Difference between revisions of "Version 4.10"
From pubWiki-en
(→New hardware) |
(→New functionalities in Slican Servers) |
||
| Line 29: | Line 29: | ||
** asking sensor status. | ** asking sensor status. | ||
* Data send by embedded recording system can be coded | * Data send by embedded recording system can be coded | ||
| − | {{warning|Embedded recording system change required. If you use embedded recording system with RecordMAN2.client, RecordMAN2.server or both, you should change used applications to version 3.00.}} | + | {{warning|Embedded recording system change required. If you use embedded recording system with RecordMAN2.client, RecordMAN2.server or both, you should change used applications to version 3.00. Additionally if any FTP client is used to download recordings (instead of Slican RecordMAN2) license code is required for every workstation with FTP client installed.}} |
---- | ---- | ||
[[PABX firmware| Back]] | [[PABX firmware| Back]] | ||
Revision as of 13:49, 11 February 2011
Firmware 4.10 - availability without licence (serial numbers)
Version 4.10 is delivered in brand new PABXes, for older PABXes license code is required - according rules presented below.
| Model | Serial no. |
|---|---|
| CCT-1668 | 11281 and higher |
| MAC-6400 | 0644 and higher |
| CXS-0424 | 0957 and higher |
New hardware
- Maintenance of CTS-203.IP-PoE phone
- MSB Multi Switch Box relay and sensor system for Slican MAC-6400, CCT-1668 and CXS-0424 - system is connected directly to subscriber port.
New functionalities in Slican Servers
- Maintenance of IO/RS card in Slican CXS-0424
- Notifications by SMS:
- about service alarms concerning with PABX
- about events triggered by:
- sensor (using MSB-1102 and/or IO/RS in Slican CXS-0424),
- manual working mode change,
- attain free minutes limit.
- Maintenance of MSB-1102:
- relay control:
- by dialing extension number assigned to relay,
- relay status confirmed by announcement.
- asking sensor status.
- relay control:
- Data send by embedded recording system can be coded
|
