Difference between revisions of "DPH16 - Doorphone using"
| Line 10: | Line 10: | ||
* Enter PIN code defined for specified user account - caption "OPEN", is s visible on display, simultaneously action defined as "DTMF action" is performed. | * Enter PIN code defined for specified user account - caption "OPEN", is s visible on display, simultaneously action defined as "DTMF action" is performed. | ||
| − | It is possible to trigger relay output by approaching RFID card to doorphone - | + | It is possible to trigger relay output by approaching RFID card to doorphone - caption "OPEN" is visible on display, simultanoeusly action defined as "RFID action" is performed. |
| − | + | If PBX subscriber dial extension number assigned to doorphone, call is established automatically, which is confirmed with caption "Incoming call". In this status conversation between phone and doorphone. Finishing call takes place after hang off handsetłożeniu słuchawki telefonu lub po naciśnięciu klawisza [[File:DPH16-end.PNG|30px]] na klawiaturze bramofonu. | |
Revision as of 10:50, 8 November 2011
DPH-16 user can perform following actions:
- Establish call with any subscriber after dialing extension number of this subscriber
- Trigger relay output of doorphpone
- Anwer incoming calls from any extension number
To establish call with any extension number appropriate number should be dialed from doorphone keyboard and press 
button. Caption "Call <dialed extension number>" is visible and message "Please wait for connection" and next melody defined as MOH can be hear in doorphone speaker. After lifting handset of phone with dialed extension number call is established automatically.
To trigger relay output following activities should be performed:
- Select from keyboard number of defined user
- Press button
- on display caption "Enter PIN" is visible - Enter PIN code defined for specified user account - caption "OPEN", is s visible on display, simultaneously action defined as "DTMF action" is performed.
It is possible to trigger relay output by approaching RFID card to doorphone - caption "OPEN" is visible on display, simultanoeusly action defined as "RFID action" is performed.
If PBX subscriber dial extension number assigned to doorphone, call is established automatically, which is confirmed with caption "Incoming call". In this status conversation between phone and doorphone. Finishing call takes place after hang off handsetłożeniu słuchawki telefonu lub po naciśnięciu klawisza 
na klawiaturze bramofonu.
