DPH.IP Opening housing
From pubWiki-en
DPH.IP front panel is screwed to backside of the housing with M4 allen screw attached in set. Screw lpace is shows with 1 on below drawing.
Used on drawing signs are explained in below table.
| DPH.IP-KS16DRF.C | DPH.IP-KS4DRF.C | DPH.IP-KS1RF.C | DPH.IP-CR0RF |
|---|---|---|---|
 |
 |
 |
|
| 1. Mounting screws | 1. Mounting screws | 1. Mounting screws | 1. LED |
| 2. Speaker | 2. Speaker | 2. Speaker | 2. RFID reader |
| 3. Camera hole | 3. Camera hole | 3. Camera hole | 3. SETUP jumper |
| 4. Holes for IR | 4. Holes for I | 4. Holes for I | 4. Mounting holes |
| 5. LCD display | 5. LCD display | 5. Button label | |
| 6. Keypad | 6. Navigation buttons | 6. Ring button | |
| 7. Microphone | 7. Microphone | 7. Microphone |
DPH.IP mainboard is show on below drawing:
| Digit | Descriptione |
|---|---|
| 1 | Place for camera module with IR |
| 2 | Button label (for DPH.IP-KS1RFC) |
| 3 | Camera plugin |
| 4 | IR plugin |
| 5 | Doorphone speaker plugin |
| 6 | ETH network interface |
| 7 | SETUP jumper |
| 8 | Additional expansion module terminal (WIEGAND) |
| 9 | EZ work mode jumper |
| 10 | Terminals for alternative power supply and adtitional features |
| 11 | Anti sabotage switch |
| 12 | Microphone plugin |
