Dane techniczne centrali IPS-08/IPS Technical information
From pubWiki-en
Slican IPS-08 parameters
- VoIP functionality available in basic version,
- G711a codec,
- calls registration system content available in basic configuration, (up to 8xREC),
- 99 voice announcements (DISA/Infolines or DND messages),
- dedicated IP system phones, CTS-102.IP, CTS-203.IP, CTS-330,
- call recording feature (requires the installation of a microSD card),
- phonebook up to 10 000 contacts,
- access to link with other Slican servers using eSSL protocol(100, 101),
- access to link with foreign servers using SIP protocol,
- remote management using PC via: LAN or Internet,
- LCR - Least Cost Routing: costs reduction, reliability, linking,
- real-time monitoring, using management application,
- ability to configure IP system phones using ConfigMAN,
- managing the costs of calls and call tariffs by using the internal server mechanisms and an additional application – BillingMAN,
- subscriber services confirmed with voice messages,
- analogue ports of extension phones with pulse dialling and DTMF,
- full functionality for phones with DTMF,
- internal CLIP signalling and transfer of public signals,
- cooperation with CTI modules packages (PhoneCTI, WebCTI)
- open HTTP / EbdRECP / TAPI / HOTELP / XML / CTIP protocols
Interfaces
- one public analogue line (POTS), according to ASS signalling,
- one SIM card -GSM – Tri-Band 900/1800/1900MHz
- VoIP – according to SIP protocol (v.2.0), eSSL (Extended Slican Smart Link)
- LAN – Ethernet 10/100 Mbps,
- SN/RL - port allows you to use the server to perform the function of automation and notification.
- support of Slican doorphones and Slican DPH access control system,
- power supply from alternating current network ~230V, 50Hz,
- maximal power consumption 12W,