Difference between revisions of "MSB-1102 Instruction manual"
From pubWiki-en
(→MSB-1102 Structure) |
(→MSB-1102 Structure) |
||
| Line 13: | Line 13: | ||
MSB-1102 is equipped with following input/output ports: | MSB-1102 is equipped with following input/output ports: | ||
*sockets AB1/AB2 type RJ11 for connecting 2 subscriber ports in PABX, | *sockets AB1/AB2 type RJ11 for connecting 2 subscriber ports in PABX, | ||
| − | *socket 2REL<ref name="funkcje"> | + | *socket 2REL<ref name="funkcje">Device uses 2 independent channels. It means that simultaneously two functions can operate. Ex: 2 sensors, 2 relays or mix.</ref> (REL1/REL2) type RJ45 which includes: |
**sensor terminals (SNS1/SNS2) – configurable, | **sensor terminals (SNS1/SNS2) – configurable, | ||
**monostable relay terminals<ref name="czas_impulsu>Release pulse time is about 1 second.</ref> – configurable, | **monostable relay terminals<ref name="czas_impulsu>Release pulse time is about 1 second.</ref> – configurable, | ||
Revision as of 08:57, 10 January 2011
Contents
Information
Slican Multi Switch Box MSB-1102 it is device assuring cooperation between Slican PABX[1] and sensors, relays, alarm systems, paging systems etc.
Subscriber port in PABX should be configured as Sensor or Relay – depending on required function.
MSB-1102 Structure
MSB-1102 is equipped with following input/output ports:
- sockets AB1/AB2 type RJ11 for connecting 2 subscriber ports in PABX,
- socket 2REL[2] (REL1/REL2) type RJ45 which includes:
- sensor terminals (SNS1/SNS2) – configurable,
- monostable relay terminals[3] – configurable,
- socket ZAS – local power supply from external source.
Connecting and preparing for configuration
Configuration Jumpers
| Plik:MSB Widok zworek small.png |
|
Operating modes
| Zasilanie | Sensory (SNS) | Przekaźniki (REL) |
|---|---|---|
| Wariant bez zasilacza | Plik:MSB Tryb DCI.png |
Plik:MSB REL NO NC small.png |
| Wariant z zasilaczem | Plik:MSB tryb CCS.png | Plik:MSB VON VOFF small.png |
Zgodnie z powyższym MSB-1102 musi być zasilany z lokalnego zasilacza w trybach pracy:
- Sensory: Tryb CCS
- Przekaźniki: Tryb VON/VOFF
Parameters
- prąd pobierany z zasilacza w trybie CCS maks. 20mA.
- pobór prądu w trybie DCI maks. 10mA na sensor.
- parametry styków przekaźnika (dla trybów NO/NC i VON/VOFF) - max 42Vac/0.5A, 42Vdc/1A
- zakres napięcia uaktywniającego sensor w trybach DCI i CCS to 5-30V[4]dc.
|
Certificate of conformity, proper device disposal
References
- ↑ MSB-1102 can be used with firmware version 4.10 or later. It can be used with Slican PABXes: CXS-0424, CCT-1668, MAC-Zero, MAC-6400.
- ↑ Device uses 2 independent channels. It means that simultaneously two functions can operate. Ex: 2 sensors, 2 relays or mix.
- ↑ Release pulse time is about 1 second.
- ↑ Uwaga: Istotna jest polaryzacja
