MAB-1101 Instruction manual

Multi Audio Box MAB-1101 Installation and operation manual v1.02

SLICAN Sp. z o.o. www.slican.pl e-mail: office@slican.pl

„Manufacturer reserves right to modify the product without prior notice.”

Connecting and preparing configuration

MAB-1101 is equipped in following input/output ports:

• LINE socket type RJ11 for connecting PABX subscriber port,
• PHONE socket type RJ11 for connecting analogue phone,
• AUDIO in/out socket type mini Jack.
  • in IN mode there is possible to connect headphone of audio device ex. MP3 Player.
  • in OUT mode it is possible to connect input of audio card,
• microphone inside MAB-1101 enables to listen premise.

Configuration settings

• jumpers X1-X5 are used for selection of function fulfilled by MAB-1101,
• jumper X6 enables to increasing amplification (boost) of microphone or IN signal,
• changes in jumper location should be done after disconnection of telephone line

Jumper location
function	no		X1	X2	X3	X4	X5	X6
REC	3					•	•	•
	2					•
	1		•	•	•	•
OUT	3		•	•	•	•	•	•
	2					•
	1					•
IN normal	3		•	•	•	•	•	•
	2				•
	1				•
IN boost	3		•	•	•	•	•
	2				•
	1				•			•
MIC normal	3		•	•	•	•		•
	2				•
	1				•		•
MIC boost	3		•	•	•	•
	2				•
	1				•		•	•

Warning! If device is configure to fulfill OUT or REC function, it is recommended to set X6 jumper in NORMAL positiion.

Przykładowe konfiguracja

Grafika: MAB_funkcje_in.png Grafika: MAB_funkcje_mic.png
Grafika: MAB_funkcje_out.png Grafika: MAB_funkcje_rec.png