Difference between revisions of "Version 4.10"
From pubWiki-en
(→Embedded recording system change) |
(→New functionalities in Slican Servers) |
||
| Line 28: | Line 28: | ||
** asking sensor status. | ** asking sensor status. | ||
* Data send by embedded recording system can be coded | * Data send by embedded recording system can be coded | ||
| − | {{warning|Embedded recording system change required.}} | + | {{warning|Embedded recording system change required. If you use embedded recording dydtem with RecordMAN2.client, RecordMAN2.server or both, you should change used applications to version 3.00.}} |
---- | ---- | ||
[[PABX firmware| Back]] | [[PABX firmware| Back]] | ||
Revision as of 12:04, 11 February 2011
Firmware 4.10 - availability without licence (serial numbers)
Version 4.10 is delivered in brand new PABXes, for older PABXes license code is required - according rules presented below.
| Model | Serial no. |
|---|---|
| CCT-1668 | 11281 and higher |
| MAC-6400 | 0644 and higher |
| CXS-0424 | 0957 and higher |
New hardware
- Maintenance of CTS-203.IP-PoE phone
- MSB Multi Switch Box relay and sensor system for Slican MAC-6400, CCT-1668 and CXS-0424 - system is connected directly to subscriber port.
New functionalities in Slican Servers
- Maintenance of IO/RS card in Slican CXS-0424
- Announcing by SMS:
- about service alarms concerning with PABX
- about events triggered by:
- sensor (using MSB-1102 and/or IO/RS in Slican CXS-0424),
- manual working mode change,
- attain free minutes limit.
- Maintenance of MSB-1102:
- relay control:
- by dialing extension number assigned to relay,
- relay status confirmed by announcement.
- asking sensor status.
- relay control:
- Data send by embedded recording system can be coded
|
