Difference between revisions of "ITS - Connecting with PC"

From pubWiki-en
Jump to: navigation, search
(What IP address is assigned to Slican ITS by DHCP server? - *947)
(What IP address is assigned to Slican ITS by DHCP server? - *947)
Line 8: Line 8:
 
=What IP address is assigned to Slican ITS by DHCP server? - *947=
 
=What IP address is assigned to Slican ITS by DHCP server? - *947=
 
{{warning|To listen IP address code '''*947''' should be dialed from tone phone connected to any FXS port}}
 
{{warning|To listen IP address code '''*947''' should be dialed from tone phone connected to any FXS port}}
* Odsłuchany adres należy wpisać do przeglądarki internetowej i przejść do tej strony.
+
* Listened address should be entered to browser address bar and confirmed by Enter.
 
* Domyślne parametry dostępu to: <big>'''hasło:''' slican</big>
 
* Domyślne parametry dostępu to: <big>'''hasło:''' slican</big>
 
Powyższe ustawienie (Slican ITS jest klientem DHCP) jest domyślne-fabryczne.
 
Powyższe ustawienie (Slican ITS jest klientem DHCP) jest domyślne-fabryczne.

Revision as of 13:30, 10 August 2010

Connecting PC with PBX can be done using Internet browser. Congruent browser are listed below:

Congruent www browsers

  • FireFox 3.5.x and 3.0.x - recommended by manufacturer
  • Google Chrome 3.x

What IP address is assigned to Slican ITS by DHCP server? - *947

Warning! To listen IP address code *947 should be dialed from tone phone connected to any FXS port
  • Listened address should be entered to browser address bar and confirmed by Enter.
  • Domyślne parametry dostępu to: hasło: slican

Powyższe ustawienie (Slican ITS jest klientem DHCP) jest domyślne-fabryczne.

Nie mam sieci z serwerem DHCP - jaki jest domyślny adres centralki?

Warning! Aby nadać centralce domyślny adres IP i wyłączyć klienta DHCP należy wybrać tonowo z telefonu podłączonego do FXS kod *930
  • Wybranie usługi *930 spowoduje:
    • wyłączenie klienta DHCP (o ile wcześniej był włączony) co zostanie potwierdzone komunikatem "Usługa została przyjęta" a następnie po ok 3 sekundach nastąpi reset centrali. Po resecie centrala będzie miała następujące ustawienia sieciowe:
IP - 192.168.0.247
MASKA - 255.255.255.0
BRAMA - 192.168.0.1
DNS - 194.204.159.1
  • Brak zmian w ustawieniach (o ile wcześniej DHCP był wyłączony) co zostanie potwierdzone komunikatem "Usługa aktywna".

Back