Difference between revisions of "Characteristic of Slican DPH doorphones"

From pubWiki-en
Jump to: navigation, search
Line 1: Line 1:
−
Slican DPH doorphones connected to PBX enable to establish call between person near doorphone and PBX subscriber, as well as enter to protected area. It is also possible to trigger an electrolock, for opening door or gate, from phone connected to PBX. Following functions are available in DPH doorphones:
+
{{Warning|
−
* establish phone call using touch button
+
Slican doorphones DPH.AB with DG note mean new colour version – Dark Graphite. Funcionally they do not differ from version without DG}}
−
* two relays trigger
+
 
 +
 
 +
Doorphones connected to PBX through existing telephone network allows pepole who intend to enter closed area to communicate with people in that area. In addition they allow activate electrolock or relay (EZ or STA) to control opening of door or gate using:
 +
* telephone with which is call by selecting appropriate DTMF code on acoustics - * (asterisk) or digits 1 or 2
 +
* RFID version - approach identifier
 +
* POD (door open button)
 +
 
 +
 
 +
DPH doorphones have following functional features:
 +
* making a phone call using the capacitive button
 +
* controlling two outputs with:
 
** electrolock (EZ)
 
** electrolock (EZ)
 
** additional relay (STA)
 
** additional relay (STA)
−
* power supply with 12-25VAC or 14-35VDC
+
* power suppply: 18-25V AC lub 14-35V DC
−
* temperature range -20 to +70
+
* operating temperature range: -20 to +50 <sup>o</sup> C
−
* protection level - according PN-EN 60529, IP34 for DPH and IP20 for power supply.
+
* security level - IP32
−
* inputs COD (opening door sensor) i POD (opening door button). Both buttons operate with electrolock.
+
* detection of PBX notification signal (INACCESS) with following properties:
−
* EZ trigger (opening) by receiving "*" character in DTMF code
+
** frequency: 425Hz (+- 25Hz)
−
* embedded RFID card reader (not all models)
+
* Busy signal detection with the properties:
−
* possibility to trigger EZ by registered RFID card approach
+
** frquency: 425Hz (+- 25Hz)
−
* STA trigger (second relay) by receiving "1" character in DTMF code. Single pulse with fixed duration time is generated
+
** signal/silence duration: 352ms - 608ms
−
* Doorphone parameters programming from phone using DTMF code
+
** number of consecutive signal and silence sequences detected: 3
 +
* detection of unreachable signal (CONGESTION) with properties:
 +
** frequency: 425Hz (+- 25Hz)
 +
** signal/silence duration: 192ms - 320ms
 +
** number of consecutive signal and silence sequences detected: 3
 +
* COD (door open sensor) and POD (door open button) inputs. Both inputs cooperate with electrolock
 +
* EZ or STA trigger (open) as result of receiving "*" in DTMF, depending on setting of corresponding parameter
 +
* EZ trigger as result of receiving "1" in DTMF
 +
* STA trigger (second output) as result of receiving "2" in DTMF. Single pulse of constant duration is generated
 +
* built-in RFID card reader (cards Unique 125kHz standard, compatible with EM4102 chip - doorphone version without RFID are also available)
 +
* option of EZ or STA triggering as result of approaching registered RFID card (in selected versions)
 +
* programming doorphone from phone using DTMF codes

Revision as of 11:21, 16 December 2019

Warning!

Slican doorphones DPH.AB with DG note mean new colour version – Dark Graphite. Funcionally they do not differ from version without DG


Doorphones connected to PBX through existing telephone network allows pepole who intend to enter closed area to communicate with people in that area. In addition they allow activate electrolock or relay (EZ or STA) to control opening of door or gate using:

  • telephone with which is call by selecting appropriate DTMF code on acoustics - * (asterisk) or digits 1 or 2
  • RFID version - approach identifier
  • POD (door open button)


DPH doorphones have following functional features:

  • making a phone call using the capacitive button
  • controlling two outputs with:
    • electrolock (EZ)
    • additional relay (STA)
  • power suppply: 18-25V AC lub 14-35V DC
  • operating temperature range: -20 to +50 o C
  • security level - IP32
  • detection of PBX notification signal (INACCESS) with following properties:
    • frequency: 425Hz (+- 25Hz)
  • Busy signal detection with the properties:
    • frquency: 425Hz (+- 25Hz)
    • signal/silence duration: 352ms - 608ms
    • number of consecutive signal and silence sequences detected: 3
  • detection of unreachable signal (CONGESTION) with properties:
    • frequency: 425Hz (+- 25Hz)
    • signal/silence duration: 192ms - 320ms
    • number of consecutive signal and silence sequences detected: 3
  • COD (door open sensor) and POD (door open button) inputs. Both inputs cooperate with electrolock
  • EZ or STA trigger (open) as result of receiving "*" in DTMF, depending on setting of corresponding parameter
  • EZ trigger as result of receiving "1" in DTMF
  • STA trigger (second output) as result of receiving "2" in DTMF. Single pulse of constant duration is generated
  • built-in RFID card reader (cards Unique 125kHz standard, compatible with EM4102 chip - doorphone version without RFID are also available)
  • option of EZ or STA triggering as result of approaching registered RFID card (in selected versions)
  • programming doorphone from phone using DTMF codes
Retrieved from "https://pubwiki.slican.com/index.php?title=Characteristic_of_Slican_DPH_doorphones&oldid=7827"