting time, defining queue excess
+'''Missed %''' - evaluated in percent number of calls missed due to caller surrender / evaluated in percent number of calls refused due to queue excess, calculation based on last 15 minutes
+'''Agentów''' – number of available agents / total number of agents
+|}
+== Console ==
+<center>[[Image:io cts 12.png]]</center>
+<center>[[Image:io cts 13.png]] [[Image:io cts 14.png]]</center>
+. Programmable keys
+. Outlet for second console
+. Socket for connecting phone
+= Connecting CTS phones to PABX =
+== Phisical connecting CTS-202 phones to PABX ==
+''Proper operating of phones CTS-202 and CTS-202.Plus depends on distance between PABX and phone, number of connected consoles and quality of building wiring system.''
+{|{{Prettytable}}
+| <center>1</center>
+| <center>[[Image:io cts 15.png]]</center>
+| Connect handset cord to socket in handset
+|-
+| <center>2</center>
+| <center>[[Image:io cts 16.png]]</center>
+| Second end of handset cord connect to socket assigned as [[Image:io cts sluchawki.png]] on the backside of phone
+|-
+| <center>3</center>
+| <center>[[Image:io cts 17.png]]</center>
+| Connect:
+* phone cable (for CTS-202 and CTS-202.Plus)
+* Ethernet cable (for CTS-202.IP)
+into phone socket assigned as LINE
+|-
+| <center>4</center>
+| <center>[[Image:io cts 18.png]]</center>
+| Opposite end of CTS-202 and CTS-202.Plus cable connect to the socket of phone network.
+For phones CTS-202.IP opposite end of Ethernet cable connect to computer network socket.
+'''''Attention! '''''
+''Before connecting phone contact with network admin to assure, that socket is intended for specified system phone.''
+''Phones can be connected only to sockets allowed to it.''
+|-
+| <center>5</center>
+| <center>[[Image:io cts 19.png]]</center>
+| For system phone CTS-202.IP connect power supply to socket assigned as '''36V/0,1A. '''
+For system phones CTS-202.Plus connect power supply to socket assigned as '''POWER'''.
+'''For both situation opposite end of power cord connect to power socket 230V. '''
+'''''ATTENTION! '''''
+''System phones CTS-202.IP can be also powered from network devices with function Power over Ethernet. In this situation power supply is not needed.''
+|-
+| <center>6</center>
+| <center>[[Image:io cts 20.png]]</center>
+| Proper phone operating is announced by PABX notification on display and signal in handset.
+|}
+Few practical notes for proper CTS-202 and CTS-202.Plus phones installation:
+* Always connect phones using telephone or computer cable with diameter not less than 0.5 mm<sup>2</sup>.
+* Conductors must be connected accordingly.
+* It is not recommended to connect phone and ISDN on common phone cable.
+* Sugested distances phones and PABX are as follows:
+** up to 200m – for phones without power supply, proper phone operating,
+** more than 200m – if You don't use additional power supply improper phone operating may occur,
+** more than 400m – using power supply is obvious for proper phone operating.
+'''''REMEMBER! '''''
+''For system phone CTS-202.Plus always delivered in standard power supply device should be connected. ''
+''For CTS-202.CL power supply decice is delivered as option. If there is long distance between PABX and phone and worse cable quality, problems with phone CTS-202.CL and CTS-202.Plus operating may occur. Solution of these problems is connecting power supply device.''
+== CTS-202.IP configuration for operating with PABX  ==
+=== Phone configuration for operating in LAN network ===
+'''''ATTENTION! '''''
+''Phone CTS-202.IP must be configure in PABX, by admin, to cooperate with PABX. Phone is authorized in PABX using idividual phone MAC address entered in PABX configuration. Individual MAC address for every phone can be find on label located on the bottom side of phone casing. It can be also read in phone menu (VoIP settings status).''
+'''''Example 1 '''''– server DHCP works in LAN network, all network settings are defined automatically.
+CTS-202.IP phone is by default configured to work in LAN network withDHCP server. After connecting to LAN network and power source phone automatically find PABX and connect to it. After connection phone is ready to work.
+'''''Example 2''''' – DHCP server is not used in LAN network, network settings are defined manually.
+Before connecting CTS-202.IP phone to LAN, it preconfiguration should be done. To do it, phone should be connected to 230V power line using power supply. In phone connected to power source only one menu will available – '''VoIP'''.
+{| class="prettytable"
+| '''VoIP'''('''1''')
+|
+|-
+|
+| '''Network settings''' ('''1''')
+|-
+|
+| '''VoIP server''' ('''2''')
+|-
+|
+| '''Status '''('''3''')
+|}
+Using context keys [[Image:io cts prawo.png]] and [[Image:io cts dol.png]] option '''Network settings''' in '''VoIP '''menu should be selected.
+'''Network settings '''–''' '''in this option all settings needed for opereting phone in specified network should be done. Respectively:
+* resign from downloading settings from DHCP server,
+* enter phone IP address,
+* enter subnet mask,
+* enter default gateway address,
+* enter DNS server address.
+After answering '''Yes''' on final phone question '''Set?''' phone restarts and performs initialization process. If '''VoIP''' server address has not been previously defined, phone informs about no connection to PABX.
+To set server VoIP IP address, using left context key [[Image:io cts prawo.png]] select menu '''VoIP.''' Pressing key [[Image:io cts dol.png]] move to option '''VoIP server '''and pressing''' Select '''key''' [[Image:io cts prawo.png]] '''enter to submenu and write address.
+If phone CTS-202.IP is connected to the same local network as PABX, then VoIP server address can be automatically downloaded without neccessity ofmanual entering this address. To do this, menu '''VoIP''' should be selected, and than submenu''' VoIP Server. '''In this submenu an option '''Auto '''should be selected uzing contex key [[Image:io cts prawo.png]].
+IP address or VoIP server name should be defined by LAN or PABX admin.
+<center>
+{|{{CTS}}
+|
+ -Name/IP Address-
+ Auto          Back
+|}
+</center>
+'''Status''' – enables to familiarixe with phone current VoIP settings
+After connecting phone to LAN and establishing connection to PABX, '''VoIP''' menu (position 6) is available and contains following options. Additional submenu '''Codec''' is available.
+{| class="prettytable"
+| '''VoIP'''('''6''')
+|
+|-
+|
+| '''Network settings''' ('''1''')
+|-
+|
+| '''VoIP server''' ('''2''')
+|-
+|
+| '''Codec''' ('''3''')
+|-
+|
+| '''Status '''('''4''')
+|}
+'''Codec''' – this menu enables selection of audio codec which will be used to establish calls. Audio codec selection affect band width needed to establish call. We can select:
+* G.711 – wider band,
+* GSM – narrower band,
+* Auto – codec is selected automatically depending on phone location in LAN network with PABX CCT-1668. If phone is located in the same network, codec G.711 is used, otherwise GSM codec.
+=== Phones configuration for work in WAN network (internet) ===
+'''''ATTENTION1! '''''
+''To force PABX to cooperate with CTS-202.IP, appropriate settings in its configuration should be made by PABX admin. Phone registering in PABX us done using phone MAC address. This number is individual for every phone and can be find on label located on back side of phone casings. It can be also read in phone status menu (VoIP settings status).''
+'''''ATTENTION2! '''''
+''Phone using port 5522.''
+Before connecting CTS-202.IP phone to WAN network (internet) phone preconfiguration should be done. To do it, phone should be connected to 230V power lineusing power supply. In phone connected to power source only one menu will available – '''VoIP'''.
+{| class="prettytable}"
+| '''VoIP'''('''1''')
+|
+|-
+|
+| '''Network settings''' ('''1''')
+|-
+|
+| '''VoIP server''' ('''2''')
+|-
+|
+| '''Status '''('''3''')
+|}
+To enter settings You should use left context key [[Image:io cts prawo.png]] '''Menu''' and than select '''VoIP menu VoIP.''' After pressing key '''Select [[Image:io cts prawo.png]] '''You can set necessarily network settings. Menu can be scrolled by key [[Image:io cts dol.png]] .
+'''Network settings '''–''' '''in this menu phone network settings should be set. First should be decided if settings will be downloaded from DHCP server. If no, following data should be entered:
+* phone IP address
+* subnet mask
+* default gateway address
+* DNS server address
+'''VoIP server''' – in this menu You should enter VoIP server IP address (or name), that means PABX CCT-1668 address.
+'''Status''' – in this menu current VoIP phone settings can be displayed.
+After connecting phone to WAN network (internet) and conecting to PABX, '''VoIP''' menu (position 6) is available and contains following options. Additional submenu '''Codec''' is available.
+{| class="prettytable}"
+| '''VoIP'''('''6''')
+|
+|-
+|
+| '''Network settings''' ('''1''')
+|-
+|
+| '''VoIP server''' ('''2''')
+|-
+|
+| '''Codec''' ('''3''')
+|-
+|
+| '''Status '''('''4''')
+|}
+'''Codec''' – this menu enables selection of audio codec which will be used to establish calls. Audio codec selection affect band width needed to establish call. We can select:
+* G.711 – wider band,
+* GSM – narrower band,
+* Auto – codec is selected automatically depending on phone location in LAN network with PABX CCT-1668. If phone is located in the same network, codec G.711 is used, otherwise GSM codec.
+=== Error messages and solving problems with connecting phones CTS-202.IP to PABX ===
+'''Message text on displayWhat should be done?'''
+{|{{Prettytable}}
+| ''Set VoIP server parameters''
+| Valid IP address or name of VoIP server (PABX) should be entered.
+|-
+| ''Set LAN network parameters''
+| Switch on network settings downloading from DHCP server or enter these settings manually.
+|-
+| ''Check power cord ''
+| No power. Check power cord.
+|-
+| ''No PABX''
+| Automatic PABX search is enabled in phone – PABX can't be found in network,where phone working in. Enter PABX IP address (VoIP server) manualy and check phone configuration.
+|-
+| ''No answer from DNS server''
+| Connection to DNS server can't be established.
+|-
+| ''No answer from VoIP server''
+| Connection to PABX can't be estasblished. Following reasons are possible: phone network settings or PABX IP address are incorectly defined, PABX is switched off.
+|-
+| ''No answer from DHCP server ''
+| DHCP server can't be found in LAN network. Contact with network admin.
+|-
+| ''Connection to server established - waiting for authorization''
+| Your phone is properly configured and connection to PABX is established. You have no rights to using phone connected to PABX. Contact with PABX admin.
+|-
+| ''Invalid VoIP server name''
+| Invalid PABX name entered. PABX name cann't be found on DNS server.
+|}
+== Connecting CTS-232 console ==
+{|{{Prettytable}}
+| <center>1</center>
+| [[Image:io cts 21.png]]
+| Screw on joining element to console, using fixing bolt included in delivery scope and screw on joining element to phone, using fixing bolt included in delivery scope
+|-
+| <center>2</center>
+| [[Image:io cts 22.png]]
+| Plug connecting cable into console socket assigned as IN and plug second end of connecting cable into phone socket assigned as CONSOLE
+|-
+| <center>3</center>
+|
+{|{{CTS}}
+|
+ Key F16
+        Free
+ Change          Back
+|}
+| Check console - after pressing any key on console, its number should be displayed on phone screen.
+|}
+== Connection of headphones and external microphone ==
+<center>[[Image:io cts calosc.png]]</center>
+Headphones or phones with microphone – usually used in computers - can be connected to the phone.
+.Plug headphones cable terminal into socket assigned as [[Image:io cts sluchawki.png]]
+.Plug external microphone cable terminal into socket assigned as [[Image:io cts mikro.png]]
+'''''Attention! '''''
+''Microphone and headphones grounds should be separated. ''
+'''''Remember! '''''
+''Headphones maintaining mode is set automatically in phones CTS-202.CL and CTS-202.Plus after connecting headphones. It is announced by letter „H” displayed on screen. In phones CTS-202.IP headphones should be switched on using phone menu. It is possible to assign switch on/off option to programmed key (see chapter).''
+== Connecting CTS-202.Plus and CTS-202.IP phonesto external call recording system ==
+Phones CTS-202.Plus are prepared for cooperation with external calls recording system. Terminal (RJ-11) AUDIO OUT located in phone casing is used to connect phone to recorder:
+<center>
+{|{{prettytable}}
+!{{Hl1}}| ''Terminal''
+!{{Hl1}}| ''Meaning''
+|rowspan="7" |[[Image:io cts-202 RJ11-6styków.png]]
+|-
+| 1
+| Not connected
+|-
+| 2
+| '''''STERa''' ''recorder controll
+|-
+| 3
+| '''''VOICEa''''' analogue signal from phone
+|-
+| 4
+| '''''VOICEb''' ''analogue signal from phone
+|-
+| 5
+| '''''STERb''' ''recorder controll
+|-
+| 6
+| Not connected
+|}
+</center>
+Analogue signal from phone is tranfered on middle wires of AUDIO OUT terminal – VOICEa, VOICEb.
+Wires STERa, STERb are used to switching on and off recording. „Shorting” status (resistance ca. 35) can be observed since lift handset (switching on speakerphone), till hang up handset (switching off speakerphone).
+Audio and control signal polatrity is meaningless.
+Output control parameters (AUDIO OUT):
+{|{{Prettytable}}
+| max. striking current:
+| 100 mA
+| continous
+|-
+| max. connected voltage:
+| 200 V
+| peak
+|-
+| Cut off current:
+| <nowiki><1 mA</nowiki>
+| for voltage 200 V
+|-
+| output capacity:
+| 25 pF
+| for signal 50 V; f=1 MHz
+|}
+'''''ATTENTION: '''''
+''While using TelephoneCTI.Plus application, AUDIO OUT socket in system phones CTS-202.Plus and CTS-202.IP is intended to direct phone connecting to linear or microphone input on computer audio card.''
+= Phone settings =
+{|{{Prettytable}}
+| '''Ringing tone'''
+| Up to five phone ringing tone are available for selection.
+|-
+| '''Ringing volume'''
+| This function enables to select up to seven levels of ringing signal volume or switch off ringing.
+|-
+| '''Contrast'''
+| Settings of optimal visibility of signs on LCD display.
+|-
+| '''Language'''
+| System phone enables displaying messages in three languages: polish, english and russian. Polish language is set as default.
+|-
+| '''Auto answer'''
+| Phone enables automatic answering calls without user activity by switching on speakerphone or headset. Connection is interrupted in 5 seconds after hanging up handset by caller. Połączenie zostaje rozłączone po 5 sekundach od odłożenia słuchawki przez inicjatora.
+|-
+| '''Auto dial'''
+| Automatic number dialing after short pressing programmable key (circa 1 second) if for this key internal number or index from phone book is programmed, without wating for lifting handset.
+|-
+| '''Volume'''
+'''(Amplification)'''
+| '''Sp-ph power''' - Speakerphone or headset (if connected and turn-on) volume tunning.
+'''Handset power''' - Handset volume tunning.
+|-
+| '''Own number'''
+| Preview of phone number assigned to phone.
+|-
+| '''Outgoing digit'''
+| Programm outgoing digit which will be necessarily for establish outgoing calls (usually 0). This settings is necessarily for appropriate dialing and redialing numbers from phone book.
+|-
+| '''Headphones'''
+| Enables switch on/off connected headphones. If headphones are switched on, after pressing '''SPK ON''' key all audio signals can be hear in headphones instead of speakerphone.
+|-
+| '''Phone name'''
+| This option enables assigning phone name (ex. Trade Dept.) visible on display in standby mode.
+|-
+| '''Factory settings'''
+| This function deletes all settings made by user. It should be remember, that this function deletes also all numbers from private phone book and numbers programmed for keys.
+|-
+| '''Software version'''
+| This option shows phone firmware version.
+|}
+= Phone maintenance =
+== Phone menu (navigation through phone menu) ==
+Navigation through phone menu can be done by keys located in upper part of keypad, below display.
+<center>[[Image:io cts prawo.png]][[Image:io cts lewo.png]]</center>
+<center>[[Image:io cts gora.png]]</center>
+<center>[[Image:io cts dol.png]]</center>
+Function of each key is displayed on phone and depends on menu position
+{|{{Prettytable}}
+| <center>[[Image:io cts prawo.png]]</center>
+| Key functions depend on context:
+* '''Menu'''
+* '''Select'''
+* '''Change'''
+* '''Save'''
+Current key function is displayed on the left side over the key.
+|-
+| <center>[[Image:io cts lewo.png]]</center>
+| Key functions depend on context:
+* '''Book'''
+* '''Back'''
+* '''Exit'''
+Current key function is displayed on the right side over the key.
+|-
+| <center>[[Image:io cts gora.png]]</center>
+| * Scrolling up
+* After pressing this key in phone stanby mode:
+* 1 time – opening private phone book,
+* 2 times – opening publik phone book<ref name="ftn1">Only if subscriber is authorized to use public phone book (set by PABX admin). </ref>.
+|-
+| <center>[[Image:io cts dol.png]]</center>
+| * Scrolling down
+* After pressing this key in phone standby mode, list of extension numbers is displayed.
+|}
+== Quick return to main screen ==
+It is possible to return to main screen from any place of phone menu system (ex.: when You want to look at caller number). To do this You must press '''''SPK OFF''''' key.
+== Function keys ==
+Phone is equiped in function keys, which realize functions programmed by manufacturer
+{|{{Prettytable}}
+| [[Image:io cts flash.png]]
+| Flash
+| FLASH signal (holding on established call) for selecting PABX services or dialing another extension number during call. In standby mode, after pressing this key option '''Menu >> Services '''is selected.
+|-
+| [[Image:io cts redial.png]]
+| Redial
+| By pressing this key in standby mode Ypu can select:* 1 time – list of lastly dialed numbers,
+* 2 times – list of answered calls,
+* 3 times – list of missed calls.
+|-
+| [[Image:io cts spk on.png]]
+| SPK ON
+| * Switching on Hands Free mode.
+* Pressing this key during ringing,answering call.
+* Start "cold" number dialing (without lifting handset).
+|-
+| [[Image:io cts spk off.png]]
+| SPK OFF
+| * Switching off Hands Free mode or disconnecting if You have lifted handset.
+* During rtinging it causes refuse call.
+* Immediate return to phone main screen if You are in any menu.
+* If there are missed call it is possible to delete them without viewing details.
+|-
+| [[Image:io cts mute.png]]
+| Mute
+| * Switching off microphone in handset or Hands Free mode (internal or external microphone)<ref name="ftn2">''CTS-202.IP'' phone is not equipped in speakerphone loudspeaker.</ref>. Next pressing this key switching microphone on.
+* It there is an ACD group in PABX, this key can be used to preview status of ACD group. Only one condition is appropriate configuration of CTS display in ConfigMAN application, it should be done during PABX installation. Number of waiting calls, number of currently serviced calls, current waiting time, average call time, number of available agents, etc can be displayed on phone screen.
+|-
+| [[Image:io cts regulation-.png]]
+| Regulation button
+| * During standby mode as well as during call decrease ringer volume.
+* During dialing and after establishing call, decrease handset loudness, speakerphone loudness or loudness in headseds if used.
+* Its used to regulation in options '''Menu >> Settings >> Amplification >> Sp-ph power / Handset power'''
+|-
+| [[Image:io cts regulation+.png]]
+| Regulation button
+| * During standby mode as well as during call increase ringer volume.
+* During dialing and after establishing call, increase handset loudness, speakerphone loudness or loudness in headseds if used.
+* '''Its used to regulation in options Menu >> Settings >> Amplification >> Sp-ph power / Handset power.'''
+|}
+== Menu structure ==
+{| class="prettytable"
+| Call register ('''1''')
+|
+|-
+|
+| MIssed calls ('''1''')
+|-
+|
+| Received calls('''2''')
+|-
+|
+| Dialed numbers ('''3''')
+|-
+|
+| Erase last call ('''4''')
+|-
+|
+| Last call time ('''5''')
+|-
+|
+| Last call cost ('''6''')
+|-
+| Program keys('''2''')
+|
+|-
+|
+| Press a key
+|-
+|
+| Set default
+|-
+| Services ('''3''')
+|
+|-
+|
+| Call forward. ('''1''')
+|-
+|
+| Don't disturb ('''2''')
+|-
+|
+| Urgent call ('''3''')
+|-
+|
+| Phone lock ('''4''')
+|-
+|
+| Temporarily CLIR ('''5''')
+|-
+|
+| Park ('''6''')
+|-
+|
+| 3PTY ('''7''')
+|-
+|
+| Fixed account('''8''')
+|-
+|
+| Urgent ringing ('''9''')
+|-
+|
+| Call intercept. ('''10''')
+|-
+|
+| Private call ('''11''')
+|-
+|
+| Working mode ('''12''')
+|-
+|
+| MCID ('''13''')
+|-
+|
+| Voicemail ('''14''')
+|-
+|
+| Conference ('''15''')
+|}
+{| class="prettytable"
+| Settings ('''4''')
+|
+|-
+|
+| Ringing tone ('''1''')
+|-
+|
+| Ringing volume ('''2''')
+|-
+|
+| Contrast ('''3''')
+|-
+|
+| Language ('''4''')
+|-
+|
+| Auto answer ('''5''')
+|-
+|
+| Auto dial ('''6''')
+|-
+|
+| Amplification ('''7''')
+|-
+|
+| Own number ('''8''')
+|-
+|
+| Outgoing digit ('''9''')
+|-
+|
+| Headphones ('''10''')
+|-
+|
+| Telephone name ('''11''')
+|-
+|
+| Factory settings ('''12''')
+|-
+|
+| Program version ('''13''')
+|-
+| DECT ('''5''') <nowiki>*</nowiki>
+|
+|-
+|
+| Registering ('''1''')
+|-
+|
+| Remove handset ('''2''')
+|-
+|
+| Status ('''3''')
+|}
+{| class="prettytable"
+| VoIP ('''5''')<nowiki>**</nowiki>
+|
+|-
+|
+| Network settings ('''1''')
+|-
+|
+| VoIP server ('''2''')
+|-
+|
+| Codec ('''3''')
+|-
+|
+| Status''' '''('''4''')
+|}
+<nowiki>*</nowiki> - menu available only in CTS-202.Plus phones
+<nowiki>** </nowiki>- menu available only in CTS-202.IP phones
+== Quick moving through menu ==
+To quick move to selected menu option, it is possible to use method of quick moving through menu.
+.Press '''Menu '''key'''.'''
+.Select from keypad number of option you want to select, ex. if you want to select option '''Settings >> Own number''', select digit 4, and next 8.
+= Receiving and finishing call =
+.Incoming call is signaling by mean of ringing, flashing LEDs on phone and showing of number or name of caller on phone display.
+.If You want to reject call, press '''SPK OFF '''key or left context key '''Details''', and next select option '''Reject'''. In such situation, call is stored in '''Received calls''' list.
+.If You want to mute incomming call ringing, press key''' Mute'''. After hanging on the handset by caller, call is stored in '''Received calls''' list.
+.To answer call lift the handset, or if you want to activate Hands Free mode, press '''SPK ON '''key.
+.After establishing connection start talking.
+.To finish call hang up handset or press '''SPK OFF''' key.
+= Dialing number from phone keypad =
+== "Hot" number dialing ==
+{|{{Prettytable}}
+| <center>1</center>
+| Lift handset or press '''SPK ON''' key.
+|-
+| <center>2</center>
+| Dial required number.
+|-
+| <center>3</center>
+| After establishing call, start talking.
+|-
+| <center>4</center>
+| To finish call, hang up handset or press '''SPK OFF''' key.
+|}
+'''After lift handset, phone wait 15 seconds for number dialing '''('''from phone book or keypad''')'''. After this time PABX stay unavailable.'''
+== "Cold" number dialing ==
+{|{{Prettytable}}
+| <center>1</center>
+| Dial required number
+|-
+| <center>2</center>
+| Lift handset or press''' SPK ON''' key.
+|-
+| <center>3</center>
+| After establishing call, start talking.
+|-
+| <center>4</center>
+| To finish call, hang up handset or press''' SPK OFF''' key.
+|}
+= Dialing numbers from lists =
+== Redial ==
+.Press '''REDIAL''' key. On phone display last dialed number appear (it is first entry in dialed number list, this list can be scrolled using [[Image:io cts gora.png]] / [[Image:io cts dol.png]] keys).
+.Lift handset or press''' SPK ON''' key.
+.After establishing call, start talking.
+.To finish call, hang up handset or press''' SPK OFF''' key.
+== Selecting extension number from subscriber list. ==
+.In standby mode press [[Image:]] key (arrow down).
+.Press appropriate key to select starting letter of required phone book entry.
+.Scroll subscriber list until required entry is displayed.
+.Lift handset or press''' SPK ON''' key.
+=== Extension number presentation status ===
+If You select subscriber or group from extension number list, its status is presented on phone display. Group is busy if all phones in group are busy.  Subscriber without comment is not displayed in subscriber list. Selecting left context key '''Change'' '''''during''''' '''''subscriber list review results in selecting option of assigning this subscriber to speed access key.
+== Call history (Call register) ==
+Call register is list of last calls for this phone
+Calls are remembered in following categories:
+* Missed calls,
+* Received calls,
+* Dialed numbers.
+To establish call with number from call register:
+.Select key '''Menu >>Call register >> Missed calls, Received calls '''or''' Dialed numbers'''.
+.Select number you want to dial.
+.Lift handset or press''' SPK ON''' key.
+= Using speed access keys =
+Speed access keys are programmable keys with LED signaling. They are located in column on the right side of system phones CTS202.CL, CTS202.Plus, CTS-202.IP and consoles connecting to them.
+<center>[[Image:io cts all.png]]</center>
+Programming possibility means, that user for each key can assign one off following function:
+* External number (subscriber, accout or group),
+* Entry index (entry in private or public phone book),
+* Service,
+* Function,
+* Line (trunk or trunk group status signaling, possible to programm by PABX admin).<br/>
+If key is not programmed, LED near this key is continously turned off and after pressing this key information about no function assigned to this key is displayed on screen.
+<center>
+{|{{CTS}}
+|
+ Key  (F8)
+    Free
+ Change    Back
+|}
+</center>
+Next in this chapter You find descriptions how to programm and use speed access keys as well as how to interpret key LED signaling. As '''long key pressing''' You should mean pressing key and its holding about 3 seconds until activate function assigned to this key.
+== Programming speed access keys ==
+{|{{Prettytable}}
+| <center>1</center>
+| <center>[[Image:io cts fragment.png]]</center>
+| Press selected programmed key on phone or console.
+|-
+| <center>2</center>
+| <center>Change</center>
+<center>[[Image:io cts prawo.png]]</center>
+| Press '''''Change '''''key.
+|-
+| <center>3</center>
+| <center>[[Image:io cts gora.png]]</center>
+<center>or</center>
+<center>[[Image:io cts dol.png]]</center>
+| Select category which should be assigned to this key:
+* '''Extension number'''(subscriber, accout or group),
+* '''Phone book''' (entry in private or public phone book),
+* '''Service''',
+* '''Function'''
+and press context key '''''Select'''''.
+After selecting category define extension number, phone book entry, service or function which should be assigned to this key.
+|-
+| <center>4</center>
+| <center>Zapisz</center>
+<center>[[Image:io cts prawo.png]]</center>
+| Confirm selected entry.
+|}
+Speed access keys can be also programmed by selecting – '''''Menu / Program keys / Select a key'''''.
+Assigning trunk or trunk group to the speed access key can be done only by PABX admin.
+== Speed access keys – subscribers and accounts ==
+Key LED meaning
+Extension number or account can be assigned to speed access keys. Key LED of programmed key with extension number or account assignment :
+* '''is turned off''' – subscriber/account is available,
+* '''shine continously''' – subscriber/account is currently busy,
+* '''blink evenly''' – subscriber/account is called,
+* '''blink unevenly''' – with different frequency than above, short blink inform that account is not recalled on any phone or DND service is active for subscriber.
+'''''ATTENTION!'''''
+For account LED signaling is realized for both - account and extension number where account is recalled.
+----
+<references/>
+Using a key
+* After short pressing key with assigned subscriber/account number, information about this extension number is displayed on phone screen <ref name="ftn3">If [#Auto dial Auto dial][#Auto dial  function is active.]</ref>.
+* After long pressing key with assigned subscriber/account number, if this extension number is free, causes dialing to this extension number. If service '''''Urgent ringing'''''is activate on caller extension number, dialed extension number ringing specially (for analogue phone) or call is routed on speakerpone (for CTS system phone).
+* After long pressing key with assigned subscriber/account number, if this extension number is actually called, causes interception of this call <ref name="ftn4">If protection against pickup, switched on by PABX admin, is no active for this subscriber/account.</ref>.
+== Speed access keys – groups ==
+Key LED meaning
+Group can be assigned to speed access key. LED for key with group assigned:
+* '''is turned off''' – if nobody call group number and maximal group capacity isn't reached,
+* '''shine continously''' – if maximal group capacity is reached,
+* '''blink evenly''' – if anybody call group or waiting for group call establishing
+Using a key
+* ''After short pressing key'' with assigned group results with displaying info about this group on phone screen, specially about: '''number of call waiting in queue/number of busy group agents/group capacity'''. After every short pressing the same key next waiting call is presented on phone display, if there are any. If nobody wait in queque, lifting handset after short pressing key results in dialing group extension number. If there are calls in queue, any call can be intercepted by lifting handset when this call is presented on phone display.
+* If there is no waiting calls in queue fo specified group,'' long pressing key ''with assigned this group results with dialing this group number. If there are waiting calls in queue for group to put Yourself in queue, You must lift handset or press '''SPK ON''' key and dial group number.
+'''''ATTENTION! '''''
+''For conference group, in standby mode and during ringing, pressing key with assigned conference group information about group is not presented, it is not possible to preview or intercept calls.''
+== Speed access keys – phone book entries and services ==
+Key LED meaning
+Phone book entry or service (ex. DND or call forwarding) can be assigned to speed access key. If phone book entry is assigned to programmed key, key LED is '''turned off for a whole time'''.Key LED with assigned service (excluding Voice mai service):
+* '''is turned off''' – if service is inactive,
+* '''shine continously''' – if service is active.
+Using a key
+* After short pressing key with assigned service, causes activation of service and displaying confirmation message on phone screen. Next short pressing this key deactivate service.
+* After short pressing key with assigned phone book entry, causes displaying this entry on phone screen.
+* After long pressing key with assigned phone book entry, causes start dialing assigned number.
+LED meaning for individual/group voice mail
+LED near the key with assigned Voice mail service or extension number of public voice mail box:
+* '''is turned of''' – no any messages (voice mail box subscriber/public is empty),
+* '''blink slowly '''(shining/pause: 1s/1s) – new message(s),
+* '''shine continously''' – there are saved message(s) in voice mail box,
+* '''blink quickly '''(shining/pause: 0,5s/0,5s) – subscriber/public voice mail box is full.
+Using key with individual/group voice mail box assigned
+* After short key pressing voice mail box extension number is displayed <nowiki>(similarly like for key with assigned subscriber) and info about voice mail messages [number of new (not listened) messages/number of all messages]</nowiki><ref name="ftn5">Lifting handset or pressing '''SPK ON''' key during displaying this information results in establishing call with voice mail.</ref>.
+* After long pressing key with assigned Voicemail service, this service is activated and appropriate message is displayed on phone display. After next long pressing this key, service is deactivated.
+* After long pressing key with assigned group voice mail box extension number, call with this number is established.
+== Speed access keys - functions ==
+Following functions can be assigned to speed access key:
+# '''Private book''' – access to entries in private phone book (shortcut to first option in menu '''''Book'''''),
+# '''Public book''' – access to entries in public phone book (shortcut to second option in menu '''''Book)''''',
+# '''Search''' – searching name in private and public phone books (shortcut to third option in menu '''''Book'''''),
+# '''Headphones''' – switching on/off headphones (alternative for selecting option '''Menu >> Settings >> Headphones >> Turned on/Turned off'''),
+# '''Auto answer''' - switching on/off [#Auto answer Auto answer] option (alternative for selecting option '''Menu >> Settings >> Auto answer >> Yes/No''').
+LED meaning
+If functions '''1÷3 '''are assigned to the key, signaling LED near this key is '''continously turned off'''.
+Signaling LED near the key with assigned function '''4''':
+* '''is turned of''' – headphones are turned off,
+* '''shine continously''' – headphones are turned on (additionally letter '''H '''can be seen on phone display).
+Signaling LED near the key with assigned function '''5''':
+* '''is turned of''' – automatic call aswering is inactive,
+* '''shine continously''' – automatic call aswering is active (additionally letter '''A '''can be seen on phone display).
+Using key
+* After short pressing key with assigned function '''1÷3''' appropriate option of '''''Book '''''menu is displayed.
+* After short pressing key with assigned function '''4''' or '''5''' function is activated and appropriate letter is displayed on phone display – this letter confirms activation. Next short pressing of this key deactivate function.
+== Speed access keys – lines ==
+Specified lines can be assigned to keys. Line is common name of trunks and trunk groups.
+'''''ATTENTION! '''''
+''Assigning lines to speed access keys can be done only by PABX admin from inside ConfigMAN application. It cannot be done using phone. ''
+LED meaning
+If LED near speed access key with assigned line:
+* '''is turned of''' – line is free,
+* '''shine continously''' – line is busy,
+* '''blink quickly''' (0,5sec. / 0,5sec.) – line is damaged,
+* '''blink slowly''' (1sec. / 1sec.) – line is dialed.
+Using key
+* Short pressing key with assigned line results in displaying on phone display information about line, especially its name and bussyness.
+* Long pressing key results in line reservation to use it for call you want to dial. To establish such call, after reservation handset should be lifted or SPK ON key pressed and dial required number.
+* LIfting handset during review of dialed line results in call interception.
+== Conveniences concerning speed access keys ==
+=== Preview and change of programmed key ===
+If you want to review what is assigned with speed access key –press '''''Menu''''' key in phone standby mode,''''' '''''and next speed access key which you want to check. Info about selected speed access key is displayed on phone display. Changing function assigned to speed sccess key is possible in this situation after pressing context key '''''Change'''''.
+=== Call interception ===
+If you have an extension number assigned to speed access key, interception of calls to this number is possible if you authorized to do this. If extension number is dialed, to intercept call it is enough to press and hold speedc access key during circa 3 sweconds, call is interceted by your phone.
+=== Call transfer without answering call ===
+It is possible to transfer call to another subscriber or individual/group voice mail without answering it. To do this, you should while ringing press and hold key with assigned subscriber or voice mail box.
+'''''ATTENTION!'''''
+''If appropriate privileges are not set this subscriber, call transfer can't be realized.''
+Call can be transfered to selected subscriber or group from extension number list. To do this, you should:
+'''''First method'''''
+.During incomming call ringing, if you want to transfer call without answering this call, press key [[Image:io cts dol.png]] (arrow down – entering into '''Extension numbers list''').
+.Select subscriber you want to transfer to (you can use quick searching in '''Extension numbers list''').
+.Press context key [[Image:io cts prawo.png]] '''''Details'''''.
+'''''Second method'''''
+.During incoming call ringing, if you want to transfer call without answering this call, press context key [[Image:io cts prawo.png]] '''''Details'''''.
+.Select option '''Transfer'''.
+.Enter extension numbrer you want to transfer to or press [[Image:io cts dol.png]] key and select its name.
+.Press context key [[Image:io cts prawo.png]] '''''Divert'''''.
+=== Urgent ringing ===
+If extension number is assigned to speed access key, to dial this number with '''''Urgent '''ringing ''service, key must be pressed and holded for 3 seconds.
+'''''ATTENTION! '''''
+''Availability of „Urgent ringing” service depends on extension number privileges. If subscriber isn't authorized to use this service, dialed number is alarmed by regular ringing.''
+''Description of another method of using „Urgent ringing” service can be found in chapter 2.4.''
+=== Programmed keys list ===
+In menu '''Program keys''' status of phone speed access keys can be reviewed.
+.After selecting menu option '''Program keys''' press key [[Image:io cts prawo.png]] '''''List'''''.
+.By pressing keys '''Up/Down''', you can move between list entries. Additionally LED near currently reviewed key is light up.
+.Pressing '''''Change''''' key results in entry into programming menu.
+= Phone book =
+Following phone books are available using CTS phone:
+* '''''Private phone book '''''– phone book with entries available are only for this phone,
+* '''''Public phone book''''' – phone book with entries available are for all PABX users,
+* '''''Extension number list''''' – list of all extension numbers in PABX.
+Extension number list is updated by PABX admin and can'y be changed by subscriber. Phone books are stored in PABX and there is no possibility to loss phone book if phone is changed or damaged.
+== Searching entries in phone book (public and private) ==
+.Press''' ''Book '''''key.
+.Select option '''Search'''.
+.Enter searching name fragment and next press context key '''''Search'''''.
+== Saving data to phone book ==
+=== Adding new entry to phone book ===
+'''''First method'''''
+.Pess '''''Book'' '''key.
+.Select phone book you want to add new entry ('''''Private book''''' or '''''Public book''''').
+.Press context key '''''Details''''', and next select option '''''Add name''<ref name="ftn6">'''For adding new entry to the public phone book option Add name appears is subscriber is authorized by PABX admin to add new entry to public phone book.'''</ref>.
+.Enter name to save phone number.
+.Press context key '''''Number'''''.
+.Enter number you want to save in selected phone book.
+.Confirm entry by pressing context key '''''Save'''''.
+'''''Second method'''''
+.Press '''''Book'' '''key.
+.Select option '''''Add to private'' '''or '''''Add to public''<ref name="ftn7">'''Option ''Add to public'' can be seen if extension number is granted with appropriate privileges by PABX admin. '''</ref>
+.Enter name to save phone number.
+.Press context key '''''Number'''''.
+.Enter number you want to save in selected phone book.
+.Confirm entry by pressing context key '''''Save'''''.
+=== Saving number during call ===
+During call, if interlocutor presented yourself with his(her) phone number, this number can be stored in phone book.
+.Press key '''''Details'''''.
+.Select option '''''Book'''''.
+.Select option '''''Add to private'' '''or '''''Add to public'''''
+.Enter name to save phone number, and press '''''Number''''' key.
+.Confirm entry by pressing context key '''''Save'''''.
+=== Entry from call history ===
+.Press context key '''''Menu''''' and select '''''Call register''' ''key.
+.Select appropriate call from call history.
+.Press context key '''''Details''''' while appropriate call is visible on phone display.
+.Select option '''''Add to private '''''or '''''Add to public'''''.
+.Enter name and confirm it by pressing context key '''''Save'''''.
+== Entries operations ==
+=== Edition ===
+Entries edition in public phone book can be done if appropriate privileges are assigned to subscriber extension number. Otherwise, edition of entries in private phone book is not limited by any privileges assigned to subscriber extension number.
+.In standby mode press context key '''''Book'''''.
+.Select phone book to edit entry.
+.Find entry to edit.
+.Press key '''''Details'' '''and select '''Edit '''option. Number or comment can be edited.
+.Confirm changes by pressing '''''Save''''' key.
+=== Copying between phone books ===
+Copying entries between public and private phone book can be done if privileges to edit and save entries in public phone book are assigned to subscriber extension number.
+.In standby mode press context key '''''Book'''''.
+.Select phone book to copy entry. After selection confirmation you can start searching entry to copy.
+.Find entry to copy between phone books.
+.Press '''''Details'' '''key and select option '''Copy'''. Accept it.
+=== Moving between phone books ===
+Moving entries between public and private phone book can be done if privileges to store in public phone.
+.In standby mode press context key '''''Book'''''.
+.Select phone book, you want to move entry from. After selection confirmation you can start searching entry to copy.
+.Find entry to move between phone books.
+.Press '''''Details'' '''key and select option '''Move'''. Accept it.
+=== Erasing entry from phone book. ===
+Erasing entries in public phone book is only available for subscriber with appropriate privileges assigned to his/her extension number.
+.Press '''Book '''key. Select option '''Search'''.
+.Enter from keypad first letters of name you want to erase.
+.If entry displayed on LCD is not entry you want to erase, you can move to requested entry using phone up/down keys.
+.Press '''''Details'' '''key and select option '''Erase'''. Accept it.
+=== Assigning speed access key to programmed key ===
+If specyfied entry is often used (you often dial number entered in one of phone books), it is reasonable to assign this entry to speed access key. Using such programmed key is described in chapter 1Speed access keys – phone book entries and services.
+.In standby mode press context key '''''Book'''''.
+.Select phone book, from which you want to select entry to assign to speed access key. After selection confirmation you can start searching entry to copy.
+.Find entry you want to programm.
+.Press context key '''''Details'' '''and select option '''Assign key'''.
+.Press speed access key to assign entry.
+.Accept selection by pressing '''''Save'''''.
+= Services =
+Every service supported by PABX can be obtained from keypad of system phone after lifting handset.
+Description of all PABX services and their selection method are included in instruction manuals for Slican CCT-1668.S, L, EU or Slican MAC-6400. Below You can find method of selecting services using phone menu.
+To improve selecting services on system phone they can be assigned to programmable keys.
+== Transfering call ==
+.Currently established call, both internal or external can be transfered to any number in PABX or outside PABX, if extension number, where do You want to do it, is granted with appropriate privileges.
+.To do this press '''FLASH''' key.
+.Dial number You want to transfer call to.
+.If You transfer call with announcement, please wait until somebody lift hanset of phone where You want to transfer it. If You don't want to announce call, hang up handset immediatelly.
+'''ATTENTION!''' To return to waiting subscriber, press '''FLASH '''key twice. If You want to transfer call further, above procedure should be repeated from point 2
+.If You hang up handset, PABX establish transfered call.
+== Do not disturb – DND service ==
+„Do not disturb” service lock phone for incoming calls. In this situation caller hears following announcement: „Subscriber is temporarily inaccessible, please, call again later” and on phone screen message „please don't disturb”.
+„Do not disturb” service operate differently depending on type of dialed number:
+* when caller dial group number, extension number with activate DND service and belonging to group is treated as busy,
+* when caller dial directly subscriber number with activate DND service, hears announcement „Subscriber is temporarily inaccessible, please call again later”.
+'''''Attention: '''If DND service is active, call forwardings to this extension number don't function.''
+.Move into '''Menu >> Services >> Don't disturb >> On/Off. '''Accept''' '''selected option by pressing '''Next''' key. Exit '''Menu '''by pressing SPK OFF'''. '''
+.Service activity is announced by message '''Do not''' '''disturb''' on display.
+'''''Attention: '''If dialed subscriber has DND service activated, on caller CTS-202 or CTS-202.Plus system phone message „please don't disturb” is displayed.''
+== Park ==
+'''''First method'''''
+.After establishing call or answering incoming call, press '''''Details''''' key and than select option '''Menu >> Services >> Park.'''
+.After voice message „Service is accepted” user should hang up handset and press '''FLASH '''key, to dial number we want to contact, ex. to consult parked subscriber problem. Call will be parked for 3 minutes and interlocutor will hear melody on hold.
+.To return to parked call, You should once more move into '''Menu >> Services >> Park. '''
+.Accept unparking and wait for ringing, which is signal with display message '''''Returning...'''''
+'''''Second method'''''
+.After establishing call or answering incoming call, press '''''Hold''''' key
+.After voice message „Service is accepted” user should hang up handset and press '''FLASH '''key, to dial number we want to contact, ex. to consult parked subscriber problem. Call will be parked for 3 minutes and interlocutor will hear melody on hold.
+.To return to parked call, You should press '''''Unhold '''''key.
+.''Wait for ringing, which is signal with display message '''Returning...''' ''
+== Phone lock ==
+„Phone lock” means assigning lowest privileges to this extension number. Subscriber from locked phone can only establish internal calls and alarm calls (according A class privilegess defined in PABX). On locked phone temporarily or fixed account can be recalled. If service is active phone menu cannot be editet and there is no accerss to system keys. „Phone lock” service is active until canceling it from phone.
+Phone lock can be also activate by PABX admin. Such lock cannot be switched off by subscriber.
+.Move into '''Menu >> Services >> Phone lock.'''
+.Switch on or off phone lock service. Enter PIN (lock code) consist of four digits, ex. 6565 (first lock code is granted by PABX admin and subscriber should change it using service #55).
+.Accept. Exit from '''Menu.'''
+.Service activity is announced by message '''Phone lock '''on phone display.
+.To unlock phone You should press context key '''Unlock '''and enter the PIN code.
+== Fixed account ==
+„Fixed account” means recalling of other extension number privileges on this phone. Recalling account on specified phone causes canceling this account on other extension numbers - if it was recalled. Fixed account can be also recalled on locked phone.
+.Select '''Menu >> Services >> Account. '''Recall or cancel service.
+.Enter account number.
+'''''ATTENTION! '''Pressing [[Image:io cts dol.png]] key, we can obtain access to subscriber list, where we can select account number using up/down arrows or find it according few first name letters.''
+.Accept.
+.Enter account PIN consist of four digits (PIN is granted individually by PABX admin and can be changed using service #55). Accept it
+.Exit '''Menu. '''Service activity is announced by message '''account''' on phone display.
+== Urgent ringing ==
+Urgent ringing is a service with automatic speakerphone switching on for CTS phones or special ringing for analogue phones.
+'''''ATTENTION! '''Description of another method of activate urgent ringing service can be found in chapter 5.1.4. ''
+.Move into '''Menu >> Services >> Urgent ringing.'''
+.Exit '''Menu. '''Service activity is announced by message '''URGENT RINGING''' on phone display.
+.This service is active for number dialed immediately after its selection.
+== Call forwarding ==
+Call forwardings are PABX services which reroute incoming calls to another phone or account. Call forwarding is active until cancel it.
+.Move into '''Menu >> Services >> Call forward.'''
+.Activate or cancel call forwarding.
+.If you activate call forwarding enter number where You want to reroute calls ex. 123
+'''''ATTENTION: '''Using arrow keys it is possible to select type of phone book (extension number list) you want to select number from. After selecting type of phone book (extension number list), appropriate number can be selected using Up/Down keys or entering few first letters of its name.''
+.Accept and select forwarding type:* '''All'''
+* '''Incoming direct '''
+* '''Internal'''
+* '''Incom. announced'''
+* '''From group'''
+.Accept selection and select forwarding condition:* '''Unconditional'''
+* '''While busy'''
+* '''When no answer'''
+* '''While DND'''
+.Accept selection and exit '''Menu'''.
+.Service activity is announced by message '''call forward.''' and letter '''F<ref name="ftn8">'''''Call Forwarding '''''</ref>on display.
+'''''ATTENTION!''' Call forwardings type „From group” with condition „While busy” are not performed by PABX. Additionally if phone is ringing becasuse of group call, only forwardings type „From group” with condition „Unconditional” are active.''
+== Malicious call (MCID)  ==
+Registering call as malicious in upper exchange and marking it as malicious in PABX call bufer.
+'''''Recalling service during call'''''
+.Press '''Details '''key and next Move into '''Menu >> Services >> MCID<ref name="ftn9">'''''Malicious Call IDentification'''''</ref>.
+.Accept service.
+'''''Recalling service after finishing call'''''
+During 30 secs. after hang up handset by caller '''''MCID '''''key should be pressed.
+'''''Attention: '''Handset cannot be hang up first on malicious call target phone.''
+== 3PTY calls ==
+'''''First method of 3PTY call service activation:'''''
+.After establishing call with first interlocutor, press '''FLASH''' key and hold connection.
+.Dial number of second interlocutor and during call move into context menu '''Details >> 3PTY .'''
+.Accept service.''' '''3PTY call is now established.
+.During such call there is posible to switch between interlocutors. In this situation one interlocutor is hold on.
+'''''Second method of 3PTY service activation:'''''
+.After establishing call with first interlocutor, press '''FLASH''' key and hold connection.
+.Dial number of second interlocutor and diuring call press '''FLASH#3.'''
+.PTY call is established.
+'''''ATTENTION: '''3PTY caller can switch between interlocutor pressing context menu '''Details'''.''' '''Next using navigation keys You can select interlocutor to talk with.''
+'''''ATTENTION: '''3PTY call can be finished by pressing '''FLASH#0''' by caller.''
+'''''ATTENTION: '''After hang up handset by caller 3PTY call is disconnected.''
+'''''ATTENTION: '''Caller can talk to only one dialed subscriber (second subscriber hears melody in handset). It is poissible by pressing '''FLASH#1 or FLASH#2 '''(where 1 means that caller will be tak to first dialed subscriber and 2 means that caller will be talk to second dialed subscriber). After pressing '''FLASH#3 '''''3PTY call is reestablished.
+== Call interception ==
+This service enables to intercept calls incoming to another extension number. Only two conditions must be fulfiled to realize this service - extension number from which You try to intercept call must belong to the same PickUp group - call interception group and extension number from which You try to intercept call has no checked field '''PtcPck'''.
+.If You want to intercept call routed to another extension number belonging to the same PickUp group as Your extension number, move into '''Menu >> Services >> Intercept call.'''
+.Move into '''Menu >> Services >> Intercept call. '''Accept selection. Lift hanset.
+'''ATTENTION!''' Call interception can be also realized by lifting handset or pressing '''SPK ON''' key and selecting from keypad '''<nowiki>#37</nowiki>'''.
+== Temporarily CLIR ==
+This service causes switch off number presentation for the time of one call.
+.Move into '''Menu >> Services >> Temporarily CLIR'''. Accept selection.
+.Lift handset or press '''SPK ON''' key.
+.Dial required number.
+== Private call ==
+This service causes change of privileges (setting of private privileges for this extension number) as well as registering this call as private in call register in PABX. Such calls are identyfied by charging software to differentiate office and private calls.
+{|{{Prettytable}}
+| <center>1</center>
+| Move into '''Menu >> Services >> Private call'''. Accept selection.
+|-
+| <center>2</center>
+| Lift handset or press '''SPK ON''' key.
+|-
+| <center>3</center>
+| Dial required number.
+|}
+== Urgent call ==
+Urgent call means granted higher privileges for the time of one call. '''Urgent call''' service is available if extension number is granted with privileges to realize this service. Service is valid for one call established from phone with this extension number.
+{|{{Prettytable}}
+| <center>1</center>
+| Move into '''Menu >> Services >> Urgent call'''. Accept selection.
+|-
+| <center>2</center>
+| Lift handset or press '''SPK ON''' key.
+|-
+| <center>3</center>
+| Dial required number.
+|}
+== Working modes ==
+This service enables manual change of PABX working mode. Extension number can be granted with privileges to changing PABX working mode. It is also posible to assign working mode changing to system phone key.
+.Move into '''Menu >>''' '''Services >> Working mode. '''Using navigation keys appropriate working mode should be selected (ex.: Day - manual mode)
+.After selecting appropriate working mode, press '''Next''' key. PABX ask for access code.
+.After entering '''Access code''' PABX ask for determining hour of validation new working mode. (If You don't determine this hour, selected working mode will be valid until next working mode changing according working mode time table).
+== Voice mail ==
+This service enables caller to leave the voice message for specified subscriber.
+'''''ATTENTION!'''''
+''To use this service, PABX admin should assign voice mail box to specified subscriber and define voice mail extension number, voice mai extension number is used for service activation and for inform about new messages as well as for managing thes messages.''
+Voice mail service is activated after setting call forwarding to voice mail extension number:
+.Move into '''Menu >> Services >> Call forward. >> Activate'''. Accept selection by pessing key '''''Next'''''.
+.Enter extension number of voice mail (default ''1000'') and accept by pressing '''''Next''''' key.
+.Select type of calls, which should be forwarded to voice mail:
+* '''All'''
+* '''Incoming direct '''
+* '''Internal'''
+* '''Incom. announced'''
+* '''From group'''
+and accept it.
+.Select voice mail forwarding condition:* '''Unconditional'''
+* '''While busy'''
+* '''When no answer'''
+* '''While DND'''
+.Accept and exit from '''Menu'''.
+.Servis activity is signal by letter '''V<ref name="ftn10">'''First letter of word ''Voicemail '''''</ref> in right upper corner of display.
+To deacvtivate/activate previously activated service (deactivate/activate set previously defined call forwarding to voice mail box):
+.Move into '''Menu >> Services >> Voicemail >> Off / On'''.''' '''Accept selected option''' '''by pressing key '''''Next'''''. Exit '''Menu''',''' '''for example by pressing '''SPK OFF '''key.
+.Active service is signal by letter '''V''' in right upper corner of display.
+# Remain information concerning voice mail using (recording private message – service #79, informing about new messages and its listening) can be found in PABX Slican CCT-1668.S, L, EU or MAC-6400.
+== Conference ==
+This service enables to simultaneous connect many persons and establish phone conference. Participants of such conference can be PABX subscribers and persons from outside equiped with any phone type. Maximal number of conference participants is equal to:
+* 8 for Slican CCT-1668,
+* 31 for Slican MAC-6400.
+Subscriber who initiate conference can manage this conference (is ''Custodian'' of this conference).
+.Move into '''Menu >> Services >> Conference'''. Information as on bekow picture will be shown on phone display. From this moment phone is busy – it is impossible to call its extensionb number.
+<center>
+{|{{CTS}}
+|
+ Creating..
+ Conference
+   (00:00)
+ Details     Partic.
+|}
+</center>
+.To add participant to the conference, context key '''''Details '''''should be pressed and than option '''Add member '''should be selected. After selection of this option, selection od\f new conference participant is possible. It is possible by:
+* entering new number (internal or external),
+* pressing key '''''Book''''' and selection from appropriate phone book or extension numbers list<ref name="ftn11">Access to appropriate phone book or subscriber list is also possible using navigation keys – see chapter .</ref>,
+* pressing speed access key with assigned number (interrnal or external).
+After adding participant using key '''''New''''' or automatically (if key with assigned subscriber/number was pressed) display returns to status presented below, it enables to add next participants:
+<center>
+{|{{CTS}}
+|
+ -Number-
+ Book    Back
+|}
+</center>
+.Press '''''Back '''''key, if all participants were added to the conference. Display will presents itself as follows:
+In second row from the bottom information acording following standard are presented:
+<center>'''(aa/bb)'''</center>
+where:
+aa – nuber od active participants (subscribers participating currently in conference),
+bb – number of all conference participants.
+To review participants list, press '''''Partic. '''''context key, and than use buttons '''''Up/Down'''''. It is possible to delete participant from list, by selecting '''''Erase''''' from context menu '''''Option'''''.
+<center>
+{|{{CTS}}
+|
+ Creating..
+ Conference
+   (00/06)
+ Options    Partic.
+|}
+</center>
+.To establish conference call:
+'''''First method'''''
+During reviewing participant list or if display presented itself as on picture in point 3 of this table, lift handset or press '''SPK ON '''button. Display will be as follows:
+Phones of selected participants upringing and after answering announcement „Teleconference” can be hear.
+<center>
+{|{{CTS}}
+|
+ Calling..
+|}
+</center>
+'''''Second method'''''
+When display mentioned in point 3 of this table can be seen, press '''''Option''''' key and select option '''Ring'''. Display will be as follows:
+Phones of selected participants upringing and after answering melody is played until caller lifts handset or press the '''SPK ON '''key.
+<center>
+{|{{CTS}}
+|
+ Preview..
+ Conference
+   (00/06)
+ Options     Partic.
+|}
+</center>
+.If conference is established (call was answered by at least one perticipant and conference custodian is active participant of conference, his/her handset is lifted) display will be seen as follows:
+<center>
+{|{{CTS}}
+|
+ Talking to
+ Conference
+:45
+   (04/02)
+ Options     Partic.
+|}
+</center>
+Following options are available after pressing '''''Option''''' key:
+# '''Add member '''– adding new participant to already established conference<ref name="ftn12">It is possible to add participant by pressing '''FLASH '''key, dialing his/her extension number and pressing key with programmed „Conference” service during established call (or selecting this service from menu available on phone display during call).</ref>,
+# '''Call''' – this option is used to „cold” establish conference (caller handset is hang on) – see point 4 of this table,
+# '''Disconnect all'''– finishing conference,
+# '''Mute all '''– switching off microphone in phones of all conference participants (only conference custodian can speak),
+# '''Unmute all '''– switching on microphone in phones of all conference participants,
+# '''Quit '''– quiting conference without finishing it<ref name="ftn13">The same effect can be achieved by hanging on the handset or pressing '''SPK OFF '''key.</ref>. After selecting thyis option phone display will be seen as follow:
+<center>
+{|{{CTS}}
+|
+ Monday
+.12.10   13:23
+ Conference
+ Options     Book
+|}
+</center>
+In above status there are two methods or return to conference call:
+a) by pressing '''''Option''''' key and than selecting option '''Conference''' you can review conference status (the same can be achiewed by pressing speed dialing key with this service programmed):
+After lifting handset or pressing '''SPK ON''' key you can return to conference call.
+<center>
+{|{{CTS}}
+|
+ Preview..
+ Conference
+   (05/02)
+ Options     Partic.
+|}
+</center>
+b) lifting handset or pressing '''SPK ON '''key and then pressing key with programmed „Conference” service.
+Button '''''Partic.''''' Is used to display list of conference participants, this list can be reviewed using '''''Up/Down '''''keys<ref name="ftn14">'''''This functionality is also available for participants, who do not use CTS-202 phone.'''''</ref>. Information concerning specified participants are presented on phone display:
+<center>
+{|{{CTS}}
+|
+ -Particpants-
+ SUBSCRIBER NAME
+   subscriber number
+ No.         (status)
+ Options        Exit
+|}
+</center>
+For selected participant following '''''Option'''''s''''' '''''are possible:
+# '''Delete '''– disconnect conference participant,
+# '''Microphone ON/OFF'''<nowiki> – switching on/off specified subscriber [his/her status changes to (MUTE)/(CALL)],</nowiki>
+# '''Speaking now '''– switching on microphone only for one participant (microphones of remain participants are switched off),
+# '''Private call''' – direct call with only one participant.After such call it is possible:<br/> a) next connecting this participant to the conference – by pressing key with programmed „Conference” service or select appropriate option from context menu visible on phone display during call,<br/> b) disconnecting participant from the conference call – by hanging on the handset or pressing '''SPK OFF '''key.<br/>
+Return to the conference call can be done using method described in point 5 of this table.
+# '''Custodian''' – transfering conference custodian function<ref name="ftn15">Subscriber to whom you want to transfer custodian function should be equipped in CTS-202 phone.</ref>.
+== Call override ==
+This service enables to override existing call and even disconnect this call if it is possible. Service is allovable only from system phone. Subscriber who override extisting call can leave previously override call, without disconecting established call. This service can be realize only from extension number with appropriate privileges and if no one from parts of call to override hasn't protection against override. Service is also available when one part of call to override isn't PABX extension number.
+.If after dialing number You hear busyness signal, display will be look as below.
+<center>
+{|{{CTS}}
+|
+ Calling..
+ SUBSCRIBER NAME
+ subscriber busy
+ AutoRD    Override
+|}
+</center>
+.To override call press '''''Override''''' with right context key. After override display will be look as below.
+<center>
+{|{{CTS}}
+|
+ Calling..
+ SUBSCRIBER NAME
+:41
+ Disconn.
+|}
+</center>
+.To disconnect overrited call You should press '''Disconn.''' using left context key. To leave call without disconnecting it You should hang up hanset or press '''SPK OFF''' key.
+== Automatic redialing - AutoRD ==
+If dialed number:
+* is currently busy,
+* nobody answer the call
+or
+* if all lines in PABX are currently busy
+, after selecting this service, if dialed number:
+* will be free (previously busy),
+* somebody will be near this phone (previoudsly nobody anwered the call)
+or
+* any line in the PABX will be free,
+calle will be announed by PABX about it and after lifting handsetpreviously dialed number will be automatically dialed. This service is available for internal and external calls.
+Service activity time is limited to:
+* 90 minutes for internal calls (both if number is busy or subscriber doesn't answer),
+* 60 minutes for external calls if nobody answer the call,
+* 30 minutes for line busyness,
+* 10 minutes for external calls if target subscriber is busy.<br/>
+ATTENTION:You can subscribe to the queue to
+* subscriber equipped in analogue phone,
+* subscriber equipped in system phone CTS-202.CL, CTS-202.Plus or CTS-202.IP,
+* ezternal subscriber available via ISDN trunk,
+* external subscriber available via GSM trunk<br/> or
+* to any busy PABX trunk.
+{|{{Prettytable}}
+| 1
+| If target subscriber doesn't answer, after about 5-10 seconds '''''AutoRD''''' caption appears as a context key (left bottom corner of display), it enables to activate service.
+{|{{CTS}}
+|
+ Calling..
+ SUBSCRIBER NAME
+ AutoRD
+|}
+|-
+| 2
+| If target subscriber is busy, immediatelly option '''AutoRD''' is available (context key in left bottom corner of display), it enables to activate service.
+{|{{CTS}}
+|
+ Calling..
+ SUBSCRIBER NAME
+ subscriber busy
+ AutoRD
+|}
+|-
+| 3
+| If service is accepted, time to finish service activity is visible on display. By selecting context key '''''Stop''''', you can deactivate service.
+{|{{CTS}}
+|
+ Monday
+.12.10  14:34
+ AUTO RD  (47:21)
+ Stop      Book
+|}
+|-
+| 4
+| If target subscriber is already free or near his/her phone, phone inform you about this by ringing and following captions are seen on display:
+* if previously there were no answer<br/>
+{|{{CTS}}
+|
+ AUTO RD..
+ Is back
+ Options   Mute
+|}
+* if previously target subscriber was busy
+{|{{CTS}}
+|
+ AUTO RD..
+ SUBSCRIBER NAME
+ Options   Mute
+|}
+If in this situation you lift handset, appropriate number is dialed once again.
+|}
+= DECT in phone CTS-202.Plus =
+'''''ATTENTION''': Number presentation on DECT handset is no possible.''
+'''''ATTENTION''': To register hanset, it's PIN code is obvious (read carefully handset manual).''
+'''''ATTENTION''': To register, also CTS PIN code is needed (if You haven't assigned PIN code contact with PABX admin).''
+== Registering handset in system phone ==
+{|{{Prettytable}}
+| <center>1</center>
+| Move into '''Menu >> DECT >> Register. '''Accept selection.
+|-
+| <center>2</center>
+| Handset should be register in one minute.
+|-
+| <center>3</center>
+| Confirm handset registration.
+|}
+Example of DECT Moonlight<sup>300</sup> by Premier<sup>®</sup>.
+'''''Attention: '''As gray operation need to be performed in Moonlight<sup>300</sup>handset menu.''
+.Move into menu DECT Moonlight<sup>300</sup> handset and select option Register.
+.Accept selection.
+.Enter handset PIN code (default PIN for Moonlight<sup>300</sup> is 0000) and accept it.
+.Select base station number where handset should be register.
+.Base station searching started.
+.Menu [[Image:io cts prawo.png]] move into system phone '''Menu >> DECT >> Register'''
+.Select [[Image:io cts prawo.png]] Accept selection.
+.Handset should be register in one minute.
+{|{{CTS}}
+|
+ -Registering-
+s
+ Canel
+|}
+.Handset find number of base station to cooperate with and show this number on display.
+.Enter authorization code (it is extension number PIN code).
+.
+{|{{CTS}}
+|
+ -Registering-
+   Completed
+         OK
+|}
+== Removing handset ==
+.Move into '''Menu >> DECT >> Remove hanset.'''
+.Accept.
+== Status ==
+{|{{Prettytable}}
+| <center>1</center>
+| Move into '''Menu >> DECT >> Status.'''
+|-
+| <center>2</center>
+| Info about software version, RFPI number of DECT module as well as IPEI code is shown on display.
+|-
+| <center>3</center>
+| Check if number saved in handset is the same as number saved in base station.
+|-
+| <center>4</center>
+| Accept.
+|}
+= Phone special functions =
+== Pause in daled number ==
+Pause in dialed number force temporarily dial waiting for a 5 seconds.
+* '''''Example of dialing external number together with its extension number'''''
+.While cold number dialing (''''' 9.2 "Cold" number dialing''''') or during adding new entry to phone book. ('''''12.2.1 Adding new entry to phone book''''')
+.Dial first part of number (ex. main number for subscriber 0523251111)
+.Press „*” twice and letter „p” appear. (If You want to extend waiting time repeat it)
+.Dial second part odf number (ex. extension number 168)
+'''''Attention: '''Pause can be also added when we''' '''add new entry to public or private phone book.''
+= Information about line busyness and PABX failures =
+If for specified phone, PABX activate option of displaying info about trunks busyness and option of displaying information about PABX failures, they will be displayed on phone display.
+{|{{CTS}}
+|
+ Monday
+.12.10  14:34
+    BUFFER 84%
+   (02/04)(03)
+ Menu       Back
+|}
+In third row of display are presented info about PABX alarms, following types of info can be presented: call buffer overload, emergency power supply operation, trunk damages.
+In second row from the bottom info about trunks busyness, according following formula, are presented:
+<center>(aa/bb)(cc)</center>
+where:
+aa – number of busy lines,
+bb – number of available lines,
+cc – number of damaged trunks,
+as a line you can assume:
+* one analogue trunk,
+* one ISDN (2B+D) channel,
+* one ISDN (30B+D)channel,
+* one VoIP channel,
+* one GSM trunk.
+So called anonymous VoIP trunks are never presented as damaged. Additionally if ISDN (2B+D) trunk is damaged, from number in '''bb''' field two lines will be substracted (2 B channels). Symilarly for ISDN (30B+D) trunk, 30 lines will be substracted.
+It should be also noted, that if VoIP trunk will be presented as damaged,no one channel will be substract from '''bb '''field, because this channel can be dynamically assigned to another trunk, so trunk damage is not equal to the channel damage.
+= Security requirements for CTS system phones =
+Stricty observe safety rules and proper using is unconditionally required for proper operating of system phone CTS-202.
+Below You can find basic rules of accepting all warranty notes from users.
+These rules concern installation, locating and requirements for electrical and data communication networks.
+'''Installation:'''
+* CTS-202 should be installed and startup by service with manufacturer authorization.
+* All installation activities shoud be performed according assembling rules and local safety regulations.
+'''Working environment:'''
+# CTS-202 should not be installed in premises with high humidity due to durability and quality of electrical elements.
+# CTS-202 should not be installed near water reserviors (pools, taps, etc.).
+# System phone should not be installed in premises with high dustiness or electromagnetic field intensity.
+It is strictly forbidden to instal system phone in following permises::
+# in permises with direct influence of solar light,
+# in permises where wibration are very often or strong,
+# near radio aerials (especially for short waves).
+All devices connected to system phone should have certificates of conformity with EU regulations.
+= Certificate of conformity, proper device disposal =
+<table width=99% border="1" bordercolor=black rules=all style="margin:1em 1em 1em 0;border:solid 1px #AAAAAA; border-cellapse;empty-cells:show">
+        <tr>
+		<td colspan="3"><b><center><font size="5">CERTIFICATE OF CONFORMITY</font></center></b></td> <td rowspan="2"><center>[[Image:deklaracja ce.png|100px]]</center></td>
+	</tr>
+        <tr>
+                <td width=25%> ''Manufacturer:''<br>
+		'''SLICAN sp. z o.o.'''<br>
+		ul. M. Konopnickiej 18<br>
+-124 Bydgoszcz<br></td>
+		<td width=25%> ''Type:''<br><br>
+		'''System phone Console'''</td>
+		<td width=25%> ''Model:''<br>
+		'''SLICAN CCT-1668'''</td>
+        </tr>
+        <tr>
+              <td colspan="4"> ''Device description:''<br>
+Access control system SKD and BRV are devices to cooperation with Slican PABXes, they are connected to analogue port. They realize basic doorphone functionality. They enable to establish call between any phone connected to Slican PABX and device installed by door as well as opening electro-lock.</td>
+        </tr>
+        <tr>
+         <td colspan="4"> Product fulfiles following EU Directive 99/5/WE '''R&TTE''', it also fulfiles requirements of following harmonized standards:
+EN 60950-1:2001 + A11:2004; EN 55022:1998 + A1:2000 + A2:2003; EN 55024:1998 + A1:2001 + A2:2003; </td>
+        </tr>
+        <tr>
+         <td colspan="4">  ''Additional information:''<br>
+Current text of certificate of conformity can be downloaded from website [http://www.slican.com/ www.slican.com]
+Device was tested in typical configuration, while connect to SLICAN PABXes. It fulfiles requirements concerning allowed disturbances level for B class devices.
+While wrong installation of device, it is assigned to A class and following warning is valid:
+„This device ia A class product. In normal circumstances it may caused radio disturbances, which required user to undertake proper activity”.
+        </td>
+        </tr>
+        <tr>
+         <td colspan="2"><center>Bydgoszcz, 20-11-2007</center> </td>
+         <td colspan="2">[[Image:Deklaracja_podpis.png|150px]] </td>
+        </tr>
+</table>
+<center>[[Image:io skd proper equipement.png]]</center>

Difference between revisions of "CTS-202 - information"

Revision as of 21:39, 8 August 2010

Contents

Introduction

Features

Equipement

Structure

Phone

Display

Console

Connecting CTS phones to PABX

Phisical connecting CTS-202 phones to PABX

CTS-202.IP configuration for operating with PABX

Phone configuration for operating in LAN network

Phones configuration for work in WAN network (internet)

Error messages and solving problems with connecting phones CTS-202.IP to PABX

Connecting CTS-232 console

Connection of headphones and external microphone

Connecting CTS-202.Plus and CTS-202.IP phonesto external call recording system

Phone settings

Phone maintenance

Phone menu (navigation through phone menu)

Quick return to main screen

Function keys

Menu structure

Quick moving through menu

Receiving and finishing call

Dialing number from phone keypad

"Hot" number dialing

"Cold" number dialing

Dialing numbers from lists

Redial

Selecting extension number from subscriber list.

Extension number presentation status

Call history (Call register)

Using speed access keys

Programming speed access keys

Speed access keys – subscribers and accounts

Speed access keys – groups

Speed access keys – phone book entries and services

Speed access keys - functions

Speed access keys – lines

Conveniences concerning speed access keys

Preview and change of programmed key

Call interception

Call transfer without answering call

Urgent ringing

Programmed keys list

Phone book

Searching entries in phone book (public and private)

Saving data to phone book

Adding new entry to phone book

Saving number during call

Entry from call history

Entries operations

Edition

Copying between phone books

Moving between phone books

Erasing entry from phone book.

Assigning speed access key to programmed key

Services

Transfering call

Do not disturb – DND service

Park

Phone lock

Fixed account

Urgent ringing

Call forwarding

Malicious call (MCID)

3PTY calls

Call interception

Temporarily CLIR

Private call

Urgent call

Working modes

Voice mail

Conference

Call override

Automatic redialing - AutoRD

DECT in phone CTS-202.Plus