Revision as of 06:52, 11 August 2010

Connecting PC with PBX can be done using Internet browser. Congruent browser are listed below:

Congruent www browsers

Warning! To listen IP address code *947 should be dialed from tone phone connected to any FXS port

Listened address should be entered to browser address bar and confirmed by Enter.
Default access password: slican

Above mentioned setting (Slican ITS is DHCP client) is default.

Warning! To assign default IP address and switch off DHCP server, code *930 should be dialed from tone phone connected to any FXS port

Selecting service *930 causes:
- switching off DHCP client (if it wasn't switched off earlier), it is confirmed by voice message "Service accepted", then after circa 3 seconds PBX resets automatically. After reset following network settings are stored in PBX:

IP - 192.168.0.247
MASK - 255.255.255.0
GATEWAY- 192.168.0.1
DNS - 194.204.159.1

- no settings change (if DHCP was switched off earlier), it is confirmed by voice message "Service active".

@@ Line 20: / Line 20: @@
   GATEWAY- 192.168.0.1
   DNS - 194.204.159.1
-*Brak zmian w ustawieniach (o ile wcześniej DHCP był wyłączony) co zostanie potwierdzone komunikatem "Usługa aktywna".
+** no settings change (if DHCP was switched off earlier), it is confirmed by voice message "Service active".
 ----
 [[Slican_ITS| Back]]
 [[Category:ITS]]