NCP Call Manager
Network Centric PBX is consisted of one (or two in case of redundancy system) Call Manager NCP-CM, connected to it Gateways NCP-GW and system capacity expanding Switch - NCP-SW shelves.
Call Manager alone is a fully working PBX, in which we can configure IP terminals, IP providers and all services. To use TDM equippment, additional GWS (24 ports) or GWD (48 ports) with expansion modulesare required.
NCP-PBX can cooperate with maximum three independent networks via LAN, INT ar WAN interfaces (depending on CM type).
Available Call Manager solutions:
| Call Manager |
Description |
Preview
|
NCP-CM300P
NCP-CM300P.BC
low traffic support |
FUNCTIONAL FEATURES:
- Up to 40 simultaneous voice calls
- Up to 3 simultaneous video calls
- Capacity: up to 5xNCP-GW, 58xTrunkGSM, 1xTrunkISDN-E1, 16xTrunkISDN-2B+D
- Support for 64xCTS (Upn and IP)
- Up to 100 WebCTI/PhoneCTI accounts
- Up to 300 subscriber equipment (FXS+SIP+CTS.Upn+CTS.IP)
- Up to 40 simultaneous channels recorded
- Storage space for 640h recorded calls (G.711 alaw codec)
- Billing buffer capacity of 500k events
HARDWARE FEATURES:
- RACK SHELF 1.5U housing - depth 310mm
- Mass storage device capacity: 60GB
- RJ45 interfaces: FE-LAN, FE-WAN/INT, 6xETH-INT
- 230VAC powering, buffer 12V DC in version NCP-CM300P.BC
|
|
NCP-CM400P.BC
average traffic support |
FUNCTIONAL FEATURES:
- Up to 100 simultaneous voice calls
- Up to 20 simultaneous video calls
- Capacity: up to 20xNCP-GW, 120xTrunkGSM, 6xTrunkISDN-E1, 32xTrunkISDN-2B+D
- Support for 400xCTS (Upn i IP)
- Up to 400 WebCTI/PhoneCTI accounts
- Up to 1000 subscriber equipment (FXS+SIP+CTS.Upn+CTS.IP)
- Up to 100 simultaneous channels recorded
- Storage space for 1530h recorded calls (G.711 alaw codec)
- Billing buffer capacity of 500k events
- Redundancy feature
HARDWARE FEATURES:
- RACK SHELF 1.5U housing - depth 310mm
- Mass storage device capacity: 120GB
- RJ45 interfaces: GbE-LAN, INT/RDU, GbE-WAN/INT, 8xETH-INT
- 230VAC powering, buffer 12V DC
|
|
NCP-CM600P.BC
heavy traffic support |
CECHY FUNKCJONALNE:
- Up to 300 simultaneous voice calls
- Up to 40 simultaneous video calls
- Capacity: up to 127xNCP-GW, 120xTrunkGSM, 13xTrunkISDN-E1, 32xTrunkISDN-2B+D
- Support for 800xCTS(Upn i IP)
- Up to 800 WebCTI/PhoneCTI accounts
- Up to 10k subscriber equipment abonenckich (FXS+SIP+CTS.Upn+CTS.IP)
- Up to 300 simultaneous channels recorded
- Storage space for 3400h recorded calls (G.711 alaw codec)
- Billing buffer capacity of 500k events
- Redundancy feature
HARDWARE FEATURES:
- RACK SHELF 1.5U housing - depth 310mm
- Mass storage device capacity: 120GB
- RJ45 interfaces: GbE-LAN, INT/RDU, GbE-WAN/INT, 8xETH-INT
- 230VAC powering, buffer 12V DC
|
|
Terminals
|
| CM300P |
8xFE(6xINT, 1xINT/WAN, 1xLAN)
|
| CM400P |
8xFE(6xINT, 1xLAN, 1xINTWAN), 2xGbE(1xINT,1xINT/RDU)
|
| CM600P |
8xFE(6xINT, 1xLAN, 1xINTWAN), 2xGbE(1xINT,1xINT/RDU)
|
Voice/Video
|
| Voice and FAX codecs |
G.711 A-law/U-law, G.722, GSM, ADPCM, Speex, T.38
|
| Video codecs |
H.263, H.263+
|
Signalling/Protocols
|
| DTMF mode |
RFC2833, SIP INFO, inband
|
| Digital signalling |
DSS1, QSIG
|
| Provisioning |
HTTP/HTTPS, SIP multicast
|
| Network protocols |
TCP/UDP/IP, RTP/RTCP, ICMP, ARP, DNS, DHCP, NTP, SIP, SRTP, TLS
|
| Disconnect methods |
Call Progress Tone, Polarity Reversal, Hook Flash Timing, Busy Tone
|
Security
|
| Protocols |
SRTP, TLS, HTTPS
|
| Advanced |
E-mail notifications, strong password
|
Physical
|
| Powering |
~230V±10%, 50Hz, 1A
|
| Dimensions |
67mm(H) x 482(W) x 310mm(D)
|
| Work environment |
Work temperature: +10˚C÷30˚C Air humidity: 40÷70%
|
NCP Gateways
If traditional TDM equipment needs to be handled, NCP-GW (Gateways) with possibility to install modules are required.
Characteristic features of NCP-GWx:
- NCP Gateways (NCP-GWS/GWD) are connected to Call Manager with INT network interface
- Shelves use protocols: DHCP, NFS, TCP/IP, ETH
- GWx Gateways can be connected do INT interface directly or with usage of any L2 switches (within INT network). Network requires <2,5ms jitter.
- We do not reccomend to connect NCP-GWS/GWS via VPN tunnels.
Specified system services are configured in network, that they are available. NCP-GW cooperates with:
- internally
- via IP-LAN with SIP-VoIP terminals, SIP-Video, CTS.IP and NCP-GW
- via POTS-FXS ports with analog phones
- via CTS-Up0 ports with Slican CTS system phones
- externally
- via IP-WAN with SIP trunks
- via POTS-FXO ports with analog trunks
- via ISDN-BRI ports with ISDN-S(2B+D) trunks
- via ISDN-E1 with ISDN-E1(30B+D)
- via GSM ports with mobile trunks
Available Gateway solutions:
GWx2B and GWx6S
Gateways, allowing to use any modules.
| Gateway |
Description |
Preview
|
| NCP-GWS2B |
BOX housing - dimensions 218x44x225mm (WxHxD)
Capacity of max 16 equipment, brought on 8 terminals
Mainboard NCP-SP2BP.GWB (2 slots for EMS cards)
Controller card NCP-SP1CU.GWS
External 12V power supply with
5.5x2.1mm (MeanWell EA10521C) connector
|
|
| NCP-GWD2B |
BOX housing - dimensions 218x44x225mm (WxHxD)
Capacity of max 16 equipment, brought on 16 terminals
Mainboard NCP-SP2BP.GWB (2 slots for EMD cards)
Controller card NCP-SP1CU.GWS
External 12V power supply with
5.5x2.1mm (MeanWell EA10521C) connector
|
|
| NCP-GWS6S |
RACK SHELF-1U housing - depth 310mm
Capacity of max 48 equipment, brought on 24 terminals
Mainboard NCP-SP6BP.GWS (6 slots for EMS cards)
Controller card NCP-SP1CU.GWS
|
|
| NCP-GWD6S |
RACK SHELF-1U housing - depth 310mm
Capacity of max 48 equipment, brought on 48 terminals
Mainboard NCP-SP6BP.GWS (6 slots for EMD cards)
Controller card NCP-SP1CU.GWS
|
|
Available switch solutions:
| Switch |
Opis |
Widok poglądowy
|
NCP-SWS24S
NCP-SW242S.P150 |
RACK SHELF-1U housing - depth 310mm
NCP-SW242S -26-port switch with layer 3 elements - without PoE and emergency power supply
NCP-SW242S.P150 -- 26-port switch with layer 3 elements - 24 PoE ports and emergency power supply
Connecting up to 24 NCP-GWS/GWD Gateways and NCP-CMx Call Manager
Features: 2xGbE; 24xEth; Power230Vac
|
|
