Difference between revisions of "NCP technical data"

Revision as of 08:29, 30 December 2021

RACK SHELF housing - 1.5U; depth 310mm;
scalable, modular construction;
remote and local management using PC via: LAN, WAN or Internet;
intuitive management using WWW GUI via Web Browser - ConfigWEB;
maximum capacity of 10 000 internal (depending on Call Manager's model);
maximum simultaneous calls quantity of 500 (depending on Call Manager's model);
VoIP feature available in basic version;
redundancy feature for Call Managers: backup NCP-CM device, that takes over system control in case damage of one of them (for CM400P and CM600P);
dedicated digital and VoIP system phones;
ability to configure system phones using Web Browser;
provisioning for SIP phones (Slican VPS-9xx, Yealink T2x, T3x, VP530);
calls registration system content available in basic configuration;
managing the costs of calls and call tariffs by using the internal server mechanisms and an additional application – BillingMAN,;
subscriber services confirmed with voice messages;
dedicated computer applications:
- BillingMAN - analysis of the cost of calls
- RecordMAN.client - management of recorded content
- RecordMAN.server - recording backup
- PhoneCTI - support program for the subscriber
- WebCTI - subscriber account management via the Web;
internal CLIP signalling and transfer of public signals;

Connectors (available in modules, installe in GWS or GWD gateways):

ISDN 2B+D – DSS1 protocol (EURO – ISDN), MSN i DDI,
ISDN 30B+D – DSS1 protocol (EURO – ISDN), DDI,
public analogue lines (POTS), according to ASS signalling,
GSM – Tri-Band 900/1800/1900MHz
VoIP – according to SIP protocol (v.2.0), eSSLv2(own Slican linking protocol)
Up0 – sterminals for digital system phones;
advanced call handling - flexible incoming and outgoing traffic forwarding, call center, queues;
personalization of internal numbers - voicemail, user announcements, call waiting feature, voicemail2mail, fax2mail;
advanced diagnostic, calls status;
notifications and services log;
network traffic analyzer;
power supply from alternating current network ~230V, 50Hz;
power supply with battery-sustaining work at power failure (optional);
protection of cards against over voltage in the telecommunications network.

@@ Line 4: / Line 4: @@
 * intuitive management using WWW GUI via Web Browser - ConfigWEB;
 * maximum capacity of 10 000 internal (depending on Call Manager's model);
-* maximum simultaneous calls quantity of 300 (depending on Call Manager's model);
+* maximum simultaneous calls quantity of 500 (depending on Call Manager's model);
 * VoIP feature available in basic version;
 * [[NCP_redundancy|redundancy]] feature for Call Managers: backup NCP-CM device, that takes over system control in case damage of one of them (for CM400P and CM600P);