CTS-220.IP-GNM Safety requirements
Safety Requirements and Certificate of Conformity for CTS-220.IP-GNM devices
Safety Requirements applicable to Operations and Maintenance of Microphone call station
It is essential to comply with rules governing safety and use to ensure correct operation of this device.
Below are basic elements to be taken into account by manufacturer in case of any complaints and claims submitted by users.
Rules relate to installation, location and requirements for electrical power supply and data communication network.
Installation:
- Only authorised or qualified manufacturer's service teams are allowed to install and initialise device.
- All installation procedures should be performed in compliance with assembly principles as well as any occupational health and safety regulations.
Working Environment:
- Microphone call station must not be installed in closed rooms featuring high humidity levels. Such rooms may reduce service life and quality of electronic component functions.
- Given risk of flooding, call station should not be located near water containers or water sources (such as water pools, valves, etc.).
- Device must not be installed in rooms featuring considerable dust levels or strong electromagnetic field.
Microphone call station may demonstrate irregular operations, interferences, or box discoloration if installed at places exposed to:
- Direct sunlight,
- Frequent or strong vibrations or mechanical impacts,
- Live antenna radiation.
All devices connected to call station must have certificates of conformity with standards in force in European Union.
Security measures
To reduce fire risk, electric shock or injury, please read security recommendation.
1. Carefully read instruction provided in this manual.
2. Comply with any instructions provided on call station.
3. During cleaning, unplug Microphone call station from phone line. Use damp cloth. DO NOT use liquid cleaners or aerosol.
4. DO NOT use call station near water: sinks, bath tubes, water bowls, washing machines, swimming pools or other humid areas.
5. Plug in call station in safe area. Make sure, line cable is placed out of way of pedestrians. """DO NOT""" lay any items on line cables.
6. Avoid spilling any liquids on call station. It may cause short circuit, fire or electrocution and is not covered by warranty.
7. Do not overload electrical line, it can cause fire or electrocution.
8. NEVER put any items into call station, it may cause short circuit and fire.
9. Ask qualified sevice, if call station requires any repair. Electrocution is possible during disassemble, opening or closing housing wrong.
10. Avoid using call station during storm. There is little chance for electrocution.
11.DO NOT use call station when near gas leak.
12. Unplug call station from line and call for qualified service when:
• Any fuild is spilled on call station.
• Call station has been exposed to rain or water.
• Call station do not operate proper despite, following manual.
• Call station fell or housing has been destroyed.
• Call station shows significant change in performance.
All devices connected to Microphone call station should have declaration of conformity with UE norms.
Declaration of Conformity and proper disposal of product
|
|
