Difference between revisions of "ITS - Connecting with PC"

From pubWiki-en
Jump to: navigation, search
(→‎I haven't network with DHCP server - what is default PBX IP address?)
(→‎I haven't network with DHCP server - what is default PBX IP address?)
Line 15: Line 15:
 
{{warning|To assign default IP address and switch off DHCP server, code '''*930''' should be dialed from tone phone connected to any FXS port}}
 
{{warning|To assign default IP address and switch off DHCP server, code '''*930''' should be dialed from tone phone connected to any FXS port}}
 
*Selecting service *930 causes:
 
*Selecting service *930 causes:
−
** wyłączenie klienta DHCP (o ile wcześniej był włączony) co zostanie potwierdzone komunikatem "Usługa została przyjęta" a następnie po ok 3 sekundach nastąpi reset centrali. Po resecie centrala będzie miała następujące ustawienia sieciowe:
+
** switching off DHCP client (if it wasn't switched off earlier), it is confirmed by voice message "Service accepted", then after circa 3 seconds PBX resets automatically. After reset following network settings are stored in PBX:
 
  IP - 192.168.0.247
 
  IP - 192.168.0.247
−
  MASKA - 255.255.255.0
+
  MASK - 255.255.255.0
−
  BRAMA - 192.168.0.1
+
  GATEWAY- 192.168.0.1
 
  DNS - 194.204.159.1
 
  DNS - 194.204.159.1
 
*Brak zmian w ustawieniach (o ile wcześniej DHCP był wyłączony) co zostanie potwierdzone komunikatem "Usługa aktywna".
 
*Brak zmian w ustawieniach (o ile wcześniej DHCP był wyłączony) co zostanie potwierdzone komunikatem "Usługa aktywna".

Revision as of 06:51, 11 August 2010

Connecting PC with PBX can be done using Internet browser. Congruent browser are listed below:

Congruent www browsers

  • FireFox 3.5.x and 3.0.x - recommended by manufacturer
  • Google Chrome 3.x

What IP address is assigned to Slican ITS by DHCP server? - *947

Warning! To listen IP address code *947 should be dialed from tone phone connected to any FXS port
  • Listened address should be entered to browser address bar and confirmed by Enter.
  • Default access password: slican

Above mentioned setting (Slican ITS is DHCP client) is default.

I haven't network with DHCP server - what is default PBX IP address?

Warning! To assign default IP address and switch off DHCP server, code *930 should be dialed from tone phone connected to any FXS port
  • Selecting service *930 causes:
    • switching off DHCP client (if it wasn't switched off earlier), it is confirmed by voice message "Service accepted", then after circa 3 seconds PBX resets automatically. After reset following network settings are stored in PBX:
IP - 192.168.0.247
MASK - 255.255.255.0
GATEWAY- 192.168.0.1
DNS - 194.204.159.1
  • Brak zmian w ustawieniach (o ile wcześniej DHCP był wyłączony) co zostanie potwierdzone komunikatem "Usługa aktywna".

Back

Retrieved from "https://pubwiki.slican.com/index.php?title=ITS_-_Connecting_with_PC&oldid=2136"