Difference between revisions of "Version 4.10"
From pubWiki-en
(→New functionalities in Slican Servers) |
(→New functionalities in Slican Servers) |
||
| Line 24: | Line 24: | ||
* Maintenance of MSB-1102: | * Maintenance of MSB-1102: | ||
** relay control: | ** relay control: | ||
| − | *** | + | *** by dialing extension number assigned to relay, |
| − | *** | + | *** relay status confirmed by announcement. |
| − | + | ** asking sensor status. | |
| − | ** | + | * Data send by embedded recording system can be coded |
| − | * | + | |
Revision as of 12:53, 1 February 2011
Firmware 4.10 - availability without licence (serial numbers)
Version 4.10 is delivered in brand new PABXes, for older PABXes license code is required - according rules presented below.
| Model | Serial no. |
|---|---|
| CCT-1668 | 11281 and higher |
| MAC-6400 | 0644 and higher |
| CXS-0424 | 0957 and higher |
New hardware
- Maintenance of CTS-203.IP-PoE phone
- MSB Multi Switch Box relay and sensor system for Slican MAC-6400, CCT-1668 and CXS-0424 - system is connected directly to subscriber port.
New functionalities in Slican Servers
- Maintenance of IO/RS card in Slican CXS-0424
- Announcing by SMS:
- about service alarms concerning with PABX
- about events triggered by:
- sensor (using MSB-1102 and/or IO/RS in Slican CXS-0424),
- manual working mode change,
- attain free minutes limit.
- Maintenance of MSB-1102:
- relay control:
- by dialing extension number assigned to relay,
- relay status confirmed by announcement.
- asking sensor status.
- relay control:
- Data send by embedded recording system can be coded
