Revision as of 14:21, 26 November 2010

Multi Audio Box MAB-1101 Installation and operation manual v1.02

SLICAN Sp. z o.o. www.slican.pl e-mail: office@slican.pl

„Manufacturer reserves right to modify the product without prior notice.”

Connecting and preparing configuration

MAB-1101 is equipped in following input/output ports:

LINE socket type RJ11 for connecting PABX subscriber port,
PHONE socket type RJ11 for connecting analogue phone,
AUDIO in/out socket type mini Jack.
- in IN mode there is possible to connect headphone of audio device ex. MP3 Player.
- in OUT mode it is possible to connect input of audio card,
microphone inside MAB-1101 enables to listen premise.

jumpers X1-X5 are used for selection of function fulfilled by MAB-1101,
jumper X6 enables to increasing amplification (boost) of microphone or IN signal,
changes in jumper location should be done after disconnection of telephone line

Warning! If device is configure to fulfill OUT or REC function, it is recommended to set X6 jumper in NORMAL positiion.

@@ Line 90: / Line 90: @@
 |}
-{{warning|Gdy urządzenie jest ustawione na funkcję OUT lub REC, zalecane jest ustawienie zworki X6 w pozycji NORMAL.}}
+{{warning|If device is configure to fulfill OUT or REC function, it is recommended to set X6 jumper in NORMAL positiion.}}
 = Przykładowe konfiguracja =
 [[Grafika: MAB_funkcje_in.png]] [[Grafika: MAB_funkcje_mic.png]]<br />
 [[Grafika: MAB_funkcje_out.png]] [[Grafika: MAB_funkcje_rec.png]]