TouchCTI Instruction manual Tab:Conference

From pubWiki-en
Revision as of 08:35, 5 January 2011 by Grzegorzg (Talk | contribs) (→‎Example of screen with upringing conference)

Jump to: navigation, search

Conference creating methods

Creating conference rely on gathering all conference parties[1] and establishing call with all these parties.

Quick conference creating

  1. From tab Zakladki contacts 24.png Contacts: Contact (button) selection - to this button conference group should be assigned[2]. Attention: Such group immediately start ringing!
    Next tab Zakladki conference2 24.png Conference should be selected to managing conference.
  2. From tab Zakladki contacts 24.png Contacts: Group or subgroup of contacts should be prepared, if there is no, it should be prepared. -> Entering in Edit mode. -> Selecting tab with this group or subgroup of contacts. -> From context menu - select option Conference.png Add to conference.

Manual conference creating

Quick and manual conference creating can be joined together.

  • From tab Zakladki conference2 24.png Conference -> press button Add plus green 24.png Add -> Conference gathering pane opens.
Io TouchCTI conference.JPG
  1. Select and touch specified position.
  2. This position is immediately inserted into gathering conference pane. Point 1 should be repeated until selecting all conference parties.
  3. Sources of conference participants can be:
    1. Zakladki contacts 24.pngContacts
    2. Numbers dialed manually using Zakladki keyboard2 24.pngKeyboard
    3. Numbers from Phone Zakladki book2 24.pngBook
    4. Numbers from Zakladki history 24.png History
  4. Accept set of numbers with OK button

Example of screen with gathered conference

Io TouchCTI participants.JPG

Managing conference

To start conference upringing press button Bell 32.png Ring all

Conference status during upringing

During conference upringing status of every conference participant is visible:

  • V2 bell 24.png - Upringing of conference participants continues.
  • Call er 24.png - Call was rejected or participant doesn't answer during 30 seconds.
  • Zakladki conference2 24.png - Participant was added to conference.

Example of screen with upringing conference

Io TouchCTI conference controls.JPG

Activities possible to execute during conference

Using conference control buttons

  1. Add plus green 24.png Add new conference parties.
  2. Delete x red 24.png End - finish conference and disconnect all parties.
  3. Mic dark blue off 24.png Mute - mute all conference parties, changing mode to individual voice transmission [3]. Next selecting this button switch on microphones to all conference parties.
  4. Managing conference without necessity of participation in this conference.
    1. Lala handset horizontal3 red 32.png Leaving conference[4].
    2. Lala handset call3 green 32.png Back to conference

Using individual control buttons for conference parties

  1. Delete x red 24.png Disconnecting from conference specified party.
  2. Mic dark blue 24.png/Mic dark blue off 24.png In normal mode mute/unmute specified conference party. In individual voice transmission mode - grant voice to specified conference party.

References

  1. ↑ During established conference additional parties can be add.
  2. ↑ Such conference group could be defined using CofigMAN application.
  3. ↑ Individual voice transmission mode enables to mute and unmute specified person using one button
  4. ↑ After leave conference normal operation of TouchCTI can be restored. Additionally, even while participating in conference, incoming calls are signal by TouchCTI.

Back

Retrieved from "https://pubwiki.slican.com/index.php?title=TouchCTI_Instruction_manual_Tab:Conference&oldid=3943"