ITS - PBX firmware
From pubWiki-en
Revision as of 08:51, 23 November 2010 by Grzegorzg (Talk | contribs) (→What firmware version is in my Slican ITS?)
Contents
What firmware version is in my Slican ITS?
It is necessarily to connect to ITS using Internet browser. Next you should select Pane:System
Version 1.02.0010
- News
- possibility of time zone selection
- ringing time limitation for doorphone calls
- Fixed bugs:
- Wrong hour after time zone change.
- No possibility of transfer outgoing call by IP subscriber.
- Call limit for SIP account was increased to two, to enable call transfer executed on phone level (not on PBX level).
- Announced transfer for SIP account.
- No busy signal for calls incoming via any trunk and routed to busy VoIP subscriber.
- Improper calls routing for VoIP provider.
- While group upringing - after disconnect of busy phones, they didn't start ringing.
Version 1.01.1180
- Possibility of configuring up to 6 VoIP trunk in model ITS-0286.
- English language added. (Both GUI and announcements).
- Possibility of fixed assignment outgoing line to specified port.
- Calls history for established outgoing calls added - Pane Call log.
- PBX identifier added. Pane: Global options Field PABX Description
- Delay in DTMF sending for outgoing calls via FXO. Pane Lines (FXO) Field DTMF delay.
Version 1.01.1080
- Echo cancellation on FXO lines.
- Near-end crosstalk liquidation while operating with some DECT phones
- Outgoing calls routing via 0
- Access facilities: Login removal
Version 1.01.1010
- problem with disconnecting (from time to time) calls realized via analogue lines eliminated;
- possibility of establishing outgoing calls via different lines even if prefix is the same;
- PBX working modes launched;
- VoIP port status included in GUI;
- problems with call transit eliminated;
- once more upringing agents who were busy while start group upringing;
- call forwarding service to internal and external numbers;
How to use transferring call service
*72 phone number - unconditional call forwarding for all calls routed to this phone number
*73 - switch off call forwarding
Call forwarding service is valid until PBX reset
First production version
- 1.01.0820 - version issued in day of PABX premiere - 26.10.2009