ITS - Connecting with PC

From pubWiki-en
Revision as of 06:51, 11 August 2010 by Grzegorzg (Talk | contribs) (I haven't network with DHCP server - what is default PBX IP address?)

Jump to: navigation, search

Connecting PC with PBX can be done using Internet browser. Congruent browser are listed below:

Congruent www browsers

  • FireFox 3.5.x and 3.0.x - recommended by manufacturer
  • Google Chrome 3.x

What IP address is assigned to Slican ITS by DHCP server? - *947

Warning! To listen IP address code *947 should be dialed from tone phone connected to any FXS port
  • Listened address should be entered to browser address bar and confirmed by Enter.
  • Default access password: slican

Above mentioned setting (Slican ITS is DHCP client) is default.

I haven't network with DHCP server - what is default PBX IP address?

Warning! To assign default IP address and switch off DHCP server, code *930 should be dialed from tone phone connected to any FXS port
  • Selecting service *930 causes:
    • switching off DHCP client (if it wasn't switched off earlier), it is confirmed by voice message "Service accepted", then after circa 3 seconds PBX resets automatically. After reset following network settings are stored in PBX:
IP - 192.168.0.247
MASK - 255.255.255.0
GATEWAY- 192.168.0.1
DNS - 194.204.159.1
  • Brak zmian w ustawieniach (o ile wcześniej DHCP był wyłączony) co zostanie potwierdzone komunikatem "Usługa aktywna".

Back