Technical data CCT EU

Technical data

• power supply 230VAC, 50Hz,
• power consumption max. 120 VA (for all PABX ports occupation),
• protection against overcurrents and overvoltage from telecommunication network,
• analogue internal ports with pulse and tone (DTMF) dialing,
• ISDN phones with DSS1 signaling operation,
• full functionality for phones with DTMF,
• CLIP signaling: internal and transfered to external lines,
• CLIP receiving in FSK system on analogue trunks,
• configurable ISDN BRA 2B+D ports (terminals ISDN S/T),
• ports of analogue trunks,
• terminals:
  - ISDN 2B+D – DSS1 protocol (EURO – ISDN),
  - ISDN 30B+D – only in models L and EU - DSS1 protocol (EURO – ISDN),
  analogue external trunks, according ASS signaling,
  - GSM – Dual Band: GSM 900, GSM 1800,
  - VoIP – via LAN, WAN interfaces- according SIP, IAX protocols, (codecs: GSM, G.711a/μ, G.729),
  - U_p0 – digital terminals for system phones CTS-202.CL, CTS-202.BT.
• interfaces:
  - LAN, WAN – Ethernet 10/100 Mbps,
  - RS-232,
  - USB 2.0.
• PABX ambient temperature: +5^oC÷+35^oC,
• air humidity: 40÷70%,
• fulfiling directives for CE sign obtaining :

• • LVD,
  • EMC,
  • R&TTE.

Assembly requirements

1. PABX should be mounted in 19” racks.
2. PABX should not be mounted:
   1. in premises with high insolation,
   2. in premises with high humidity,
   3. in premises with high pollination,
   4. zbyt blisko urządzeń emitujących silne pole elektromagnetyczne,
   5. near decvices with strong electromagnetic field,
3. PABX assembly should be executed according conditions included in guarantee card.

Montaż centrali w szafie 19”

1. Wygospodaruj w szafie 19” przestrzeń o wysokości 4U.
   
2. Rozmieść w profilach montażowych uchwyty pod śruby mocujące zgodniez rozstawem otworów mocujących w centrali.
   
3. Przykręć centralę do profili montażowych.
   
4. Podłącz kabel zasilający do listwy zasilającej z uziemieniem ochronnym w szafie 19”.