NCP technical specification

From pubWiki-en
Revision as of 11:12, 29 December 2020 by Arturs (Talk | contribs)

Jump to: navigation, search

NCP Call Manager

Network Centric PBX is consisted of one (or two in case of redundancy system) Call Manager NCP-CM, connected to it Gateways NCP-GW and system capacity expanding Switch - NCP-SW shelves.

Call Manager alone is a fully working PBX, in which we can configure IP terminals, IP providers and all services. To use TDM equippment, additional GWS (24 ports) or GWD (48 ports) with expansion modulesare required.
NCP-PBX can cooperate with maximum three independent networks via LAN, INT ar WAN interfaces (depending on CM type).

Available Call Manager solutions:

Call Manager
Description
Preview
NCP-CM300P
low traffic support
 FUNCTIONAL FEATURES:
  • Up to 40 simultaneous voice calls
  • Up to 3 simultaneous video calls
  • Capacity: up to 5xNCP-GW, 58xTrunkGSM, 1xTrunkISDN-E1, 16xTrunkISDN-2B+D
  • Support for 64xCTS (Upn and IP)
  • Up to 100 WebCTI/PhoneCTI accounts
  • Up to 300 subscriber equipment (FXS+SIP+CTS.Upn+CTS.IP)
  • Up to 40 simultaneous channels recorded
  • Storage space for 640h recorded calls (G.711 alaw codec)
  • Billing buffer capacity of 500k events

HARDWARE FEATURES:

  • RACK SHELF 1.5U housing - depth 310mm
  • Mass storage device capacity: 60GB
  • RJ45 interfaces: FE-LAN, FE-WAN/INT, 6xETH-INT
  • 230VAC powering
 NCP-CM300P.png
NCP-CM400P
average traffic support
 FUNCTIONAL FEATURES:
  • Up to 100 simultaneous voice calls
  • Up to 20 simultaneous video calls
  • Capacity: up to 20xNCP-GW, 120xTrunkGSM, 6xTrunkISDN-E1, 32xTrunkISDN-2B+D
  • Support for 400xCTS (Upn i IP)
  • Up to 400 WebCTI/PhoneCTI accounts
  • Up to 1000 subscriber equipment (FXS+SIP+CTS.Upn+CTS.IP)
  • Up to 100 simultaneous channels recorded
  • Storage space for 1530h recorded calls (G.711 alaw codec)
  • Billing buffer capacity of 500k events
  • Redundancy feature

HARDWARE FEATURES:

  • RACK SHELF 1.5U housing - depth 310mm
  • Mass storage device capacity: 120GB
  • RJ45 interfaces: GbE-LAN, INT/RDU, GbE-WAN/INT, 8xETH-INT
  • 230VAC powering
 NCP-CM400P.png
NCP-CM600P
heavy traffic support
 CECHY FUNKCJONALNE:
  • Up to 300 simultaneous voice calls
  • Up to 40 simultaneous video calls
  • Capacity: up to 127xNCP-GW, 120xTrunkGSM, 13xTrunkISDN-E1, 32xTrunkISDN-2B+D
  • Support for 800xCTS(Upn i IP)
  • Up to 800 WebCTI/PhoneCTI accounts
  • Up to 10k subscriber equipment abonenckich (FXS+SIP+CTS.Upn+CTS.IP)
  • Up to 300 simultaneous channels recorded
  • Storage space for 3400h recorded calls (G.711 alaw codec)
  • Billing buffer capacity of 500k events
  • Redundancy feature

HARDWARE FEATURES:

  • RACK SHELF 1.5U housing - depth 310mm
  • Mass storage device capacity: 120GB
  • RJ45 interfaces: GbE-LAN, INT/RDU, GbE-WAN/INT, 8xETH-INT
  • 230VAC powering
 NCP-CM400P.png



Terminals
CM300P
8xFE(6xINT, 1xINT/WAN, 1xLAN)
CM400P
8xFE(6xINT, 1xLAN, 1xINTWAN), 2xGbE(1xINT,1xINT/RDU)
CM600P
8xFE(6xINT, 1xLAN, 1xINTWAN), 2xGbE(1xINT,1xINT/RDU)
Voice/Video
Voice and FAX codecs
G.711 A-law/U-law, G.722, GSM, ADPCM, Speex, T.38
Video codecs
H.263, H.263+
Signalling/Protocols
DTMF mode
RFC2833, SIP INFO, inband
Digital signalling
DSS1, QSIG
Provisioning
HTTP/HTTPS, SIP multicast
Network protocols
TCP/UDP/IP, RTP/RTCP, ICMP, ARP, DNS, DHCP, NTP, SIP, SRTP, TLS
Disconnect methods
Call Progress Tone, Polarity Reversal, Hook Flash Timing, Busy Tone
Security
Protocols
SRTP, TLS, HTTPS
Advanced
E-mail notifications, strong password
Physical
Powering
~230V±10%, 50Hz, 1A
Dimensions
67mm(H) x 482(W) x 310mm(D)
Work environment
Work temperature: +10˚C÷30˚C Air humidity: 40÷70%

NCP Gateways

If traditional TDM equipment needs to be handled, NCP-GW (Gateways) with possibility to install modules are required.

Characteristic features of NCP-GWx:

  • NCP Gateways (NCP-GWS/GWD) are connected to Call Manager with INT network interface
  • Shelves use protocols: DHCP, NFS, TCP/IP, ETH
  • GWx Gateways can be connected do INT interface directly or with usage of any L2 switches (within INT network). Network requires <2,5ms jitter.
  • We do not reccomend to connect NCP-GWS/GWS via VPN tunnels.

Specified system services are configured in network, that they are available. NCP-GW cooperates with:

  • internally
    • via IP-LAN with SIP-VoIP terminals, SIP-Video, CTS.IP and NCP-GW
    • via POTS-FXS ports with analog phones
    • via CTS-Up0 ports with Slican CTS system phones
  • externally
    • via IP-WAN with SIP trunks
    • via POTS-FXO ports with analog trunks
    • via ISDN-BRI ports with ISDN-S(2B+D) trunks
    • via ISDN-E1 with ISDN-E1(30B+D)
    • via GSM ports with mobile trunks



Available Gateway solutions:

GWx2B and GWx6S

Gateways, allowing to use any modules.

Gateway
Description
Preview
NCP-GWS2B

BOX housing - dimensions 218x44x225mm (WxHxD)
Capacity of max 16 equipment, brought on 8 terminals
Mainboard NCP-SP2BP.GWB (2 slots for EMS cards)
Controller card NCP-SP1CU.GWS
External 12V power supply with
5.5x2.1mm (MeanWell EA10521C) connector

GWS2B.PNG
NCP-GWD2B

BOX housing - dimensions 218x44x225mm (WxHxD)
Capacity of max 16 equipment, brought on 16 terminals
Mainboard NCP-SP2BP.GWB (2 slots for EMD cards)
Controller card NCP-SP1CU.GWS
External 12V power supply with
5.5x2.1mm (MeanWell EA10521C) connector

GWD2B.png
NCP-GWS6S

RACK SHELF-1U housing - depth 310mm
Capacity of max 48 equipment, brought on 24 terminals
Mainboard NCP-SP6BP.GWS (6 slots for EMS cards)
Controller card NCP-SP1CU.GWS

GWS6S.png
NCP-GWD6S

RACK SHELF-1U housing - depth 310mm
Capacity of max 48 equipment, brought on 48 terminals
Mainboard NCP-SP6BP.GWS (6 slots for EMD cards)
Controller card NCP-SP1CU.GWS

GWD6S.png



Available switch solutions:

Switch
Opis
Widok poglądowy
NCP-SWS24S

RACK SHELF-1U housing - depth 310mm
Connecting up to 24 NCP-GWS/GWD Gateways and NCP-CMx Call Manager
Features: 2xGbE; 24xEth; Power230Vac

SW24S.png