Characteristic of Slican DPH.IP doorphone
Slican DPH.IP doorphone series connected to PBX via Ethernet network allows people who intend to enter protected area to communicate with people in this area. Additionaly, it allows to release electric lock controlling door or gate opening using door opening button (POD), telephone with which conversation is conducted, by selecting appropriate DTMF code - *, digit 1 or 2 on acoustics, and appropriately CTS phone pre-programmed button. It is possible to install additional DPH.IP-KS28CAM camera module to DPH.IP, which allows, using the Slican MessengerCTI application, to view immediate surroundings and people using doorphone.
Additionally, DPH.IP doorphones can be used as elements of ACS (Access Control System). This system allows use Slican PBX with DPH.IP doorphones to manage input/output control of users. ACS monitoring entry and exit people from building or protected area. It also makes it possible to limit entry of unauthorized persons to area under special protection. As part of configuration, system administrator can grants rights to users by defining access time intervals to given zone and access methods. All system events are logged and can be presented in form of detailed report.
In ACS system in DPH.IP-KS doorphones it is possible to release an electric lock controlling door or gate opening by means of:
- telephone during phone call, by selecting appropriate DTMF code - * or digits 1 or 2
- by making a call from a mobile phone to a separate municipal number for a subscriber using the Mobilephone or MessengerCTI service
- CTS phone by means of DTMF or pre-programmed button
- MessengerCTI.dektop or MessengerCTI.mobile applications
- after selecting user account number and PIN (DPH.IP-KS16DRF)
- proximity identifier
- POD button (door opening button)
In DPH.IP-CR0RF reader it is possible to release electric lock which controls opening door or gate by means of:
- proximity identifier
- POD button (door opening button)
- system telephone with pre-programmed button
Slican offers five types or DPH.IP-KSxxRF.C devices:
| |
|
| |
|
| |
|
| |
|
| |
Following functions are available in DPH.IP doorphone (varies, depending on DPH model):
- establish phone call using capacitive buttons or numeric keypad (not applicable to DPH.IP-CR0RF reader)
- two relays trigger:
- electrolock EZ
- additional relay STA (does not apply to DPH.IP-CR0RF reader)
- power supply from PoE Class 0 or 24 - 48V DC 15W (DPH.IP-CR0RF only from PoE)
- temperature range: -20 to +50o C (below 0oC response time of display may be extended to 10 seconds, DPH.IP-CR0RF should be protected against sunlight)
- security level: DPH.IP-KSxx - IP32, DPH.IP-CR0 - IP54
- COD (door opening sensor) and POD (door opening button) inputs. Both may cooperate with electrolock
- EZ or STA triggering (opening) by receiving "*" in DTMF code, depending on setting of appropriate parameter
- EZ triggering by receiving "1" in DTMF code
- STA triggering (second output) by receiving "2" in DTMF code- a single pulse with fixed duration is generated
- built-in RFID card reader (cards in Unique 125kHz standard, compatible with EM4102 system)
- possibility of triggering EZ or STA by holding registered RFID card or entering subscriber's number and PIN code from numeric keypad
- programming doorphone parameters from panel management application (IPx, MAC, CCT - ConfigMAN, NCP - ConfigWEB)
- possibility logging doorphones from outside user's LAN and via the Internet; initial configuration using SlicanDeviceConfig application
Maximum devices used depending on PBX type
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| (LowCost) |
|
| |
|
| |
Mounting
All DPH and DPH.IP-KSxxRFC series doorphones are manufactured in various designs and depending on the implementation. They can be installed:
- as over-plaster
- as under-plaster
- on the fence
