Zasilacze CTS en

CTS power supply

In some cases of using system phones, its recommended or even required to plug additional power supply, which improve or allow to work of the phone. Table below describes the types of power supplies used for CTS system phones.

Warning! To power up Slican system phones, use only dedicated power supply (12V/1.4A). As emergency other STABILIZED power supply with those paremeters can be used. Failure to comply can cause damage to the phone ! ! !.

*	System phone model	36V/160mA power supply	12V/1,25A RJ11 power supply	12V/1,25A	PoE
1	CTS-102.HT
2	CTS-102.CL
3	CTS-102.IP
4	CTS-202.CL
5	CTS-202.BT
6	CTS-203.CLBT
7	CTS-202.IP
8	CTS-203.IP
9	CTS-232>2 consoles
10	CTS-330.CL
11	CTS-330.IP
12	CTS-220.CL
13	CTS-220.IP
14	Konsole CTS-338			is using phone power	is using phone power

CTS.IP phone PoE power

CTS-220.IP meet standard 802.3af (class 0). They can be powered (along with consoles) from devices with PoE (Power over Ethernet) – powered from Ethernet Network. Examples:Slican PoE card, PoE switch, Power injector devices.

CTS102.IP phone doesn't meet 802.3 standard. Despite that it can be powered from ethernet passively, within voltage of 36-48V DC.

For specific case splitter Slican UTS-1C2T can be used to power phone passively. Connecting DC power supply with 36-57V voltage to DC input (any polarisation, power adequate for connected device) and phone to LAN/PoE input, we can power phone directly from Ethernet network.

Example:

---

Return to Instruction manual