ITS - PBX firmware
From pubWiki-en
Revision as of 14:01, 5 September 2023 by Leszekj (Talk | contribs) (→What firmware version is in my Slican ITS?)
Contents
What firmware version is in my Slican ITS?
It is necessarily to connect to ITS using Internet browser. Next you should select panel: Update
Version 1.05.0170
- Fixes bugs
- Incorrect entries in Call History
- Incorrect presentation of CLIP in incoming calls to FXS equipment
Version 1.05.0150
- News
- Introduced possibility of logging in to neofon service in Orange (PL)
Version 1.05.0130
- News
- Added option to configure sending OPTIONS frame for VoIP trunk
- Changed way and frequency of downloading time from Keeper server
- Busy Signal Detection - Greece
- Fixes bugs
- No registration with SIP provider: T-Mobile (PL)
- Incoming traffic from SIP provider: IPcall (PL) does not work
- Errors when calling on internal calls when "automatic exit to external lines" is enabled
Version 1.05.0080
- News
- Added ability to configure range of RTP ports
- Support SIP provider: NETIA (PL)
- Support NTP real-time synchronization protocol
- Fixed bugs
- No incoming traffic for calls made by SIP provider: Freeconet (PL)
- No acoustics after returning from transferring an analog-voip call
- Delay in dialing digits after pressing flash
Version 1.04.0130
- News
- Possibility to define emergency output for subscriobers
- Outgoing method using digits "0" and "8"
- Protection against network attacks and SIP robots
- New menu which enables landuage and ITS location selection
- Corrected errors
- No green dot which confirms VoIP subscriber log-in
- Problems with acoustic after transfer call incoming via VoIP trunk
- Corrected maintenance of calls incoming from Freeconet provider (only Poland)
- Corrected maintenance of outgoing calls to Halonet and Dialog providers (only Poland)
Version 1.02.0010
- News
- possibility of time zone selection
- ringing time limitation for doorphone calls
- Fixed bugs:
- Wrong hour after time zone change.
- No possibility of transfer outgoing call by IP subscriber.
- Call limit for SIP account was increased to two, to enable call transfer executed on phone level (not on PBX level).
- Announced transfer for SIP account.
- No busy signal for calls incoming via any trunk and routed to busy VoIP subscriber.
- Improper calls routing for VoIP provider.
- While group upringing - after disconnect of busy phones, they didn't start ringing.
Version 1.01.1180
- Possibility of configuring up to 6 VoIP trunk in model ITS-0286.
- English language added. (Both GUI and announcements).
- Possibility of fixed assignment outgoing line to specified port.
- Calls history for established outgoing calls added - Pane Call log.
- PBX identifier added. Pane: Global options Field PABX Description
- Delay in DTMF sending for outgoing calls via FXO. Pane Lines (FXO) Field DTMF delay.
Version 1.01.1080
- Echo cancellation on FXO lines.
- Near-end crosstalk liquidation while operating with some DECT phones
- Outgoing calls routing via 0
- Access facilities: Login removal
Version 1.01.1010
- problem with disconnecting (from time to time) calls realized via analogue lines eliminated;
- possibility of establishing outgoing calls via different lines even if prefix is the same;
- PBX working modes launched;
- VoIP port status included in GUI;
- problems with call transit eliminated;
- once more upringing agents who were busy while start group upringing;
- call forwarding service to internal and external numbers;
How to use transferring call service
*72 phone number - unconditional call forwarding for all calls routed to this phone number
*73 - switch off call forwarding
Call forwarding service is valid until PBX reset
First production version
- 1.01.0820 - version issued in day of PBX premiere - 26.10.2009